Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - rebbesen

Pages: [1]
1
Cyclocross Frames, Wheels & Components / Re: How is SP-Cycle G026?
« on: February 26, 2026, 02:11:25 AM »
Quote from: kbernstein on February 19, 2026, 05:18:36 AM
Is there an advantage in choosing one over the other seller?
Is price the same? Customer support? Paint quality?
I have just build up my Mondince F316, and Jack from Mondince was kind to include an extra storage bag, a spacer for 160 mm front rotor, and headset, spacere and a lot of spares, like additional clams for the saddel and for oval saddel. I had a mechanic friend build it up, and he said that the "spares" included was great a several extras. So just wanted to share my experience. I just had my first ride on it yesterday, 32 km i really muddy conditions (as the snow just have left Denmark in the past weekend). But first impression is great :)

You can reach Jack Ding on info@mondincecycle.com, and say hello from me (Rasmus Ebbesen), I'm sure he will give you a good price

2
Cyclocross Frames, Wheels & Components / Re: Mondince new 2026 Aero Gravel
« on: February 05, 2026, 07:49:32 AM »
Quote from: jes2k13 on February 04, 2026, 10:41:28 PM
Hey man I have been looking everywhere for this groupset, I happen not to be stateside I know the answer would be your LBS but where the heck can I get this tasty groupset? Do you have an online link or an e mail where I could ask for a price qoute?

Hi,

I'm in Denmark, so I have actually ordered from r2-bike.com, as also suggested by v0llhirsch. They were the only ones (from DE, which is cheaper than eny online shops in DK) having a complete groupset with crankset in 160 mm w. watt: but I can see that now it's the 170 and 175 in stock: https://r2-bike.com/SRAM-Force-XPLR-AXS-Wide-HRD-E1-Gravel-Groupset-1x13-AXS-Powermeter-Crankset

3
Cyclocross Frames, Wheels & Components / Re: Mondince new 2026 Aero Gravel
« on: February 04, 2026, 06:00:43 AM »
Hi all,
I’m waiting for my Mondraker FM316 frame and I’ve already picked up a complete SRAM Force XPLR 13-speed groupset plus Elite Wheels Aero+ wheels (32 mm internal).

Has anyone here successfully run Schwalbe Thunder Burt 29×2.1 on this frame?

I know actual tire width depends a lot on rim internal width, and with 32 mm internal I suspect the TB 2.1 will measure quite a bit wider than nominal.

If you’ve tried it, could you share:
Measured tire width (mm) on your rim
Clearance at fork + chainstays/seatstays

Thanks!

4
Cyclocross Frames, Wheels & Components / Re: GV201 / GR201 from TanTan / Seraph, LongTeng, Mondince or Tideace?
« on: December 19, 2025, 04:47:03 AM »
Quote from: Hainesy on December 18, 2025, 10:16:31 AM
Frame is ready to ship and got a QA video from Jack earlier (screengrab below).  Looks good I think!

Have they changed the storage box? Looks like a new generation compared with CJs bike?

5
Cyclocross Frames, Wheels & Components / Re: Carbon gravel frame for 29x2,2 or 29x2,4 tires
« on: December 11, 2025, 02:22:05 AM »
Quote from: svedkoko on December 10, 2025, 02:50:44 AM
yoeleo g21 has a clearance of 53mm (it says on their website)

Yes, but it’s not available in most sizes

6
Cyclocross Frames, Wheels & Components / Re: Mondince new 2026 Aero Gravel
« on: December 10, 2025, 02:16:51 PM »
Quote from: CJ on December 10, 2025, 01:50:30 PM
**WORD OF CAUTION RE: INTERNAL STORAGE COVER**

My internal storage cover (+cage and bottle) came off during a gravel race this past weekend.  The locking lever kept moving to the open position regardless of how tight I pressed it in the locked position.

Root cause (with input from Mondince):
Rattle-induced opening of the latch caused by the lever coming in contact w/ the bottom of the bottle cage:


Solution:
1) Move the cage up


2) Add an o-ring at external base of lever to add friction (it's a tad loose by default IMO)


3) Add threadlock to lever assembly bolt

Mondince said they shortened the length of the lever. Hope this helps someone!

Are you still happy with your 316? I'm in dialog with Jack, but with I'm getting a bit second thoughts.

7
Cyclocross Frames, Wheels & Components / Re: Carbon gravel frame for 29x2,2 or 29x2,4 tires
« on: December 08, 2025, 09:01:33 AM »
Quote from: ains on December 01, 2025, 01:01:27 AM
Yoeleo G21 is a bit expensive. Hope new and affordable chinese carbon gravel frames for 700x55 tires will come in 2026 :)

Hi,

I'm in the market for the same as you describe - I agree with your view on the Yoeleo G21, but I have not managed to find anything that claims at least 53 mm clearance. Have you set your hopes for 2026?

I'm pretty close to pushing the button on a Mondince FM316, but I would still like a bit more clearance, but I have a race in April 2026 which I need an upgrade for (currently using at Trek Boone for gravel).

8
Cyclocross Frames, Wheels & Components / Re: Mondince new 2026 Aero Gravel
« on: December 07, 2025, 12:41:32 PM »
Quote from: d.m. on November 24, 2025, 11:24:24 AM
Did you consider seat tube angle?
Yes, FM326 looks long when you are looking at the reach value. But it has 75 degrees seat tube angle. 1,4 deg more than Addict RC. Sounds like not much? I wouldn't say so.
For my 174cm and ~715mm BB to saddle top distance a difference of 1,4 degrees will move a saddle ~17 mm forward which in my opinion isn't insignificant.

Which size did you go with? I’m 176 with 81 inseam - so I pretty close to order a 316 in medium with Jack in raw carbon look

Pages: [1]