Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - shanetab

#1
Hey everyone,
I'm gearing up for my first 70.3 next summer (about 8 months from now) and am putting together a dedicated budget-friendly TT bike for it, so I'm building up a Velobuild VB-TT-023 frameset as my race rig.
I have a pre-purchase TT bike fit scheduled for the end of this month to dial in my exact frame size, stack/reach, and crank length before I hit "order," and I already have a local mechanic lined up to assemble it once everything arrives. Before I finalize my shopping carts, I wanted to get a sanity check from the community to make sure I'm not overlooking any compatibility quirks or small parts.

Current Build List
Frameset: Velobuild VB-TT-023 (disc brake, T47) — planning to request an extra derailleur hanger, extra screws, top-tube bento box threads, & 70mm total stack spacers from Velobuild
Groupset: Wheeltop EDS TT Wireless Carbon Electronic (Hydraulic Disc Brake version)
Crankset / Power Meter: GEOID PM500 power meter crankset (24mm spindle, SENICX PR3 arms) + 4-bolt 110 BCD chainrings & chainring bolts
Bottom Bracket & Drivetrain: T47 24mm BB (ZTTO or SENICX), GOLDIX cassette, compatible chain
Wheels: Superteam 60/88mm carbon disc wheelset
Brakes: 2x Shimano-compatible rotors + lockrings
Tires & Tubes: Continental Grand Prix tires + inner tubes (with 80mm+ valve extenders or extra-long valve tubes)
Touchpoints: ISM Adamo saddle, titanium pedals, bar tape
Small Parts: Internal cable/hose foam dampener, hydraulic hose olives & insert pins

Questions I'd Appreciate Input On:
Wheeltop EDS TT + VB-TT-023 Experience: Has anyone here built up the VB-TT-023 with the Wheeltop EDS TT hydraulic groupset? Any routing quirks through the integrated stem/basebar, hose length issues, or firmware/setup tips I should know about?
Compatibility & Missing Pieces: Does anything in this drivetrain/brake setup clash (especially pairing the GEOID PM500 110 BCD spider/chainrings with the Wheeltop EDS TT)? Are there any small hardware items (specific rotor sizes, flat-mount caliper bolts, carbon paste, etc.) I should make sure to order upfront?
Bottom Bracket Check: Since the VB-TT-023 is T47 and the GEOID PM500 uses a 24mm spindle, is a standard T47 24mm BB (like ZTTO or SENICX) all I need here?
Carbon Stem Splitting Issue: I read some reports of the Velobuild carbon stem splitting past 2Nm and people recommending an alloy stem instead. Does anyone know if this is still a common issue on the VB-TT-023 (or if it's mostly limited to Size S)?
Shorter Stem/Basebar Bolts: I spoke with Chris at Velobuild and was told to get shorter screws (12mm including the bolt head, instead of the 20mm w/ head / 15mm w/o head bolts that ship with the bike). Has anyone else had to swap these out on the VB-TT-023, and are there any other hardware quirks I should prepare my mechanic for?
70.3 Setup Suggestions: Any recommendations for hydration/nutrition mounting on the VB-TT-023 (beyond the top-tube bento box threads) or tweaks you'd make to this list specifically for a 70.3?
Thanks in advance for any feedback or suggestions!