Did anyone finally figure out if the bearings are 40x52x7 36º/45º or 45º/45º?

Well, I'm having trouble with the frame. I've half sorted out the steering issue, but now I've noticed the rear wheel is much closer to the left chainstay than the right (the one on the drive side). It doesn't seem right to me. Does yours stay centered at the same distance? I checked with other wheels and it's the same, so it's not the wheels.

Hi, I was referring to the aluminum crown of the fork head. On the R088, the lower bearing is mounted directly to the fork. I checked everything again, and the bearings I received are identical: 40x52x7 mm, 36°/45°, both the upper and lower ones. Are yours the same? I'm trying to rule things out because I don't know what else to do. Thanks in advance.

Hi, I assembled my Spycycle frame, size 58, everything seemed perfect, but when I went out to test it, there's play in the headset. I've tried everything, even removing it completely. When I hold the handlebars at the bottom, they move from side to side. No matter how much I tighten them, nothing works. I even tried using spacers at the top. I bought a Spycycle frame and integrated handlebar, so it should work perfectly. I'm desperate. I have it assembled without the metal race on the headset crown, as I understand it's not necessary. I measured the bearings, and they were exactly the same, so it doesn't matter which one I use at the top or bottom. Any help would be greatly appreciated. Thanks in advance.

Hello,

My first post about first build. Order and delivery went smooth and took about 1 month. Weights are in par with another buyers experience.  It's another one with raw carbon glossy finish. I planed to swap everything from my old bike (cracked frame). But in last minute i decided to go with  KOCEVLO TB340 (360-110mm) wich is most interesting part of my build because it was a bit of gamble with no reviews or even mention. Handelbar look cool but quality is average. I only did few very short test rides. My initial feelings are that rxl sl carbon bar with light uno stem in same dimensions is stiffer. Removable cover make internal routing really easy, without it i would stay with old setup. Overall ride feels more comfortable as my previous bike (2019 Radon Spire). I need to fine tune shifting and breaks (some disc rub with power down) and ride more to have valuable opinion.


Hi, sorry to bother you, mate. I love the finish of your frame. How did you get that finish? It's exactly what I want, but I only see the matte and gloss black UD finishes on Spycycle. Best regards and thanks in advance.

Size 54
KOCEVLO TB340 handlebar
ulterga r8000 mech 50-34, pes powermeter 165 mm, shimano cs-hg700 11-34
elitewheels ent 2, conti 5000, ride now tubes
selle italia saddle
tacx bottle cages, shimano m520 pedals, rockbros computer mount
8.1 kg