Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - jaytee

#1
29er / Re: Klaster_1's Dengfu M06 build
September 03, 2017, 08:56:06 PM
I'm running a 120mm Fox 34 on my M06 and love it, I did have a 100 fox32 on it for a couple of weeks but i prefer the longer fork.

#2
29er / Re: Charles M06 XL build
May 09, 2017, 10:26:43 PM
The more you ride the better you'll like it. I also have the rear spacing out a few mm and at first had a bit of ghost shifting but i tracked it down to the full cable where it goes under the the BB at first i had zip ties around the cables to stop rubbing on the BB.
I replaced inner and outer cable and ran a piece of plastic tubing over the cable in a arch where it passes from the main frame to rear so it can move freely with the suspension and it now has crisp gear change.
I tried 100 forks at first then went to 120m fox 34s  seems to really suit the frame for me ......loving his bike so far.
#3
29er / Re: Klaster_1's Dengfu M06 build
March 09, 2017, 02:48:53 AM
Looks great will the green Fox forx.
#4
29er / Re: Klaster_1's Dengfu M06 build
March 06, 2017, 04:15:32 PM
Quote from: steven-iam on March 06, 2017, 08:05:42 AM
Quote from: jaytee on March 06, 2017, 05:12:31 AM
I bought this shock from Chain Reaction and the standard bushes fitted to the shock were the correct size.
http://www.chainreactioncycles.com/au/en/fox-suspension-float-dps-a-rear-shock-2016/rp-prod155132
That's great news. Thank you Jaytee.
I ended up buying the RWC 21.85mm. I ordered a Rock Shox Monarch xx w/ remote lockout from Walmart.com ($230).
https://www.walmart.com/ip/RockShox-Monarch-XX-Shock-6-5-x-1-5/171913683
(also on ebay from same supplier)

FYI, Kelsey at Deng Fu informed me that they only supply one 8mm shock pivot bolt, so I ordered a second for $6, along with an extra Thru-Axle for $10 and a couple extra Derailleur hangers in case they are hard to find.

I ordered the bike with a custom logo which takes an extra 15 days, so I still have another week before they ship. Their website says it can take up to a month for delivery.

Interesting mine came with 2 shock bolts. I wish i was told the through axle bolt didn't come with the frame I'll have to find one now.

The only problem i can see with the frame is they have positioned bottle cage too far up the down tube. A bottle won't fit under the shock and if i turn the shock around i cant use the remote.
i see from previous drawing on here, dengfu have the cage bolt hole drilled a 180 from the BB which would work ok........my frame is drilled at 225mm which is useless. :'(
#5
29er / Re: Klaster_1's Dengfu M06 build
March 06, 2017, 05:12:31 AM
Quote from: jaytee on March 06, 2017, 04:56:30 AM
Quote from: Klaster_1 on March 05, 2017, 04:55:39 AM
Quote from: jaytee on March 05, 2017, 03:16:50 AM
I have just bought a 17.5 M06  fitted  a 2017 Fox 165x38....... measured with shock fitted have about 56mm of travel so it should be fine.
What mounting hardware width did you use?

I bought this shock from Chain Reaction and the standard bushes fitted to the shock were the correct size.

http://www.chainreactioncycles.com/au/en/fox-suspension-float-dps-a-rear-shock-2016/rp-prod155132
#6
29er / Re: Klaster_1's Dengfu M06 build
March 06, 2017, 04:56:30 AM
Quote from: Klaster_1 on March 05, 2017, 04:55:39 AM
Quote from: jaytee on March 05, 2017, 03:16:50 AM
I have just bought a 17.5 M06  fitted  a 2017 Fox 165x38....... measured with shock fitted have about 56mm of travel so it should be fine.
What mounting hardware width did you use?

I bought this shock from Chain Reaction and the standard bushes fitted to the shock were the correct size.

http://www.chainreactioncycles.com/au/en/fox-suspension-float-dps-a-rear-shock-2016/rp-prod155132

#7
29er / Re: Klaster_1's Dengfu M06 build
March 05, 2017, 03:16:50 AM
Quote from: MickeF on March 03, 2017, 05:22:23 AM
Quote from: Charly42 on March 02, 2017, 11:37:59 AM
Quote from: MickeF on February 26, 2017, 04:00:21 PM
Quote from: Charly42 on February 26, 2017, 08:11:03 AM
hi klaster

i'm french and, on a french forum, a men have the same frame(19"), but he have a problem with this frame...


Hi,
is it possible that he's using a shorter shock?, e.g. 152 mm instead of the required 165/38mm?
/Micke

Hi , no . it's ok he have a 165*38.
A other men in france have the same problem with this frame but in size 15.5".... .
I have send, with the other men in france amessage to dengfu. Normaly, i have a reponse this WE.

Can someone with the frame measure the distance "X", from bridge to seat post when the distance between shock eyelet is 165 mm?
X should be more then 38 mm...

Se picture:

I have just bought a 17.5 M06  fitted  a 2017 Fox 165x38....... measured with shock fitted have about 56mm of travel so it should be fine.