See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Pinarello (Chinarello) Dogma F12 build Rear brake mount is for 140mm disc and adaptor for 160mm wasn´t included in the caliper in the groupset. Only for front.

It´s fitted very loose with a towel so it doesn´t fall out. I guess next project will be my wall :) I took GS instead of SS so 11-32 or 11-34 could be used if I want to climb one day. I also own 11-32 and 11-28 already.

After mounting fork and headset, I heard a clicking sound inside the head tube. I removed it and notice still some carbon left. The break hose hooked in this and made a click. I need to move more than 60 degrees for this to happen. I didn´t dare to touch this so i streched the break hose a bit tighter and the clicking is gone but I can hear the hose touching the carbon inside.

A lot of things in the floor. Prologo Dimension CPC NACK is mounted.

I didn´t choose the centerlock Ultegra disc for this. All other wheels have 6 bolt so it took another disc.

Weight without chain and handlebar tape is 7,4kg currently.
September 04, 2021, 06:03:14 AM 		1
Re: Pinarello (Chinarello) Dogma F12 build Battery is charged and ready for some setup. The RS910 box is used. It didn´t fit the included mounting parts so minor sanding was needed on both RS910 and mounting brackets before they could be fit into the frame.

I found very slimmed bottle cage holders. Only 35 grams for a pair.

Supacaz sticky kush classic bar tape mounted with Rose zonePax SL gel pads on the drops. The curve of the bar made it a pain to mount the tape without cheat with an extra piece of tape. Now I need to decide if I should glue it or use the included fastening tape.
https://www.rosebikes.se/rose-zonepax-sl-gel-pads-117496?product_shape=standard&article_size=Standardgel insert.

Comparing my cyclocross with F12. The bar should be on 25mm but it´s on 50mm now until I do the bikefit.

Ugly electrical tape until now. You can see the gel inserts on the cyclocross bar. It will build a lot so I skipped it on the top on the F12. Garmin/Wahoo mount is included from seller. A bit heavy so I would prefer a lighter mount.

Testing both SH11 +-3 and SH12 +-2 cleats.

It will be interesting to try a carbon shoe instead of fiberglass this time.
September 04, 2021, 06:03:26 AM 		1
Re: obmbicycle.com / Taiwan carbon factory store
Quote from: shenlong1337 on September 29, 2021, 07:11:04 PM
I ordered from obmbicycle.com and I'm worried that they are also the same people as "allbestbicycle" which has reports of being scammed on Facebook.

If others are worried they can simply choose to buy from the Aliexpress store.

I managed to contact one of the guys on Facebook that says it's a scam. Frame was sent but not delivered. It's more a logistic issue. Dpd is a bit weird since it's not shown until Europe.

Those scam reports can also be working for Pinarello and try to scare people away.
September 29, 2021, 11:54:33 PM 		1
Re: obmbicycle.com / Taiwan carbon factory store
Quote from: shenlong1337 on September 30, 2021, 07:57:35 AM
That's a good looking bike. Did you get those 50mm Roval wheels from them as well? What hub are you using? Looks like they are centerlock?

No they come from Sun-bike store on Aliexpress. Very nice and light with 1420 spokes, novatec 411/412 hubs. I didn't choose centerlock since my other bike have 6 bolt. But the disc's wasn't possible to use anyway so I bought XT 160mm disc instead of Ultegra. Just a few grams lighter.
September 30, 2021, 04:21:53 PM 		1
Re: Pinarello (Chinarello) Dogma F12 build 1764km on it so far. I noticed that I forgot to put loctite on the rear hanger, it started to shift weird so that was found at 1000km service.
Some air was trapped inside the front brake hose so I had to bleed it after i let the bicyle lie on the ground.
I think both headset bearing sits a bit too loose so I added one lap of thin 0,1mm tape on them. Now I only need 2nm to set the headset.
GP5000 TL 28mm was replaced with GP 5000 STR 25mm. They feel much better since they are lighter but I did lost comfort on bad tarmac. Usually runs 80/82psi front/rear but I can go down to 72/76 if I want. After that I think it feels loose in the corners.
Added Assioma duo on it since the build too, very nice to measure power.
Ordered Garmin Varia RTL 515 radar too it.
I do have some weird sound on the lowest gears if I put out more than 250w. Carbon like. Some friends says that carbon is never quiet so it might be okay.
Still using 52/36 with 11-30 so the lowest cogs isn´t much used.
It is worth to mention that it is a bit harsh on bumpy roads.
Aero frame comes to use above 30km/h I would say, it´s really going on rails then.
July 21, 2022, 10:44:09 AM 		1