Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - T715

Pages: [1] 2
1
29er / Re: Lexon 258 Full-Suspension XC
« on: June 17, 2022, 02:55:30 PM »
How about some feedback and reviews please...

2
29er / Re: BXT MTB 056?
« on: February 04, 2022, 02:55:57 PM »
29 2.25 shwalbe racing ralphs on spank rims and M1 hubs.
got a reba since I dont intend to do heavy trails anyway...
So far I am satisfied...
https://imgur.com/a/woylZwY

3
29er / Re: BXT MTB 056?
« on: February 04, 2022, 01:41:59 PM »
got mine running... fast as a bullet!

4
29er / Re: BXT MTB 056?
« on: January 30, 2022, 09:14:07 AM »
Pleasantly surprised how fast delivery was... I got mine in just 6 days!

 

5
29er / Re: BXT MTB 056?
« on: January 26, 2022, 04:39:54 AM »
Quote from: RobinRLS on January 26, 2022, 02:24:30 AM
Mine is finally assembled, everything was done very easily, this is the first time that I have really had no problem assembling a bike.  I will take some photos today to present the bike to you, even if it is nothing extraordinary.  I find it beautiful despite everything!
great, do give specs too....

6
29er / Re: BXT MTB 056?
« on: January 25, 2022, 05:57:21 AM »
I couldn't wait so I ordered mine too... lol

7
29er / Re: BXT MTB 056?
« on: January 18, 2022, 06:28:10 AM »
any update on this frame? how does the bike ride and how does it look?

8
29er / Re: Cabon Frame Manufacturer Ranking
« on: January 15, 2022, 12:51:29 AM »
Quote from: Snacks on January 14, 2022, 02:05:33 PM
I can also tell you ive had a terrible experience with tantan/winow/seraph( all the same company) and heideli/tidace.
I find the negatives to be a better basis than the positives because it often points to the issues the manufacturer has than the personal preferences that make the bikes nice.
Quote from: RongGearRob on January 14, 2022, 07:36:28 PM

One of the best pieces advice I saw somewhere was to pick a frame from a brand that would put their brand name on the frame (as opposed to a knock off of some other frame without branding). I went with the Lexon Riot 10 for what it is worth, you can see my posts in that thread as I went through the research, to purchase, to build journey.  Lexon brands the frame, although I went with the matte black and no Lexon branding, additionally the frame is used by a pro XC rider, Eva Lechner.  If it is good enough for her, I figured it was more than good enough for me as a middle of the pack finisher in CAT 2.

Good luck and enjoy the journey.
 
Thank you for the write up, Lexon is one of my current considerations atm but it doesn't have the geometry I want. BXT which also brands their frames seems to be getting occasional bad feedbacks but has that geometry I like. Also from some feedback it sounds like BXT is a lower tier manufacturer which I want to confirm if there such a thing as ranking or tiers.
Hambini reviewed several chinese frames and gave his thumbs up so I want to know which ones to avoid....

9
29er / Cabon Frame Manufacturer Ranking
« on: January 14, 2022, 11:29:16 AM »
With so much manufacturers coming from China, Which ones are good, decent and bad?
Is there such a list where certain brands are better or tested to be good...
Do you have a top 3 brand from china that you can recommend?
I actually would like to know also which ones you recommend to stay away from...

10
29er / Re: 29er XC Hardtail - Boost - Modern Geometry
« on: January 02, 2022, 10:13:42 AM »
Quote from: carbonazza on November 27, 2021, 11:14:59 AM
I did order two M29 from Haideli, 69ºHA and 425mm chainstay in size M.
With a more reasonable and usual price for a HT: $350, then with accessories, paint and shipping to Europe at about $1400 for both.
How are your bikes coming along? hoping for some feedback....
Cheers

11
Component Deals & Selection / Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
« on: December 28, 2021, 09:11:45 AM »
From Ztto page....

Spoke length for reference

M1 with ERD 596 Front brake side:300 other side:302 Rear brake side:302 driver side:300
M1 with ERD 562 Front brake side: 283 other side: 285 Rear brake side: 285 driver side: 283
M1 with ERD 583 Front brake side: 294 other side: 296 Rear brake side: 296 driver side: 294
M1 with ERD 589 Front brake side: 297 other side: 299 Rear brake side: 299 driver side: 297
M1 with ERD 559 Front brake side: 282 other side: 284 Rear brake side: 284 driver side: 282
M1 with ERD 602 Front brake side:303 other side:305 Rear brake side:305 driver side:303


I just made mine using Spank Flare 24 OC... and it looks sweet.

12
29er / Re: Looking for carbon hardtail recommendations and feedbacks
« on: December 26, 2021, 07:03:17 AM »
thanks... still not decided yet but leaning on the 029...

13
29er / Re: Looking for carbon hardtail recommendations and feedbacks
« on: December 25, 2021, 11:06:24 PM »
Quote from: Arno Knell on December 25, 2021, 11:32:47 AM
I think the upper port on the left side allows also to pass the dropper hose.

Sorry for my poor english.
I think that is for the brakes and rear derailleur.

14
29er / Re: Looking for carbon hardtail recommendations and feedbacks
« on: December 25, 2021, 07:21:48 AM »
Quote from: Arno Knell on December 25, 2021, 03:24:49 AM
We have ordered two Spcycle Model SP-M05.

https://a.aliexpress.com/_mq6BMBS
That was one of my choices as well... I like the bottom bracket being threaded against the press fit one but I already have a seatpost and dropper post that is 31.6mm. Plus that frame has no port for an internal dropper post.
As for the geometry, the fork length changes the head angle and using 120mm would put me at the same 68.5 degrees.
Thank you but I do look forward to your pictures and review please.

15
29er / Re: Looking for carbon hardtail recommendations and feedbacks
« on: December 24, 2021, 03:38:12 PM »
I sent you an email.... Cheers
Do include the MTB 029 frame price please.

Quote from: Eddy-haideli on December 23, 2021, 08:37:57 PM
Feel free to contact me for the mold FM-M028

We got it.

Eddy@haidelibicycle.com

Pages: [1] 2