Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: WXY / XDB shipping after July 1st
  My WXY plane atm... 
July 12, 2021, 05:07:05 AM |
1 |
|
Re: Velobuild VB-R-177
So here it is people.. SRAM Force / Rival mix, weighing in as seen here at 8.2kg... without pedals and garmin accessories its around 7.9 which is still 1kg lighter than my older specialized allez disc from 2020. Might be able to shave off another 100-200g if I hadnt overdone it with the sealant and gotten lighter tires. Possibly could lose some weight by cutting the seat tube to length as well and maybe even cutting the fork a bit more, but so far very happy with it. SRAM is definitely a different experience to my 105, not sure which i like more honestly.
November 25, 2022, 11:51:33 AM |
1 |
Re: What is the general vibe like with ordering from China these days?
Apparently, either everyone is named Chris there or there is one person that never sleeps and responds within a few hours and is pretty nice to work with I've come to the conclusion that Chris is an idea. A mindset. A philosophy... December 19, 2022, 09:59:46 AM |
1 |
Re: What is the general vibe like with ordering from China these days?
I've come to the conclusion that Chris is an idea. A mindset. A philosophy... I think it actually stands for (C)ustomer (H)as the (R)ight to (I)mpressive (S)ervice  December 19, 2022, 12:44:57 PM |
1 |
|
Re: Winspace T1550 new frame?
does anyone know the release date??
January 04, 2023, 04:11:21 AM |
1 |
Re: Carbon Repair - Is my frame fixable?
I had a nice crack in the middle of my top tube, if you want to fix it the "right way" you apply epoxy + a carbon fiber laminate, you can buy DIY repair kits, you get 2 bottles one with the resin and another with the hardener, you need some compression tape to help squeeze excess resin and make it almost a pro job, then after few days of drying just sand the excess resin and ez like new Same here. I successfully repaired the broken seat clamp area on my VB 218 frame (see the VB218 thread). The frame was replaced by VB under warranty. So I thought I'd give it a go. Only thing I would add is that I did actually make sure that the fibres I used for repairing actually had the same tensile strength and e-module (elasticity) than the T700/T800 that the frame is made out of. The shop I ordered this stuff from had many different fibres, weaves and densities on offer. So it took a bit of time to do the research and understand it all. That being said, I would probably never attempt to repair a fork steerer or a handlebar myself. The seat cluster is now holding up fine. I've been riding the frame for around 1000km. No issues. I still haven't painted over the repaired area to be able to inspect it every now and then. January 12, 2023, 06:41:29 AM |
1 |
|
Re: Speeder SC-R52D
After a bit of fiddling with the saddle I also figured out I have to order the Retrofit Kit 7x9.6mm for Seat Posts... Haha For now I have my old saddle with steel rails on. Bike is almost done! January 12, 2023, 04:38:43 PM |
1 |
|
Re: Speeder SC-R52D
BB went in good! 1st try went in straight! I have Shimano BB71 and pushed it in dry. Hopefully will stay creak free Edit: Done! Now just have to wait on good weather for the first test ride (And need to borrow a scale to weigh it...) January 14, 2023, 06:12:48 AM |
1 |
|
Re: Advice on fake frames
Well I was unsure if I should post anything regarding my new racebike project since it is a copy of a well known brand... I was curious enough to place an order and build up the bike after checking the inside of the frame with a camera and all looked good. Seller was the mentioned Rocking cycling store, I ordered the frame on October 19th and it arrived just before Christmas. The paint quality leaves room for improvement but the rest of the frame, seat mast and handlebar look good. Only the break areas and the handlebar spacers needed some manual work with file and sandpaper... Here a picture of the finished bike with 105 Di2, Elite Edge wheels GP5000 28mm: Total weight 7.6kg. First ride was excellent, the bike accelerates fast and holds speed well. Position on the bike is comfortable.  Honestly speaking, if I would have found a similar frame design from a Chinese manufacturer like Seraph or Winspace I would chosen one of their frames instead. But I always liked the design of this particular frame so took the risk to give it a try... if it does not work out it will end up as my indoor bike BR Chris January 15, 2023, 03:01:49 PM |
1 |
|
Re: Advice on fake frames
The S-works SL7 frames are TFSA Jh-33 frames painted.. January 16, 2023, 06:43:02 AM |
1 |