1
Road Bike Frames, Wheels & Components / Re: [GIVEAWAY] Participate for Free! 3 Lucky Cyclists to Win XOSS G3 GPS Bike Compu
« on: March 11, 2026, 11:29:42 PM »
Good luck all 
Chinese Carbon MTB Forums
News:
Happy Holidays!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Road Bike Frames, Wheels & Components / Re: Lightcarbon: LCR018-D (endurance all-road)
« on: March 11, 2026, 06:36:56 AM »
You need something similar to the parktool BB 27.3. It's a smaller OD than SRAM Dub BBs so BBt 47-16 won't work (doesn't engage the teeth fully).
3
Road Bike Frames, Wheels & Components / Re: Xiamen Carbon Speed 2025 new carbon crankset
« on: January 23, 2026, 02:03:34 AM »
Purchased 165mm Ti spindle cranks in October. Super sleek look and they're exactly what you'd expect from a crank. There's nothing flashy besides it being lightweight, if you like the look you really can't go wrong.
Just install the crank correctly and check if you need a spacer to ensure the easton cinch doesn't rub against the BB. I compressed my BB bearings because I just assumed assembly. Got it wrong and caused a few issues.
One BB later and all is good.
You should probably ask and purchase an extra pre-load ring if possible, you never know when that thing will break (if it does). Harder to find aftermarket 24mm spindle ones.
Just install the crank correctly and check if you need a spacer to ensure the easton cinch doesn't rub against the BB. I compressed my BB bearings because I just assumed assembly. Got it wrong and caused a few issues.
One BB later and all is good.
You should probably ask and purchase an extra pre-load ring if possible, you never know when that thing will break (if it does). Harder to find aftermarket 24mm spindle ones.
4
Road Bike Frames, Wheels & Components / Re: LTWOO ER9 & ERX - Electronic groepsets
« on: September 14, 2025, 11:37:17 PM »
Anyone on erx v3 having battery drain issues. Symptoms go away when the front derailleur is unplugged. Drain is maybe 10-30% per night.
Just doesn't go into sleep mode when FD is plugged in, the RD green LED will blink every 10-20 seconds.
I've tried 2 sets of batteries, also tried swapping which h cable goes to where. Even bought a spare to see if it followed a specific cable, no dice.
Just doesn't go into sleep mode when FD is plugged in, the RD green LED will blink every 10-20 seconds.
I've tried 2 sets of batteries, also tried swapping which h cable goes to where. Even bought a spare to see if it followed a specific cable, no dice.
Pages: [1]