See likes

See likes given/taken


Posts you liked

Pages: [1] 2
Post info No. of Likes
Re: Recommendations for a carbon saddle? Just received the saddle today via FedEx. Sticker price is ¥699 (~US$105) without shipping and handling, so maybe expect it to retail at that price.

Measurements on the tag were accurate (275mm x 145mm), with the sticker on the packaging stating a 275x150.

Weighs slightly less on my kitchen scale than the 270g advertised.

Looks like they will be coming out with carbon and titanium rail versions.

Smacking this on today and testing it out.

*EDIT*
Post-ride

Did a couple of two hour rides in two different bibs (Rapha and Monton).
I have only tested the Specialized Romin Evo at a shop for 15 mins so I cannot make any direct comparisons.
I can however compare to my previous Chiner Selle Italia saddle that I've ridden for ~2000km.

Pros:
I realise that comfort is supposed to come from the bib padding and not saddle padding but I really did feel a difference in both comfort and support.
I was adjusting my position less and didn't get any numbness in my ass. I felt planted, and even in different positions, my sit bones were well supported.

Cons:
Mud and gunk got trapped in the holes and required some slightly higher pressure washing.
Weight can definitely be a turn off, but I should be the one shedding weight  :(

Mind you, I'm an unfit 91kg rider mostly cycling on a smart trainer, but I'm a convert. Will definitely be ordering the titanium rail version in the future for my brother as a christmas gift (and maybe one for myself).
It's a fifth of the price of a branded 3d saddle for my region, and gives a much better value for my money.
May 24, 2022, 12:27:18 AM 		1
Re: Velobuild VB-R-218 Hi everyone!

New to the forum and this is my first post.
I just wanted to report that I have a V BR 218 in the rim brake version on its way to me.
I’ll send some pics and keep you updated on the build process.

I too would have preferred a non counterfeit design. But I wanted a direct mount rim brake frame with internal cable routing that I liked the look of and that does not look like a Tarmac or Venge. That narrowed it down to this one.

The plan is to transfer my existing parts and wheels over to this frame.
I currently got a Ridley Helium in its low spec T700/T800 version from 2016. Frame weight is just below 1000g. This frame in XXL should be between 1200 and 1300g. I’m fine with that since it’s pan flat where I live.

The Helium in its current build is 7.1 kg ready to go with pedals and Garmin mount. So this one should ideally still be in the 7.5kg range.

Let’s see if I’m right.

Cheers
June 19, 2022, 04:01:32 AM 		1
Re: Velobuild VB-R-218 Yep. That's mine.

First off thanks to all the regular posters on this forum for all the knowledge they share!

I was considering a 177 back in April, but when they introduced the 218, I decided to give that a shot instead.

I ordered the XL frame on 4-18-22, they shipped on 5/6 and I got the frame on 5/12. I was pretty pleased with that speed.
I went with matte black, which maybe helped getting it a little quicker.

Wheels are elite SLT 50mm deep 29mm wide and the groupset is Sensa Empire.
No issues with the frame, other than the challenges of getting the cables through the integrated bars.  Being my first build, I didn't think it was too bad.

I've only had time to get about 30 miles in so far, but no problem to report yet. I did put a little tape on my seat post, so I can check to make sure it's not slipping over time, as that's been an issue on other velobuild frames.

My other bike is an aluminum endurance frame, so this should be a lot lighter and quicker. The bathroom scale has the 218at just under 19.5 lbs, my endurance bike is 25 lbs.
June 19, 2022, 08:10:41 PM 		1
Re: Velobuild VB-R-218 No, the mount didn't come with. I found it on aliexpress:
https://www.aliexpress.com/item/3256803631474734.html?spm=a2g0o.order_list.0.0.550218022MkFKA&gatewayAdapt=4itemAdapt

It fits well on the bars. I'm just hoping it holds up well with the weight of my Karoo2 and headlight on it.
June 21, 2022, 10:04:22 AM 		1
Re: Velobuild VB-R-168 Frame I have been reading a lot about the VB-R-168 frame and ordered one a month ago. Received it last monday and started building. Frame is a size 58 in Chameleon green matte. When the sun hits it at the right angle the bike is purple!

Ultegra groupset with 105 cranks and Fulcrum Racing wheels. I still need to do some adjusting with the groupset to make it run smoother.

Quality of the frame is good, paint looks great and everything was complete. Very happy with Velobuild.

I'll post better pictures when it's completely finished i've done the first big ride!

Coming upgrades; skinwall tyres and some custom stickers.
June 24, 2022, 06:50:02 AM 		1
Re: Velobuild VB-R-218 Hi everyone!

I promised to update everyone as soon as I received my frame. Well, it took longer than expected because there was a bit of a mishap.
Velobuild shipped my frameset after 10 days, exactly as promised. It took another three weeks for it to get to Germany. That's longer than usual but still perfectly OK.

However, upon unpacking I realized that I received a disc brake frameset when I had actually ordered the rim brake version. I sorted it out with Chris and I will now get my actual frameset. The disc brake frame will now be shipped on to another customer.

However, since I had it lying around for a week or so, I made some pics and weighed everything for y'all. So here it is. Frame Size is an XXL. Handlebar is 120/40.

Overall quality seems perfectly OK for the price. Some minor imperfections in the carbon finishing here and there, maybe the caliper seats are not perfectly faced, BB threads are OK, bearing seats in frame and fork as well.

I have never seen a Dogma F in real life but from what I can see on the internet, it's a carbon copy. It even has the asymmetrical rear seat and chain stays as you can see in the pics.

More pics and details to follow. I also shot a few pics from inside the headtube seattube and downtube.

Cheers
Sebastian


I ordered it with custom paint, which will add some weight, I guess.
July 10, 2022, 04:06:08 AM 		1
Re: Velobuild VB-R-218 Here are a few more details.
I've made some shots from the inside of the frame. Everything looks fairly normal judging from my experience with other frames.
The headtube area has some wrinkles. Some of it might be resin pooling. Some of it might be wrinkles in carbon sheets. Make of it what you will. I've seen similar things in other frames. I think it should be fine as this is not a lightweight frame and the headtube area seems fairly overbuilt. But obviously there's no way to know for sure unless you have someone scan and/or x-ray it.


July 11, 2022, 10:22:27 AM 		1
Re: Xoss/iGPSport, other computer companies? I did order it today on aliexpress: https://www.aliexpress.com/item/1005004540845201.html
The EUR/USD hurts but after riding with a friend with a Varia, I'm convinced it helps when riding solo.
And I like the brand.
July 19, 2022, 10:24:52 AM 		1
Re: Pulled the trigger on the Elite Wheel DRIVE wheelset Man, was mine really on there tight.  I had to take it to a my LBS and they even had a hell of a time unscrewing the end cap thingy.  They finally got it.  Watch out though, those notches on the other end where you use "butter knife" or whatever to hold it will chip away if you aren't careful then it will even be harder to hold it. 

I emailed EliteWheels if they had a video on how to do this & wow did they come through.  I had this video waiting for me in my email about 24 hours later.
July 27, 2022, 09:22:39 AM 		1
Re: Velobuild VB-R-218 I got a XS I am 5'6"  tall.
August 28, 2022, 03:36:58 PM 		1