See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Airwolf: What is this model inspired from? [Trek Madone] took me a while to get through all the hassles building this bike but here it is ready to ride now:

- issue with upper headset play solved by mounting an additional c-ring as a spacer above the compression ring
- lower headset bearing needed some alu tape wrapped around the inside (fork diameter was too small for lower headset bearing, but the bearing has the dimensions as the "original")
- front brake caliper needed to be filed as the upper bore hole in the fork was about 2mm off
- the delivered seatpost mount cracked at about 3-4NM torque while mounting the saddle tilt screw (see photo). As i think this is a general construction issue and i don't trust the replica here, i bought a slightly used original one
- no feedback coming back from airwolf, only that they will check with their quality control...

Overall the bike fits and rides quite good. Coming from an aero bike of the first generations i subjectively would say that this one feels a bit stiffer and more aerodynamic. However i guess that a big factor for this is coming from the wheels.
April 06, 2024, 02:00:42 PM 		1