Show Posts

1

29er / Re: Ican P10 enduro frame, that's right, P10

« on: June 28, 2022, 10:02:07 PM »

I'm speaking to Melody at Ican about this frame at the moment.
They are only making these in a medium but from the numbers, it is more comparable to the large P9 I have (actually has slightly longer reach and is longer overall)
Also the linkage is completely different to the Lightcarbon one so there may or may not be some extra room for a coil shock in there.

2

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: June 01, 2022, 11:18:29 PM »

Quote from: Icyseanfitz on May 31, 2022, 07:38:50 AM

Is42 top but what about bottom?

https://9point8.ca/collections/slack-r-kits/products/foxtrot-slack-r-kit?variant=41077932720279

3

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: May 31, 2022, 05:31:44 AM »

Quote from: Icyseanfitz on May 30, 2022, 02:02:24 AM

Might be interested in a slack-r myself to bring my seat angle forward a bit as I've a 180fork on my p9. Which version did ye buy? Is42/is52

IS42 then whatever head stem length is on your size frame

4

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: May 29, 2022, 05:50:54 PM »

Quote from: endo.alley on May 29, 2022, 05:43:23 PM

My opinion is get yourself a Slack-R headset slacker to get the front end down to about 65 degree head angle. I put one on my P9 and it was a great game changer on this bike.

That's the plan. Going from a 51mm offset to a 44mm offset fork has made the front end a bit twitchy.

5

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: May 29, 2022, 05:12:23 AM »

Been a while but here's an update on the bike.
- I finished 11th in elite last year for our Enduro Series, just missed out on a top 10 due to a mechanical on the last round.
- Snapped the top tube clean in half due to flat landing from 3m up on a blind jump. (I don't think any carbon bike would have survived)
- Bought another frame from ICAN which was easy as and still beat on it hard every ride
- Swapped to a Marzocchi Bomber Z1 coil fork yesterday and it's like it was made for this bike.

So it's a full coil bike now and the suppleness is amazing yet it still takes the big hits rarely bottoming out.

6

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: September 13, 2021, 05:26:07 PM »

Quote from: Icyseanfitz on September 13, 2021, 04:07:09 PM

Chainstays cracked yeah?

Can't be 100% sure, it may have been the top layer of epoxy separating at the thinnest points.

7

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: September 13, 2021, 08:04:57 AM »

Quote from: afri123 on August 29, 2021, 03:52:26 PM

I'd be interested, sounds great! Would you be willing to share your files in case you're not going to print for others?

Here you go. Print in TPU at 30% infill

8

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: September 13, 2021, 07:51:43 AM »

Gave my bike a bit of an update 2 years on.

Repainted in Grey with black rear end and forks
Added a chain guide with tensioner as the chain was slapping on the swing arm
Swapped out the Super Deluxe for a Marzocchi Bomber coil
Put a 170mm airshaft in the forks, up from 160mm
Ordered custom Lyrik decals then got my mate to design me up some new ones to match.

Now for a PSA. Check your lower swing arms as they may be cracked. Mine looked to be cracked at the thinnest points inside and outside. ICAN are sending me one for free luckily.

9

29er / Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings)

« on: August 02, 2021, 12:55:14 AM »

My bad guys, kinda glossed over the bit about integrated head sets.

On a side note, if you are putting a Marzocchi Bomber CR coil in this frame, you will want the 22.2 mounting kit as I have just fitted one to mine. I had planned on skimming these down to 22 but they just go straight in, 22 would have been too loose.

10

29er / Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings)

« on: July 29, 2021, 06:46:39 PM »

Quote from: Icyseanfitz on July 29, 2021, 05:53:23 PM

What offset headset you planning on using?

Wolf tooth have one that will do -1°

11

29er / Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings)

« on: July 29, 2021, 04:13:12 PM »

Quote from: mb2bike on July 29, 2021, 10:34:15 AM

Thinking about a 170mm Rockshox Lyrik in Boxxer Red or a Marzocchi Bomber Z1. Favoring the Lyrik though!

Already ordered the bushings. Looking forward to receiving them.

I'm about to change my 160mm Lyrik to a 170 with another air shaft. I just need a little more travel out of this rig now.

Also planning on buying a set of offset head cups to slacken it out to 64.5

12

29er / Re: ICAN P9 29ER ENDURO BUILD

« on: June 16, 2021, 12:38:51 AM »

Almost 2 years have passed since building this up and it's been bulletproof. Many a huge crash and it's only got a few small scars.
Finished 15th then 16th overall in elite class for our state enduro series the last 2 years.

And a pic incase anybody is wondering how strong it is.

13