Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - lorenzo

Pages: [1]
1
Thank you for the tool! I’ve just uploaded my measurements.

I think you should also post it on Reddit (maybe in r/Velo) to get more data from fellow gear geeks riders  ;D

2
Bought one after seeing your positive reviews. I paid €63 with a coupon on AliExpress, and so far I'm very happy with it.

I get a few false positives, mainly when turning at intersections, but I haven't had any false negatives so far. Battery life is around 7–8 hours using a custom flashing mode (2-second cycle, 25% on-time) and the alert flash when a car is approaching.

On straight, wide roads, it usually starts tracking cars from around 140–160 m away, and I've even seen a few detections at 180 m. Multiple vehicle detection seems good too, tracking up to 3–4 cars.

I'm not a big fan of the design with the multiple LEDs (I personally prefer a single, more focused light like the Varia), but that's just my preference.

Overall, I'd say it's a solid radar, especially for the price.

3
Component Deals & Selection / Re: Geoid PM500 power meter
« on: June 29, 2026, 04:05:43 AM »
I just send a mail to support-geoid@geoidsports.com - but i don't have high hopes.
Just a heads-up, the correct support email seems to be support@geoidsports.com

4

Hi Lorenzo, I have color 4 (dark silver metallic) in matte.
I regret choosing the matte finish a little, as it seems to be very sensitive to scratches. As soon as it comes into contact with something — for example, when placed against another bike — it leaves marks on the paint. I think it probably needs a protective layer on top.
I haven’t seen similar comments here on the forum from people with glossy bikes. Maybe it was advertised as needing an extra protective layer, but I can’t remember.
In retrospect, I would have ordered it in raw carbon (glossy), since the matte finish seems to need an extra coating or paint job anyway.
Thank you. Yes, I had already ruled out the matte finish, since I know it’s almost impossible to keep in good condition.

I managed to get a few color samples by contacting SpCycle through AliExpress. If they can be useful to anyone, I’ve attached the reference images for colors 2, 5, and 10 with a glossy clear coat.

5
I'm trying to decide which color to order for the frame. I'm not sure whether to try a metallic paint finish or just play it safe and order it in UD raw carbon glossy. Do you have any real photo references for glossy metallic color finishes? I tried asking David, but he didn't respond and aside from this reply in the thread, I couldn't find much.

6
Anyone have recommendations for headlights? Built and ebike a while back and I'm wanting something big and bright for commuting that also won't blind oncoming traffic.

Looking at some of the variations of this light https://www.aliexpress.com/item/1005005852631816.html?
For not blinding oncoming traffic, you need a light with a beam cut-off. For winter/night riding, I use a MagicShine HORI 1300PRO, and it’s almost as bright as car headlights. It’s on the expensive side, but it’s well made.

7
Component Deals & Selection / Re: Geoid PM500 power meter
« on: May 10, 2026, 01:39:47 PM »
Do you know if it is possible to change the crank length of my PES505 by buying some Senicx PR3/PR4 cranks?

They have a different interface, so they won’t fit. If you contact Magene via email, you can order just the PES cranks. I bought a set a while ago; I think it was around $70 shipped.

8
Road Bike Frames, Wheels & Components / Re: ICAN A23
« on: May 10, 2026, 02:30:00 AM »
If you want something that looks like the SL8 without spending a fortune I recommend the R088 (I personally have it) https://it.aliexpress.com/item/1005008125947180.html
The R088 was on my list and I was close to buying it, but from what I read, I figured the ICAN frames were a touch better, especially when it comes to the paint quality.

9
Road Bike Frames, Wheels & Components / ICAN A23
« on: May 07, 2026, 07:19:27 AM »
Hi everyone,
does anyone have any experience with the ICAN A23? It seems to be a fairly unpopular frame, I haven’t been able to find any builds or reviews of it.

Sherry from ICAN quoted me $535 + shipping for the frame only (without the handlebars).

At the moment, I’m trying to decide between the ICAN FL1 and the A23 (or some other SL8-inspired frame)

10
Hmm, is the QED back on track?

This screen is from Panda Podiums IG and the Magenebooth over in Shanghai...

I've heard that they estimate a late 2026 release in Europe.

Pages: [1]