See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: VeloBuild VB-R-268 frame
Quote from: patliean1 on March 13, 2024, 09:57:37 PM
Wicked @rga19071976 !

Assuming your paint color is silver chameleon, my frameset was shipped out yesterday in the same color. Hoping it delivers by end of March. I'm gonna be blinding mofos when the sun hits  8)
Right, that's the color. It's a blinding machine  :D
March 14, 2024, 10:09:57 PM 		1
Re: VeloBuild VB-R-268 frame
Quote from: taurusstier on April 21, 2024, 05:59:20 AM
Hi,
I have a question before I shorten the fork. Do I have to leave the fork 5.5mm shorter than the top of the stem to be able to adjust the headset? That seems to be a lot. Am I making a mistake?

That metal lip of the plug is going to sit at the top of the steerer column. You have to cut that steerer so that there's space to compress the whole system. A few mm more won't make a difference, but measure twice cut once, ofc, you do want the stem to clamp on the steerer and not half void...
If that's unclear (it used to be unclear to me), there are YouTube videos that explain everything.
April 21, 2024, 10:55:00 AM 		1
Re: Magene P505 PES Base Spider Powermeter
Quote from: johnnyboy4711 on December 05, 2024, 04:32:54 PM
reached out to Panda podium and they sent the updated pre load screw free of charge.
sound bunch of lads tbh!

Also got mine free of charge from geosid store on AliExpress. They just asked me to make a 1$ buy on their store so the shipping will be covered
December 11, 2024, 05:59:39 PM 		1
Re: Spcycle New Mold SP-R088 Carbon Road Frame
Quote from: Benbenben on March 20, 2025, 06:02:46 AM
I am pretty sure that the headset cover that comes with the handlebar needs to be round. It's also the part that attaches to the stem spacers

The elita one sl8 on Ali seems to be coming with 2 different covers. I am waiting for better pictures from the seller.

Yes, the base of the headset cover must be round, but the spacers can also be shaped, and (if it matches well) you can fit any handlebar.
March 20, 2025, 11:52:30 AM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: fhill on March 24, 2025, 03:55:04 PM
Anyone else having problems with the battery holder?

It prevents the seat post from going in all the way and it gets stuck when taking out the seat post which says to me that the clamping from the holder to the seat post is absolutely shit.

You can have a look at this type B battery holder :
https://a.aliexpress.com/_EIdKITI

It is expensive for what it is but it works perfectly on a SL8 seatpost. However, I am not sure how it will fit for the x68 seatpost.
March 24, 2025, 05:57:15 PM 		1
Re: Spcycle New Mold SP-R088 Carbon Road Frame
Quote from: j0lsrud on May 15, 2025, 05:50:08 PM
Today I finally received the frame. Almost two months. The point job was really good.

The seller did not include spacers for the headset and rubber gaskets for the holes for the  wire housings. Is this correct?

And does anyone know the torque spec for the udh?

Congrats! Did you get the frameset only? If yes, no rubber gaskets were provided and no spacers for headset. More importantly, did you get a flat or concave rear thru axle hole on the non-drive side? That will determine if you need multiple thru axle washers or not.
May 15, 2025, 06:20:35 PM 		1
Re: TAN TAN X67
Quote from: Rapac on July 26, 2025, 02:25:08 AM
- Seatpost doesn't hold, Tantan says 8-10 Nm but even with 12 Nm, Carbon Paste and alloy foil from can, it slips. I need to find a solution.


I’ve had great luck putting a piece of clear bra/PPF on the seatpost whenever they keep slipping
July 26, 2025, 03:11:43 AM 		1