Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: LTWOO ER9 & ERX - Electronic groepsets
Would anyone be interested in buying my full ERX setup? Ridden less than 1km, rear mech failed and I have a brand new unused replacement. I swapped it out for Di2 before the replacement part came in so it’s all practically brand new sat doing nothing.
October 29, 2023, 12:42:56 PM |
1 |
Re: LTWOO ER9 & ERX - Electronic groepsets
Have you paired it successfully? I have my ER9 on order and plan to use it with my karoo2 I paired it successfully with my Wahoo Roam v.1 Sometimes it's a bit slow to display the gear changes but other than that it's fine. Pairing worked instantly. December 21, 2023, 02:59:06 AM |
1 |
Re: LTWOO ER9 & ERX - Electronic groepsets
This was my (positive) experience with the same store Also had good customer service experience with 80 designer store sorting a broken GR9 shifter. September 02, 2024, 12:46:12 PM |
1 |
|
Re: Rockbros carbon cranks feedback?
Just got my set, will report on them once on the bike. Finish is nice on them and don’t expect to have any issues. I might just sand them and then clear coat as I don’t love the logos. 315g for a 162.5 set September 05, 2024, 12:47:46 AM |
1 |
|
Re: Thinkrider X2
i have 2 smart trainers, and a power meter on my bike. Inconsistencies between meters, and unreliable data, are extremely frustrating. Very quickly, it's worse than not having power data in the 1st place. Also, and rather shockingly, the Pogi interview on Attia's podcast has Pogi say he basically trains with HR because the shimano power meter is so useless that it can't be relied upon. That's insane when you think about it, given that the likes of Favero have been flawless for years. Anyway. My point: unless there's a major price arbitrage, i'd stick with options that are tested, with warranty and support. Saving 100 eur (random number) on something like that can end up creating so much frustration that i'd be careful. September 28, 2024, 07:45:23 AM |
1 |
|
Re: Thinkrider X2
In Germany a used Flux S usually comes in cheaper. U can get spare parts online. GP Lama tested them okay I believe, but I would follow Serge's advise. September 29, 2024, 06:18:05 AM |
1 |
Re: LTWOO ER9 & ERX - Electronic groepsets
Got the Zrace calipers in and put them on. I think this is like a 3rd gen? Unlike Tracevelo who has two separate ports where the hose goes into and Fiveminutevelo where the there is one main port and one half port for the second piston... Mine only has one port so they've machined it differently and now the fluid gets distributed to both pistons after the ONE port from the hose. Pistons are still the same black alloy ones. I haven't had a chance to bed in the pads and ride them yet so we'll see but initial impressions is that they are feel better than the stock Ltwoo calipers with the lever feel. Overall looks to be pretty well made and really looking forward to giving this a go! FYI - Looks like you're running 140mm disc in the rear? If you are, be careful with tightening the caliper bolts. The alloy screw holes is very soft on the ZRace XG calipers and can possibly strip. October 01, 2024, 11:49:13 AM |
1 |
Re: LTWOO ER9 & ERX - Electronic groepsets
Could it be the shifter button getting stuck? Like I had an issue where the spring wasn't strong enough to push the buttons back out. It was like two Phillips screws, take the buttons out, stretch out the springs and put them back together and my problems were solved Nope, shift buttons click just fine. It's definitely the RD that's not responding. I'm just going to wait for the 80 Design Store to respond and hopefully get a replacement. October 01, 2024, 11:50:51 AM |
1 |
|
Re: Thinkrider X2
$235 shipped to my door is a pretty tempting deal.
October 02, 2024, 07:47:31 AM |
1 |
|
Re: Thinkrider X2
Well I caved in and pulled the trigger. I usually won’t buy something that doesn’t have at least a few reviews, but I guess I’m the guinea pig for this one. Came out to $238.63 after coupons and taxes.
October 05, 2024, 12:15:17 PM |
1 |