Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - YEEPYEEP

Pages: [1] 2 3 ... 5
1
29er / Re: The Shiny New AM831 Group Buy (A) Thread!
« on: December 14, 2021, 12:57:45 AM »
No one should be paying a cent for the new triangle including the shipping fee. They sent you a defective item, they should fix it. Lucky I didn't purchase this frame, sounds like a headache.

2
29er / Re: Ican p9 build 29er build
« on: September 10, 2021, 10:07:46 AM »
Quote from: stefanyo on September 09, 2021, 03:53:37 PM
No worries Yeep,

Did your frame comes with cable guides for internal cabling?

Don't think there was

3
29er / Re: The Shiny New AM831 Group Buy (A) Thread!
« on: September 07, 2021, 06:09:46 AM »
Quote from: xtinction on September 07, 2021, 03:09:59 AM
The current hightower v2 can barely run a coil with its flip chip on the low setting. This frame doesn't have a flip chip and so it mimics the hightower in its high setting . So i highly doubt u can run a coil in the frame

Quote from: JJJ on September 06, 2021, 11:50:32 PM
I believe this was answered. The Santa Cruz does not fit a coil shock, so this frame most likely does not either. Check https://www.santacruzbicycles.com/en-US/bikes/hightower#technical-support

Thanks guys, Will wait for afew more reviews on the frame before ordering.

4
29er / Re: The Shiny New AM831 Group Buy (A) Thread!
« on: September 06, 2021, 07:17:37 PM »
Quote from: FlaMtnBkr on September 06, 2021, 02:59:02 AM

I have most parts except for a few still trickling in and was told about a week ago it was heading to paint so hopefully will ship soon. I can try to document the build with pictures if anyone is interested? We are the first ones building it up and can hopefully help each other out if anyone has problems.

Would be good if you and anyone else who bought the frame document the build process to see if there's any flaws etc. Also would this frame fit a coil?

5
29er / Re: Ican p9 build 29er build
« on: September 06, 2021, 01:28:08 AM »
Quote from: stefanyo on September 02, 2021, 01:39:18 PM
Hi,

Any idea on the measurement of the headtube? Does P9 has the IS41/28.6 upper and IS52/40 bottom diameters?

Sorry Mate, can't check as i've sold the bike.

6
29er / Re: The Shiny New AM831 Group Buy Thread!
« on: July 11, 2021, 06:15:39 AM »
Quote from: Mikey12345 on July 09, 2021, 02:51:31 AM
There is a shop near me that does carbon repair and can do x-ray service on frames (spyder composites). I am thinking about reaching out to them for a quote on an X-ray and, depending on price, getting the scan done on the frame when I receive it and sharing the results here to give us all a better idea of the integrity of the frame before we all send it on the trails. Let me guys know what you think, and whether or not it would be completely unnecessary or useless and something I should just not do.

That would be very helpful for the community!

7
29er / Re: ICAN P9 build
« on: June 28, 2021, 11:09:48 PM »
Quote from: Icyseanfitz on June 28, 2021, 04:14:39 AM
I got a 2021 lyrik ultimate with 42mm offset, I take it the smaller offset will make the wheelbase slightly shorter and easier to turn in to corners.

Sounds good! I was on a 51 offset and if I went with the 42, it would've help with the corners.

8
29er / Re: ICAN P9 build
« on: June 28, 2021, 02:40:32 AM »
Bike is so good downhill especially with a coil! only thing I was unsure about with the p9 was the fork offet. There was 2 documents with different offset though you'll enjoy the bike regardless.

9
29er / Re: Chinese SC/AM831 Group Buy
« on: February 15, 2021, 05:34:31 PM »
Quote from: RobertRinAustin on February 15, 2021, 12:49:17 PM
Haha, did she specify May of which year?
She didnt  ;D

10
29er / Re: Chinese SC/AM831 Group Buy
« on: February 12, 2021, 11:21:14 PM »
Spoke to jenny from miracle, frames won't be available till May.

11
29er / Re: Chinese SC/AM831 Group Buy
« on: February 03, 2021, 11:41:43 PM »
Quote from: Sitar_Ned on February 03, 2021, 11:15:29 AM
Thanks for the info. Not sure if it's worth the effort for a $50 dollar discount? Open to the opinions of the group.

Pretty disappointing how the original seller just bailed out of the deal.

At this rate, it would be best for individual purchases. Hopefully there's updates from people who have already bought the frame.

12
29er / Re: Chinese SC/AM831 Group Buy
« on: February 02, 2021, 07:33:40 PM »
Posted in the other thread as well. Sent a message to topfire. Production is starting after chinese new year for larger sizes. Price is 680usd so not as good as the inital 499usd price. 10pcs less $30 50pcs less$50.

13
29er / Re: Chinese Santa Cruz/AM831
« on: February 02, 2021, 07:32:11 PM »
Sent a message to topfire. Production is starting after chinese new year for larger sizes. Price is 680usd. 10pcs less $30 50pcs less$50.

14
29er / Re: New Enduro Frame FS830
« on: January 19, 2021, 05:51:45 AM »
Anyone purchased this frame?

15
29er / Re: Chinese Santa Cruz/AM831
« on: October 22, 2020, 03:17:45 PM »
Quote from: bbr on October 22, 2020, 09:21:34 AM
Take the red pill.  If you can build a frame and buy parts for it. You can seek it.

Sure.....

Quote from: AV_RIDER on October 22, 2020, 10:25:51 AM
https://m.alibaba.com/product/1600115599037/product.html?__detailProductImg=//s.alicdn.com/@sc01/kf/H8167d4d8ca29428fbe4e660809bc96f3L.jpg_220x220.jpg

Looks like the supplier might be Xiamen Carbon speed, based on the product description.

Thanks av_rider for the link.

Pages: [1] 2 3 ... 5