Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - JimLee

Pages: 1 ... 5 6 [7]
91
29er / Re: LightCarbon 918?
« on: August 21, 2022, 04:17:13 AM »
Now only two size, M and L, if some wholesaler request size XL, we will make the model for it,  normally a new model we only open one or two sizes, M or L, the rest accoriding the sales status.

92
26er & 27.5 (650b) / Re: What are Enduro, Super-Enduro & DH options?
« on: August 18, 2022, 02:36:45 AM »
From the point of view of our factory, enduro is enduro, DH is DH, when we manufacture them, we follow different material strength requirements and ratios according to different uses.
In terms of material strength, DH frames are much stronger than enduro frames and trail MTB, so the cost also more higher, a trail MTB carbon frame in our fatory cost is under USD$ 600, cost of enduro under USD$700， but a DH frame is near to USD$1000. check out the photos as below,

93
29er / Re: LCFS947 - 160mm 4-bar 27+/29
« on: August 18, 2022, 02:25:23 AM »
the installationlist from my another customer:
Frame:
Lightcarbon LCFS947 -Large-
Build
Fork: Rockshox Lyric Select 170mm 42mm with 2 tokens
Rear Shock: Rockshox Deluxe Ultimate 185x55 159mm travel with factory tokens. Found 190€ new on bike24 so no piggyback..
Drivetrain: Shimano XT8100 shifter / SLX7100 Rear derailleur / SLX7100 crankset 32T 170mm/ SLX 6100 Chain & cassette
Brakes: Shimano deore 6120 with metallic pads
Rotors: Slx RT66 203mm F - 180mm R
Handlebar: Nukeproof horizon v2 - 35mm- 25mm rise- 770mm
Stem: Nukeproof horizon 35mm
Wheelset: Nukeproof Horizon v2 102T
Headset and seatpost clamp: Nukeproof
Dropper post: Brand-X 170mm 31.6 going to swap with a friend's 150mm. This frame works allright with Oneup v2 150mm only!
Saddle: WTB volt
Tires: Maxxis Aggressor / Dissector / Assegai on rotation 2.5/2.6
link in chinertown:https://chinertown.com/index.php/topic,3719.0.html?spm=a2700.aliseller.0.0.51254125NUI7yg
Jim(at)lightcarbon.com

94
29er / Re: LightCarbon 918?
« on: August 18, 2022, 02:20:20 AM »
about rear shock, we design the frame according Monarch RL Rear Shock 165x38mm, because it's easy to get in the market.
The rear shock size is 165x38mm(standard mount only).piggy back design and coil design also be ok.
check photos as below:
Full Internal Cable Routing Design and Linkage-driven Single Pivot Suspension System .
also the frame have the knock block system as trek.
now this model have some in stock for individual buyer.
contact me:
Jim(at)lightcarbon.com

95
E-Bike Frames & Builds / Re: 29er Ebike frame
« on: June 29, 2022, 03:17:48 AM »
The biggest advantage of the M510 is its ultra-lightness and maximum instantaneous power output, which is sufficient if the driving conditions are not very aggressive.
In addition, M510 can be used with BT F25 battery 820wh, preferably both voltages are 48V, but according to Bafang engineer, 52V 17.5ah battery can also be used with M510 48V. ，But so far, our customers have not done this combination, they all use the same voltage 48V motor and battery.
Jim Lee-Lightcarbon

96
29er / Re: Light Carbon LCFS947 build
« on: June 08, 2022, 10:38:40 PM »
Looking forward to your feedback after your first riding,

97
29er / Re: LCFS947 Build (Risky Business)
« on: May 31, 2022, 04:11:36 AM »
you means is there any abnormal sound inside the seat tube when riding?
Jim Lee- Lightcarbon

98
29er / Re: LCFS 958 build help
« on: May 31, 2022, 04:02:16 AM »
Can you post your parts list? Many customers asked me which parts they can use. I want to look for a few cases.
Jim Lee-Lightcarbon!

99
29er / Re: LCFS947 - 160mm 4-bar 27+/29
« on: May 30, 2022, 03:20:01 AM »
Quote from: Remedy 7 on March 14, 2022, 08:41:20 AM
Yup looks good.
Hi Benny, what's about your frame now?Has the assembly been completed?
post some photos pls.

100
29er / Re: LCFS947 Build (Risky Business)
« on: April 29, 2022, 04:55:26 AM »
this frame can use the coil shock,  if you find the right size,
the recommend Rear Shocks (185*55mm trunnion mount) and Bushing Kits(30*10mm) is only recommend,
Make sure that the diameter of the bottom and middle ends of the coil shock absorber is less than the inner width of the seat tube.

101
29er / Re: LCFS 958 update. Problems
« on: April 29, 2022, 04:40:46 AM »
sorry for our mistake, now what's about your frame?
Jim Lee from Lightcarbon,

102
E-Bike Frames & Builds / Re: Light Carbon LCES004 E Bike Build
« on: April 29, 2022, 01:46:51 AM »
Bafang M510 motor as same as M500, It's an advanced version of M500 motor,
so our LCES004 can fit for M510. also ,now our lightcarbon can introduce you the seller of Bafang motor and battery, no MOQ request,
Previously, we cooperated directly with Bafang, but their MOQ requirements were too high. We can only let customers buy motors and batteries by themselves.
But now, we have found a good supplier who helps us provide motors and batteries for individual buyers. I am also discussing with him to provide batteries with greater capacity.

It should be noted that the motor and battery are transported directly by him. We do not have a special transportation mode for transporting the battery.
Jim Lee from Lightcarbon

Pages: 1 ... 5 6 [7]