Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - BbCurly

#1
Serviceability is high up there for me. I've had 2 sets of Mavic wheels from the rim brake days destined for landfill due to their proprietary spokes and nipples and not being able to replace them. Mavic were shocking with their parts.. At least here in Australia late 2010's..

I just ordered my first set of Road Disc-brake wheels. I went with XMCS and chose Sapim steel spokes and access holes on the rims to assist in the serviceability..

#2
Quote from: delarune on November 05, 2026, 12:06:15 AMYes XMCS iw26 and conti gp30 I think is a perfect match. Wam 32,5 makes the rim tiny exposed but nothing to worry about. Gp32 at wam 34 works as well but not as nice as the 30 😃
\


thank you
#3
Hey all, just looking to hear from anyone running 26mm IW XMCS wheels on a road bike set up with 30mm wheels.

I'm about to purchase a set with the plan to run 30mm GP5000s w/ TPU's, possibly 32mm on the rear

Conti says it's outside the ETRTO but they are quite conservative.

Otherwise I'll stick to their 24mm IW. Just trying to future proof a little.

Bonus question, if you are running this combo, are the rims exposed at all? The roads I rode on a shit and would love to avoid pothole strikes where possible
#4
Ha yeah mate you're totally right.

I'm chatting with XMCS via email now about a set of new wheels

#5
Quote from: Pedaldancer on October 25, 2026, 01:57:40 PMI am pretty convinced with 74kg you are not on the limit where the wheels must be perfectly even tensioned. Unless you are super strong and know that you have the tendency to kill your equipment (i have a friend who does it. But he's pretty much aware of it )

Choose what you want. Both will do the job.

You can also look at other well known companies for similar wheels.. budget is a valid and important requirement. Totally agreed.

Much appreciated!

Yeah i'm definitely not pushing big watts
#6
Ilja this site is fantastic. Thank you!
#7
Sander2177, Pedaldancer I really appreciate it.

I'm wanting my wheels to hopefully last me the next 6-8 years or so. A few years back i wouldn't fret it as much. Now i have a little baby boy and less cash to easily throw around on bikes i can't buy multiple wheel sets anymore :)

My last set of wheels were Fulcrum Race zeros (rim brake) and descended incredibly well and were asymmetric. They were nice and stiff too when putting power through them. Lovely wheels.. I'm on 73kgs and more of a climber..

At the moment my choice is between a set of Caden 50mm - asymmetric and 2:1 or XMCS - 50mm 24mm IW R280 Hubs w/steel bearings - a must. Symmetric..

The Caden's are twice the price but you get A LOT of the money. Yet the XMCS look really good for half the price too..
#8
Quote from: Pedaldancer on October 23, 2026, 07:51:49 AMIn the most cases asymmetric rims reduce the asymmetrical tensions on left and ride side. usually the asymmetry does not even out the tension differences completely, just shifts it a little bit.

There are rare combinations which really need a symmetrical rim (2:1 or if the hub was designed specifically to match symmetrical rims), but for the most systems it gives a much better tension on the low tension side.

Why a lot of symmetrical designs are still produced? Well. "Never change a running system"  It works in many wheels although it's not the best design.


Is it something you take into consideration before purchasing a set of road wheels?
#9
I'm buying my first disc brake roadie after 20 years of riding rim brakes(!)..

I remember a few years back hearing about the benefits of asymmetric wheel design particularly for disc brake wheels due to the brake side taking on more tension/forces(?)

Caden makes theirs asymmetric for this reason, Reserve as well i believe. But i'm learning that that isn't the case for all manufacturers.

I'd love to hear from those more experienced on this subject and how important, or not, asymetric wheels are, considering some Chinese wheel sellers offer them and some dont.

Cheers
#10
Quote from: bryanbanducci on October 21, 2026, 04:32:38 PMim debating between a set of zen wheels https://zencarbonbike.com/product/vaporlite-%e2%85%b1-50-cs/ and a set of xmcs wheels https://www.xmcarbonspeed.cc/products/xmcs-26mm-iw-58mm-depth-ul-new-layup-700c-road-gravel-bike-wheelsets-with-new-hs606-ultralite-20-20h-straight-through-version-hubs. I currently have rene herse 31mm tires measuring 34mm WAM on zipp 303 firecrest wheels which are 25mm hookless. I am in the process of building up a v1 enve melee and will eventually probably run 32mm or larger tires. what would people recommend? leaning towards the slightly wider XMCS set

Bryan i'm in the same position (but the steel spoke versions) but building up a Tavelo Arden - my first disc roadie. I can't decide between the two brands. Both seem to get great reviews. XMCS being the more well known of the two but totally open to Zen as well
#11
I live and ride by the ocean so just about every set of wheels i've had alloy nipples corrode and crack so whilst the option for brass is there i thought i might give it a try?
#12
Nice one! I can't wait to see them on the SL9 and hear how they go.

I've got a Tavelo Arden in that wild marbled blue on the way - my first disc brake roadie! Yeah i'm wanting to go pretty safe 50mm, sapin spokes, exposed (brass?) nipples so the VaporLite II 50's seem just right. Possibly silver hubs and spokes.

Can't wait.
#13
Quote from: Sander2177 on October 05, 2026, 03:39:03 AMhave a set of these, although I haven't ridden them yet as my new SL9 build is taking so long to come together with the new paint and waiting for a few parts.

Personally, I think these rims are best suited to 30–32 mm tyres. I have a 30 mm tyre fitted on the front and it measures just over 32 mm on the rim. I don't have a photo of the rear measurement, but from memory the 32 mm tyre also measured a little over its stated size.

You have to remember that the actual tyre width once fitted can be quite different from the labelled size, particularly on a wide internal rim. So despite the 36 mm maximum external width of the rim, I personally wouldn't be looking to run 34 or 35 mm tyres on these wheels. 30–32 mm would be my choice.

Hey Sander,

I noticed you have silver hubs and not the black ones advertised on their site (assuming these are the VaporLite II 50's?). Is this something you requested? If so was there any other changes you requested?

By any chance have you had a chance to ride them yet?

Cheers
#14
I ordered an Arden from a local retailer here in Sydney a fortnight ago. I reached out to Tavelo via email to ask them about stem options and got no response. Even after a follow up email.

I'm really looking forward to receiving the frame but i'm also left a little sour that they're slack on communication. Particularly with just how fast and receptive so many of the other Chinese brands are.

-----

This will be my first disc brake roadie. I've been on the rim brake nothing integrated train since forever. Does anyone know if i need anything additional to run a traditional bar and stem combo? I've got my fit dialled in but i want to be doubly sure before i go buy an integrated bar and stem. Cheers