Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: Velobuild VB-R-168 Frame
Hey guys, I finished my build last week. Wanted to share my experience with you and say thanks for all the insights! I went with a 168 frameset, custom painted in size 54. The ordering process was fine, Chris was responsive and answered all/most of my questions. Settling on the color for the paintjob was not straightforward however, as I wanted a special color for which I had a pantone code (metallic color as per pantone code). He always said that they can do the color, but “not metallic” which was quite confusing since the color code was referring to a metallic color. So after a bit of back and forth, we decided to try a candy-blue paintjob (transparent blue over metallic silver base). After a week, he sent pictures of the painted frame and said that they will paint another one as it wasn’t metallic enough (without even asking me if I was happy with the paintjob). So another week later, I had two “versions” of the paintjob to choose from, and I chose the second one. The paintjob turned out way better than expected, they did a really good job! I received the frame via DHL to my door (Germany), with XDB shipping and no additional duties within 10 days after it got shipped. Frame quality was good. The inside of the fork had a few loose glassfiber-bits inside, maybe the reaming wasn’t perfectly done. I removed most of them, but the steerer tube was a bit to tight for the Deda 70 compression plug, so I sanded down the lower part of the compression plug a tiny bit. As for the compression ring, I went with the SL8 one that I got from Specialized for 5€. As the SL8 uses a Headset Bearing with an ID that is 0.5mm larger than the VB, I had to modify the compression ring by sanding (no issue since its made from plastic). To ensure enough clearance between the frame and the lowest headset spacer, I had to use 5 FSA microspacers that I cut to allow for internal cable routing. I also bent the lowest microspacer to prevent the sharp edges of the cut spacers from damaging the brake hoses. (as seen in the pictures) Headset is free of any play. I used the separate bar/stem combo, but 3D-printed a topcap that allows to run spacers above the stem to validate the position before cutting the steerer (too) short. Routing the brake hoses (no shifter cables, as I run semi-wireless Di2) trough the bars was tough and required some sanding to remove the sharp edges on the exit holes in the handlebar. (I have tons of respect to you guys who manage to route 4 cables trough those handlebars, lol. Seems impossible from my perspective) Building the bike was straightforward. BB was properly sized (a tiny bit undersized, but the Token Ninja BB pressed/threaded in fine). As for the seatpost, I originally planned to replace the aluminium hardware with carbon parts from an old Elita One seatpost. However, they did not fit (and were only marginally lighter anyways). Has anyone found good replacement hardware to shave a few grams of that seatpost? However, I had no issue with a slipping seatpost (used carbon paste) so far. Regarding the weights: • Frame (without any hardware, Size 54, painted in “candy blue”): 1025g (photo shows frame with hardware and axle) • FD Hanger with screws: 15g • RD Hanger with screws: 17g • Uncut Fork incl. separate crown race: 428g (cut to about 402g, with a few cm left to be cut) • Stem 100mm (without Topcap): 193g • Handlebar 400mm: 270 g (quite a bit heavier than expected) • Headset spacers (all, without c-ring):77g • SL8 C-Ring: 5g • Seatpost: 240g • Seatpost grommet: 2,4g • Seatpost wedge: 24g • Front Axle: 37g • Rear Axle: 45g • Headset bearings: 62g The whole build with complete Ultegra Di2 R8100 came out at 7,78 kg without pedals or 8,19kg with Pedals, Bottle cages, computer mount. Once I dialed in my fit (coming from an endurance frame that was already slammed, I will slowly lower my position), I will probably shave a few hundred gramms by switching to a lighter cockpit, saddle… Also thinking about a lighter wheelset (currently at 1635g for the pair). Complete price was also quite competitive I guess, as I paid less than 2800 euros for the whole setup with frameset, groupset, wheels, tires, small bits etc (without pedals & cages), including shipping and taxes. (all bought new, so no second hand prices). Bike rides really well without any issues, but I have to get some more kilometers in! Definitely happy with my build so far! September 15, 2023, 08:02:09 AM |
1 |
Re: Velobuild VB-R-168 Frame
Hey guys, after I have read through the whole thread, I would like to thank you for sharing your knowledge and experience! TFSA and Delihea have a SL7 clone. But I don't think 32mm will fit... I have the SL6 clone and the front is OK for a 32mm (even 33.5mm real size) but the back is not... September 18, 2023, 07:37:33 AM |
1 |
|
Re: Velobuild VB-R-168 Frame
Re zero offset post: I once got them to confirm that if we are 50 buyers, they’d make it. So far I guess we’re below that number or am I wrong?
September 18, 2023, 03:34:10 PM |
1 |
|
Re: Velobuild VB-R-168 Frame
I'm in for zero offset post.
September 18, 2023, 05:18:11 PM |
1 |
|
Re: Recommendations? Wide and deep wheelset
How cheap do you want to go? Farsports have their Wave series wheel in 32 OW/26IW
October 13, 2023, 06:14:49 AM |
1 |
|
Re: Recommendations? Wide and deep wheelset
It would be nice if You would just read few newest threads before starting a new one. We are discussing wheels in few other threads. If You want a deep and wide rim You can use this contact. They have nice catalogue of rims and hubs. I've myslef ordered 35 deep and 25iw deep rim wheels with rd13 36t ratchet hubs, same hubs as Elite wheels, because yuanan is a manufacturer foe Elite. https://www.yuananbike.com/ manager Leon directly on WhatsApp +86 157 3827 4372 or emial sales@yuananbike.com The guy is very responsive and can help you build a custom wheel or choose something from their offering. You can tell him Jakub send You and he will give you a discount. October 13, 2023, 06:26:28 AM |
1 |
Re: Lightcarbon: New LCR017-D (or Yishun R1058-D)
I don't think it is exactly the same frame. Geometry is different and details are similar, but not the same. This is the frame https://www.lightcarbon.com/new-integrated-road-disc-brake-frame_p136.html October 23, 2023, 02:44:08 AM |
1 |
|
Re: TanTan TT-X38 Build
Nice looking bike, but you forgot one important thing! You didn’t make your bed this morning!
October 27, 2023, 12:55:36 PM |
1 |
|
Re: Recomendations 27.2mm carbon seatpost
Elita One are basically the undisputed kings for a lightweight, good value post. I think most people on here have used them. I've had a few and they've all been great considering you can pay A LOT more for other big name branded ones for a similar weight. November 01, 2023, 04:29:18 AM |
1 |
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
They have hollowed out version of each too. These solid discs are "aero" apparently.Except in side and cross winds. 
November 08, 2023, 11:45:26 AM |
1 |