1
Cyclocross Frames, Wheels & Components / Re: Spcycle New Mold G056 Carbon Gravel Frame
« on: August 16, 2025, 12:48:10 PM »I went for black titanium
Do you have a link for them?
Chinese Carbon MTB Forums
News:
Happy Holidays!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
Do you have a link for them?
2
Cyclocross Frames, Wheels & Components / Re: Spcycle New Mold G056 Carbon Gravel Frame
« on: July 04, 2025, 01:22:10 PM »What I meant is that it seems like the derailleur is not aligned to the chainrings
Mine has a bolt that pushes against the vertical tube (onto the plate to which you hang the derailleur) that, iirc, adjusts the derailleur alignment
But I only installed 1 derailleur in all my life, maybe someone with a bit more experience can be more helpful
Thank you. That was the solution. The hanger that connects the frame with the derailleur was installed crooked.
3
Cyclocross Frames, Wheels & Components / Re: Spcycle New Mold G056 Carbon Gravel Frame
« on: July 02, 2025, 03:01:07 PM »Looks like it's too further, is it maybe tilted with the back towards the outside?
I followed the instructions for my 105 (downloaded the manual from Shimano website) and had no particular problem with the FD
What exactly do you mean by "tilted with the back towards the outside"? The FD can swivel and has hight adjustment but I can't tilt it.
4
Cyclocross Frames, Wheels & Components / Re: Spcycle New Mold G056 Carbon Gravel Frame
« on: July 02, 2025, 10:36:32 AM »Brute force
Of course without the cables in.
With one hand I kept the housings folded down as much as I could, then I installed the stem and pushed it down as low as it would go. Once I could get it close enough it used the small screw below the last spacer to bring the stem further down, and then I tightened the top cap screw to bring it all the way down.
Once the housings take the initial bend it gets easier, then it's a matter of pushing through expecially the brake cables. For the front brake I had to open the way from the caliper end with a shifter cable first, only then I was able to push the brake cable through the bend at the stem.
Be aware that by mistake I folded the small lip inside the last spacer, the one that divides the housings between left and right side. Avoid that as there's not enough height to have it below a cable, I had to remove the stem to lift it and then install it again.
Thank you! I managed to get the headset on. I am making good progress but I am now kinda stuck on the shifting.
The rear derailleur is installed and properly aligned but the front derailleur is a pain to align. I am using a LTWOO RX groupset with a 50-34T crank. When I align the sticker with the large disk the derailleurs front is rubbing against the large disk. I attached photos of that issue.
Do you know how I can resolve that?
5
Cyclocross Frames, Wheels & Components / Re: Spcycle New Mold G056 Carbon Gravel Frame
« on: June 20, 2025, 11:04:08 AM »Here it is! My first bike build ever
Ceccotti RF 25 in size L, chameleon glossy paint, 7.85 kg (without pedals) x 1380 €
I've been sourcing parts from months, waiting for offers and price drops, as well as doing a lot of reading and studying, and I'm now really satisfied with how it turned out, and how much I learnt in the process.
I wasn't fast as I never did anything similar, but I had no major problems, just a few things that demanded their fair amount of time: above all sanding down the compression ring (it left a thick gap above the frame) and cleaning the bottom bracket threads from paint overspray.
Parts breakdown:
Frame + fork + bottom bracket Ceccotti RF25 size L 396,48 € https://it.aliexpress.com/item/1005008208274231.html
Seatpost Toseek 15,19 € https://it.aliexpress.com/item/1005005286211545.html
Saddle Ryet Aircode 42,58 € https://it.aliexpress.com/item/1005005209973776.html
Stem Kocevlo 80 mm 17,41 € https://it.aliexpress.com/item/1005007557399904.html
Handlebar Og-Evkin HB-010 400 mm 26,09 € https://it.aliexpress.com/item/1005005944474195.html
Bartape Og-Evkin BT-001-BLACK 4,81 € https://it.aliexpress.com/item/1005005644811837.html
Shifters + derailleurs Shimano 105 R7000 11 114,90 € https://it.aliexpress.com/item/1005007002474089.html
Crankset + chainrings Riro XX11 RD 50-34 113,66 € https://it.aliexpress.com/item/1005006481196419.html
Pedals (planned) Zeray ZP-108S 21,45 € https://it.aliexpress.com/item/1005006295887679.html
Cassette Goldix SL CNC 11-32 63,70 € https://it.aliexpress.com/item/1005006472254930.html
Chain Decathlon (KMC) X11 19,99 € https://www.decathlon.it/p/catena-bici-11-velocita/_/R-p-300692
Brakes Onirii BR-05 41,31 € https://it.aliexpress.com/item/1005006979553014.html
Brake pads Kingstop 4,89 € https://it.aliexpress.com/item/1963687894.html
Rotors SRAM (maybe) bronze 160 mm 16,00 € https://it.aliexpress.com/item/1005005051281201.html
Shift cables (inner+outer) Jagwire PCK500 25,04 € https://www.amazon.it/dp/B077F9ZMKF
Brake cables (inner+outer) Jagwire PCK200 22,99 € https://www.amazon.it/gp/product/B01MZ5WP6E/
Antirattle foam generic 3,48 € https://it.aliexpress.com/item/1005007235167191.html
Bottle cages Riderace 2,29 € https://it.aliexpress.com/item/1005004883648081.html
Wheels Elitewheels ENT 38 mm 366,87 € https://elitewheels.aliexpress.com/store/1859081
Tubes Thinkrider TPU 10,59 € https://it.aliexpress.com/item/1005005361851622.html
Tires Continental Ultrasport III 28 mm 50,56 € https://www.amazon.it/gp/product/B0BBZ93F8V/
I am trying to install the same stem but the brake cables and the shifting cable housings are so stiff that I can't get the stem over. How did you do that?
Pages: [1]