See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: TAN TAN X67 Frame was sent by Tantan, with a gr201 for a friend, looking forward for it ! I hope I'll receive and assemble it before leaving for holidays in two weeks ☀️
July 12, 2025, 09:29:30 AM 		1
Re: TAN TAN X67 And with a 32mm tire (Michelin Power cup)
July 23, 2025, 03:41:22 PM 		1
Re: TAN TAN X67 I had 3 problems :
- Rear brake mount was not flat, had to face it AND file the connection between the two screw holes (because the facing tool only face on 10mm diameter).

- Seatpost doesn't hold, Tantan says 8-10 Nm but even with 12 Nm, Carbon Paste and alloy foil from can, it slips. I need to find a solution.

-The front derailleur mount is also too much to the exterior, wich leads the derailleur to touch cranks arms. I tried with 105 di2 and ltwoo erX. As well as with ultegra cranks. I had to put a 2mm spacer on the crank axle

Otherwise i only did a 50km ride on the flat, nothing special, i'll see in the mountains.

Edit : the frame with derailleur hanger front and back, rear axle and screws was 853g in size 49, clear coat and black paint
July 26, 2025, 02:25:08 AM 		1
Re: TAN TAN X67
Quote from: Rapac on July 26, 2025, 02:25:08 AM
- Seatpost doesn't hold, Tantan says 8-10 Nm but even with 12 Nm, Carbon Paste and alloy foil from can, it slips. I need to find a solution.


I’ve had great luck putting a piece of clear bra/PPF on the seatpost whenever they keep slipping
July 26, 2025, 03:11:43 AM 		1
Re: TAN TAN X67
Quote from: Trackar on July 26, 2025, 03:11:43 AM
I’ve had great luck putting a piece of clear bra/PPF on the seatpost whenever they keep slipping

Had to pack the bike in a bag yesterday for a trip but I took some clear sticker with me for that. @Zebenz also suggested that. We will see tomorrow, thanks 😁
July 26, 2025, 04:29:12 AM 		1