Thanks, but no. The Manitou fork (brand new for the bike) is really nice, and not worth the hassle or money to replace.

Might get some action shots next week.

Spring is here and so are the final parts, the Swedish Mail has had some serius trouble with milions of chineese packages every week this winter. The stem and some other parts took forever to get.

The weight is 10.6kg and it feels light. A lighter fork and lighter wheels could save 1 kg, but that would double the cost of the bike. I originally bought Grip-shift, but after having two shifters fail on the bike stand I went for triggers. The defective shfters are sent back for warranty replacement. Tyres are Nobby Nic 2.25 Folding LiteSkins. Still good clearance and gives a bit of a plus-feeling on a kids bike. Cassette is a Sunrace 11s 11-46, same as I ride myself. Nice for casual trail riding.

@bxxc: Thanks for your help, much appreciated, I guess that you are still subscribed!

Thanks. The Level brakes were a slight disappointment. The reservoir / handle / piston unit is huge. I am sure they will do the job, but they look clumsy, unfortunately. Had I known, I would have gone with something from Shimano at the same price, I run XT/SLX on my own bikes and Deore is far slimmer than theese Level brakes.

Now I have also installed the bars and brakes, hoses are not cut to proper length. Rear mech is in place

The bike will get red as accent colour - I have a list of red things on order: Pedals, seat post clamp, shift cable housing, headset spacers and some other small bits and pieces!

The steerer tube was cut to a preliminary length, way too long. Will be adjusted later. I have short Wake stem on order, same as shown earlier by OP in this thread.

155mm NX cranks in place.

And so it begins... for starters I hade to make a BB press-tool. 3/4" MDF, M12 threaded rod, some washers and nuts. Mating faces were greased before installation. BB went in witout issues.

I bought mine from https://www.aliexpress.com/item/MTB-bike-cheap-frames-china-Best-Carbon-MTB-Frame-26er-Mountain-Bike-Frames-BB92-For-26ER/32753161894.html

Here is the frame - as stated above - it's black and fairly light!

Took a trip to the post office today to pick up a box of red SRAM-candy! Here pictured with the Manitou fork.

Pics will follow...

Are away at the inlaws now...

Did some shopping:

Cranks: SRAM NX 155mm
Rear mech: NX 1x11
Shifter: SRAM GX grip-shift
Cassette: Sunrace 11-46
Generic chinese carbon seat post, no setback
Chinese carbon bars
SRAM Level brakes

It's black... 

Will probably go for SRAM NX cranks, they are available in 155mm stock. I have the taps to drill and thread longer cranks, but most other options seem more expensive.

The frame finally arrived! Took forever for them to ship it, but they eventually did and it looks good.

Seat post clamp was missing, but it will be sent to me.

Now the hunt for parts begins!

It might be a good idea to measure her current cranks She rides a 24" alu Trek MT-200 to school and a 24" carbon MTB on the weekends. Will measure both.

No racing for us so carbon is over the top, but I got a really good second-hand deal on the 24" carbon bike. For the 26" I have been looking for a small and light alu-frame for some time now with no luck. I ended up paying $260 for the FM-frame (plus VAT over here possibly) and that makes it a viable option.

I´ll keep you posted. Fork arrived this week, the frame shipped out today. Guessing that cranks may be the hardest parts to source.

Frame & fork ordered. Fork will be a Manitou Marvel Comp, found a good deal on it. Air, rebound, compression.  I have wheels and carbon bars, will do some bargain hunting during the winter for brakes and drivetrain. Over and out for now, the frame will probably be few weeks.

Greetings from Sweden!