See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) The HA on the Carbonda says 69 so I'd cross that off straight away. I'm building an Ican p9 with 180front and 150rear, I'd weigh around 105kg, frame seems well built and strong but I've no real world experience yet.
June 26, 2021, 09:06:58 AM 		1
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) Yeah, I'm 6 foot on the dot and the large seems perfect but any taller would be an issue I'd say.
June 26, 2021, 09:17:11 AM 		1
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) I have  a P9, i've done many trails and some bike park.
I was only limited by my tyre choice (thin sidewalls, punctured badly).
The frame is solid. I'm 105kg.



June 27, 2021, 06:05:28 AM 		1
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) Could definitely fit a 2.6 on the back, I've a wtb 2.4 at the moment and there's loads of space
June 27, 2021, 07:14:01 AM 		1
Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings) Frame looks amazing, love the paint scheme, recently finished my build and the shock bushings caused me a bit of trouble as everything I had read told me in needed 22x8mm top and bottom, this worked with the included (with Ican hardware) bushing spacers but I had a small it of lateral play.

I then bought 30mm x 8mm top and 25.4mm x 8mm bottom to install without the spacers and it's been perfect so far. I bought my bushings from https://www.offsetbushings.com/ with a 1 degree offset to slacken the bike a bit. Been riding it for around 3 weeks now and everything is going good. Best of luck with the build.
July 27, 2021, 08:16:08 AM 		1
Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings)
Quote from: mb2bike on July 29, 2021, 10:34:15 AM
Thinking about a 170mm Rockshox Lyrik in Boxxer Red or a Marzocchi Bomber Z1. Favoring the Lyrik though!

Already ordered the bushings. Looking forward to receiving them.

I'm about to change my 160mm Lyrik to a 170 with another air shaft. I just need a little more travel out of this rig now.

Also planning on buying a set of offset head cups to slacken it out to 64.5
July 29, 2021, 04:13:12 PM 		1
Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings) For IS the angleset that exist is the 9point8 and it’s only for is41/is52

https://www.9point8.ca/index.php?route=product/product&path=124&product_id=261
July 30, 2021, 09:56:20 AM 		1
Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings) I spoke with Wolf Tooth Components. I asked about use of their Geoshift headset in an integrated headset head tube. This was the email resonse I recieved.

"Our GeoShift headsets are designed to replace the headset cups. The GeoShift is designed for frames that use replaceable bearing cups. Frames designed for integrated (IS) headsets do not have removable/replaceable bearing cups.  The (IS) frame uses a bearing surface that is machined into the frame or uses a permanent bearing surface that has been bonded to the frame. Unfortunately the GeoShift is not compatible with (IS) frames.

Let us know if we can help with anything else."


 
July 30, 2021, 01:55:57 PM 		1
Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings) I just spoke with a salesperson from a company Called 9 point 8. They have a head tube slacking modification coming out in September that will slacken the head angle of an integrated headset with a 42mm top diameter. They said just be patient. It is a little different in that you use your integrated headset bearings in this insert. Could be a game changer for anybody with an older Chinese frame that wants to modernize it a bit.
July 30, 2021, 05:58:53 PM 		1