See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Carbonda Cfr 1056 Hi all. I wanted to share a pic of my completed CFR1056 build as well as thank everyone for the contributions to this thread that helped me figure it all out. This is my first bike build, so there was a ton of learning in the process. A particular thank you to "2old2mould" for sharing his file for design that I leveraged in communicating with Wing. Details on what I ended up with:

The big stuff:
Frame: FM1056 Size M. (I'm 5'10 w/ 32" inseam and not super fit/flexy). Internal routing. 2-tone paint glossy.
Bottom Bracket: BSA-68
Groupset: Shimano 105 r7000. Hydraulic disc brakes, 11 speed.
Wheels: Elitewheels ENT Disc. 45mm depth; 28mm external width. Tubeless compatible.
Tires: Continental Grand Prix S TR - 28mm
Power Meter: Stages L Side for Shimano r7000
Stem: FSA SMR ACR Stem - 90mm    
Headset: NO. 55R 1.5" ACR STD
Handlebar: Ritchey WCS Streem Internal Routing Handlebar
Pedals: SHIMANO PDM520 Clipless SPD

The little stuff:
Hydraulic Hoses: Shimano SM-BH90 Disc Brake Hose
Shifter Cables: Shimano Dura-Ace R9100 Shift Cable Set
Tubeless Tape: Zukka Tubeless Tape 23mm
Handlebar Pads: Selle Italia Bar Tape Shock Absorbing Pads
Bar Tape: Domain Cycling Handlebar Tape & Bar Ends (94" x 1.2")

Build Learnings: Building the bike was an adventure and YouTube intensive. I had three major issues. First, an end cap for the front wheel hub went missing during the build, and since I didn't know better, I didn't realize a part was missing. This required finding a replacement. As the wheels are from a China based company, that took a lot of work to get sorted out. Checking for loose pieces everywhere before throwing out packaging would have saved me from this. Second, the original lock ring I had for the front brake rotor was too large and rubbed against the fork. I had to swap to a TRP Centerlock ring that was angled (narrow on the outside edge) to create space. Third, the holes for the rear brake caliper were slightly misaligned. This created rub between the brake pads and the rotor even without squeezing the brake levers. My local bike shop was unable to fix this issue, and Wing wasn't responsive. After ~50 miles of riding, the brake pads wore down a bit to allow free movement, but it feels like riding into a headwind until that happens. Will be annoying with each new set of pads. Fourth, while I wanted to go fully integrated, I wasn't sure on fit and feel. So I used the semi-integrated cabling route through the stem to allow some extra cable length. Once I've dialed everything in, I may go through the effort of routing through the handlebar directly and going fully integrated.

I did have my local shop complete an inspection/tune on the bike before riding it, and they found a few mistakes I made and corrected them. I highly recommend going that route if this is your first build or you lack 100% confidence in your skills. Overall, great experience.
March 27, 2023, 05:06:25 PM 		1
Re: Carbonda Cfr 1056 Hello everyone,
I too wanted to thank everyone for the many tips...
Here are the pictures of the bike, mounted with SRAM red.

Assembly went well... the main difficulties were related to my ignorance... for example, finding the front derailleur sheath stop...
I opted for integrated wiring, with CHB1036 handlebars. Patience is needed... once the sheaths were in place, some cables jammed because of the angles of the handlebars... back to work!
Next, I wanted mechanical disc brakes for weight reasons. I'm pretty happy with the result.
I must have done 600 / 700kms with the bike.
I'm very happy with the way it rides: comfortable and light!
Bike adopted!
June 27, 2023, 02:53:28 PM 		1
Re: Carbonda Cfr 1056 Good evening everyone, in the meantime I have received my crf 1056 size XL and I have also assembled it.
Sram Force groupset, Senixc PR3 BB BSA crankset, DT Suisse PR1400 Dicut wheels and Aliexpress handlebar because the Carbonda one didn't have the measurements I wanted.
Transparent matt paint on UD carbon.

No assembly problems, no irregularities.
Carbonda very fast and courteous communication via Skype, they send photos in real time.
excellent finishes, only flaw, painting times a little long.







I need to replace the headset spacers, do you have any advice on where to find them?
September 15, 2023, 03:51:32 PM 		1
Re: Carbonda Cfr 1056 very beautiful compliments.  This frame is really beautiful and adapts well to the types of use.
September 26, 2023, 05:28:03 AM 		1