Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Theolean

Pages: [1] 2
1
Cyclocross Frames, Wheels & Components / Re: Velobuild AERO GRAV Frame
« on: August 29, 2026, 09:14:35 AM »
Do you mind to explain why? Up to now I have not used any integrated handlebar, so I have no experience.

Are 2-Bolt mounts in general crap or just this specific one?

2
Cyclocross Frames, Wheels & Components / Re: Velobuild AERO GRAV Frame
« on: August 29, 2026, 03:42:39 AM »
What kind of computer mount fits to the integrated handle bar? Is it a 2- or 3-bolt mount?

3
Road Bike Frames, Wheels & Components / Re: New VeloBuild gravel race frame in the works...
« on: August 14, 2026, 12:24:45 PM »
I want to build a new commuter bike and this frame is actually quite nice.

One of the requirements would be the ability to install fender and a rack. From the pictures that I see, the rack should be possible.

Ideally I want to install normal fender (for example https://www.sks-germany.com/Produkte/Schutzbleche/BLUEMELS-STYLE-27-5-29-SET.htm?a=article&ProdNr=111&p=1003). So a screw at the bottom bracket and one at the seat stays is required.

The pictures I could find, are not 100% clear. So can someone verify if this would be possible?

4
Cyclocross Frames, Wheels & Components / Budget commuter bike - 40 mm tire clearance with fender
« on: August 07, 2026, 01:40:52 PM »
Hello

I'm looking for budget-friendly commuter bike with about 40 mm tire clearance with installed fender. It should also be possible to install a normal bike rack for bags.

I have seen Mondince FM326 or FM356. Lightcarbon has the 071 (087 is too small). Are there other options? Maybe even solutions that are a bit more budget friendly?

5
Component Deals & Selection / Re: Chinese cycling clothes
« on: July 10, 2026, 11:15:08 AM »
Thx a lot for the suggestions. I have ordered one from YKYW and will report how the fit is.

@crazyravr: I also had the same idea, will do it most likely on the one I already have.

6
Road Bike Frames, Wheels & Components / Re: Zen Carbon Wheels Xiamen
« on: July 09, 2026, 07:08:25 AM »
The white one is an eye-catcher  8)

BTW: do you have an overview, of all rim profiles that you offer? Or is the easiest option to contact you with a set of requirements / ideas?

7
Component Deals & Selection / Re: Chinese cycling clothes
« on: July 09, 2026, 07:01:31 AM »
A while ago I ordered these shorts: https://de.aliexpress.com/item/1005009734029244.html?spm=a2g0o.order_list.order_list_main.80.37865c5fmQUKra&gatewayAdapt=glo2deu (HISERWA Pro Team)

The quality of the short is very good, quite comfy also on longer rides.

My only problem so far is the length of shoulder straps - they are a bit short.

Do you have any recommendations where the lower part (legs) is more less the same, but has longer shoulder straps?


8
Component Deals & Selection / Re: Chinese cycling clothes
« on: May 11, 2026, 12:24:54 PM »
Do you have recommendations for (aero) socks that are available for large feet? I wear shimano EU47 (foot length about 30cm)

I think I have seen a lot for smaller feet, but not really one for my size.

9
Cyclocross Frames, Wheels & Components / Re: Light Carbon LCG074 vs LCG087
« on: April 05, 2026, 02:26:48 PM »
I have the 074 now for a few month. I use for a bit of everything: Gravel, Road, Trails.

And so far I like it a lot. it is very fast, feels responsive and an easy trail is no problem. The only downside so far: accepts "only" 45mm tires at the rear.

10
Cyclocross Frames, Wheels & Components / Re: LightCarbon Gravel LCG074-D Micro Suspension Pivot Design
« on: March 01, 2026, 03:50:12 AM »
So after a few month of riding in the woods, a first report.

I really like the frame, the look is very nice and the ride quality high. Sometimes i have the feeling it is a bit too soft (mainly at high speeds) and sometimes, it could provide more damping (rough descents). So for me it is a very nice build, that I really like riding.

After a couple of rides during muddy winter conditions, I have noticed that the rear tire is rubbing against the frame (near the rear suspension). I use Schwalbe One Pro RS 50mm front and rear. So I guess the 50 mm tire is bit too much for the rear wheel.

11
Cyclocross Frames, Wheels & Components / Re: LightCarbon Gravel LCG074-D Micro Suspension Pivot Design
« on: December 01, 2025, 02:14:21 PM »
So far I really like it. I have tested it on a few nice gravel roads, a bit of single trail, normal roads. Feels good, except for steep descents... which is not really the terrain it is build for.

Maybe I will swap the stem for a shorter one. Maybe also swap the drop bar to something with more flare.

12
Cyclocross Frames, Wheels & Components / Re: LightCarbon Gravel LCG074-D Micro Suspension Pivot Design
« on: November 30, 2025, 01:17:22 AM »
Yes, I did.

After the first ride I was also able to tighten the screw properly. So right now everything feels tight and good!

13
Cyclocross Frames, Wheels & Components / Re: LightCarbon Gravel LCG074-D Micro Suspension Pivot Design
« on: November 29, 2025, 12:45:45 AM »
They call the green colour LCB-08HS Chameleon Green.

The frame comes with fork, spacer, stem and seatpost. Handlebar is from alix https://de.aliexpress.com/item/1005008669466111.html?spm=a2g0o.order_list.order_list_main.137.354c5c5fpc2pyo&gatewayAdapt=glo2deu

14
Cyclocross Frames, Wheels & Components / Re: LightCarbon Gravel LCG074-D Micro Suspension Pivot Design
« on: November 28, 2025, 10:09:05 AM »
If I pull the front brake, I can feel and hear that the shaft of the fork moves a bit.

Until now, I haven't investigated in detail the reason behind this movement.

With a different bike, I had the same behaviour and I could eliminate the movement by tighten the ahead cap.

15
Cyclocross Frames, Wheels & Components / Re: LightCarbon Gravel LCG074-D Micro Suspension Pivot Design
« on: November 24, 2025, 10:02:55 AM »
I have received my frame four days ago.

The paint job is very good, but not superb. If you consider the price, it is absolutely worth it! I will upload pictures later.

After completing the assembly, I noticed that the headset bearing was slightly loose. I tightened all screws to the specified torque. Has anyone else the same problem?

Pages: [1] 2