See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Velobuild GF-002 Hello,

I recently bought the same frame but made by Lightcarbon, not sure what is the difference in between them, but mine looks very well done,the only difference is that lightcarbon sells the bike with or without the integrated handlebar and I bought without it but with a very nice stem and spacers that hide the cables.

Unfortunately I still can't finish to build because of I'm not having too much time after my son was born, but I have to let yoy know that I'm struggling a lot with the routing of the outer cables in the area of the headset because of the small gap availale in between my stem and the spacers.

I guess the bike is designed to work with hydraulic brakes and Di2 or AXS groupsets and once I already routed all the outer cables the cables doesn't move completely free.

At the moment I removed some material of the spacers and I will give it a go as soon as I can.

If you want me to show some pictures showing wat I had to do I could attach them here but first I wanted to make sure that the mod works, otherwise I think I will have to change to a standard stem and handlebar.
December 07, 2021, 04:28:02 AM 		2
Re: Velobuild GF-002 Hi All,

I finally finished the build of the my bike.

I'm not totally happy with the feeling of the cable actuated hydraulics brakes because I had to swap the outer cables from the jagwire compression less for a cheap Clarks that were quite more flexible and allow me to fit them through the headset without kinking.

I will give a bit if time testing the bike and if the biting don't improve I will take it to the bike shop to have some advice.

A part from that during the short ride that I did to try all was working fine the bike rides very comfortable.
December 12, 2021, 11:42:18 AM 		1