Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: Yishun R086-D Aero Road
32c GP5000 on 23mm internal wheels fit. But only on dry roads I would say.
February 24, 2024, 08:13:45 PM |
1 |
|
Re: Aero rim brake frame with decent tire clearance?
Yes, take a look at the different posts and you should find what you're looking for.
October 13, 2024, 11:42:22 PM |
1 |
Re: new road bike frame
Don't have detailed measurements but I'm looking for something of an all rounder on the slightly more aero side Well in that case, I reckon the following might be of interest. Others will have more ideas I'm sure. Yishun 1058 https://www.yishunbike.com/product/r1058-dperformance-road/ Speeder 55 https://www.speedercycling.com/Carbon-Integrated-Road-Disc-Frameset-SC-R55D-_p429.html Farsports hyper rims. Maybe the 24mm internal/30mm external with dt350 and cx ray spokes. http://oem.farsports.cn/products/hyper-road-rims Speeder bars are nice https://www.speedercycling.com/Carbon-Aero-Road-Flare-10-Handlebar-SC-RH01-_p324.html Conti gp5k s tr tyres in say 30mm perhaps would go nice. Could get multiple stems with your frame order so you can find your fit with little expense. October 23, 2024, 06:44:55 AM |
1 |
|
Re: Speeder Cycling SC-R55D
I finished my build. Quality is amazing, i didnt find any suprises. Three things to look after: - Shimano pressfit BB went almost without resistance - One bolt seat clamp is shit (used on offset seatpost) it slipped after few potholes. - Once i pushed seatpost into frame it was battle to raise the saddle (too tight HT propably) I very like look and overall handling of the bike - i would buy it once again Size is 510. Wheels are 60mm with 24mm internal on DT350 hubs with Sapim CX and brass nipples from Justin. August 25, 2025, 08:01:55 AM |
1 |
Re: Integrated handlebars compliant with new UCI specifications
Hello everybody UCI are going to go back on this for sure. This will affect SOOOOOOOOOOO many of the smaller riders and women. I would not worry about this at all. September 10, 2025, 09:24:59 AM |
1 |
|
Budget Build BXT SL-115
I was interested in the BXT SL 115 but I found almost no user experience and „real world“ photos. So I decided to share my experience. May I introduce myself briefly: I am a Swiss cyclist, 61 years old and I live in a region with lots of hills. So please excuse the mistakes in my English writing. Many years ago, I was a racer, but today I enjoy cycling despite of the fact, that I lose my physical power from year to year. Some of you may know… I had many race bikes and I still prefer the racy style like Giant TCR or Cannondale Supersix Evo. I have two black bikes and I wanted now a colorful frame. But the prices for new bikes are much too expensive. So I set some goals: • 11 speed Di2 (used) • Hydraulic disc brakes • Fully integrated cable routing • < CHF 2'000.- (approx. US$ 2'500.-) • < 7.5 kg After some evenings of surfing in the internet, I ordered at Aliexpress a BXT SL 115, Elitewheels Edge and many other parts. As a group set I bought a used 11-speed Shimano Ultegra Di2. I don’t like cassettes beginning with 11-teeth cogs. I go for Shimano 14-28 teeth and I bought on ebay chainrings from Bikingreen 30/46. I expect no problems in the Swiss Alps. After 4 weeks the frame arrived. Pros: • Good packaging • Complete bike with headset, bottom bracket, handlebar, seatpost, etc. • Nice paint job; but you can feel the edge between black and red • Visually good quality Cons: • The rubber plugs for the DI2-cables for front and rear derailleur are missing • The BXT-logos are not under clear coat. I suppose they are water transfer film and this will not last long • The adapters for the break calipers were not included • The color of the frame is glossy, but the seatpost is matte • The headset cap is too thick. You have to cut the shaft of the fork too short, if you want to use the delivered cap. • The rubber cover for the seat post clamp doesn’t look good. The painting in this area is not neat. The installation of the bike was without any problem; even the fully integrated cable routing in the handlebar went straight forward. I almost finished the build. I will show photos of the bike and a detailled list of all parts (price and weight). September 29, 2025, 02:49:14 PM |
1 |
