Here is the painted frame.
I used a 2 part epoxy primer from Eastwood to start.  Then I used some orange and grey/blue paint from Toyota for the basecoat.  Then topped it with 3 coats of gloss clear. 

primer  https://drive.google.com/file/d/1I5vQ3dbnBnymvywautuMinxt51Y02zKg/view?usp=sharing

orange in the places for graphics  https://drive.google.com/file/d/1I2J80GZBV9vnT39oCtU6o38ri12Ym_WZ/view?usp=sharing

Blue basecoat after tapeing the orange  https://drive.google.com/file/d/1HuecTLAPT3aCABnqNJ6LAl7RUFxQTJZ6/view?usp=sharing

after removing the tape and before color sanding   https://drive.google.com/file/d/1HkpOplYPfZhFj4vpxwtd8_G9QpvIUtg1/view?usp=sharing

                                                                           

Is the picture posting to the site not on anymore?  I was going to post some pictures up of my build.

The frame should be here this week or the beginning of next week. good thing they had my size in stock otherwise it would be May before I saw it. In the meantime, I have been stockpiling parts for the build. here is my build sheet so far
lefty carbon for 29 with lockout
project 321 tapered lefty adapter
dt swiss 240 hubs front and rear
SRAM gxp carbon cranks
wolf tooth 34  T oval chainring
slx 11 42 cassette   
XT shifter and  derailleur
SLX brakes
51mm light bicycle carbon rims
thudbaster Seatpost
 

I just ordered the FLX-FR-701 for a project build. In the tech specs online it calls for a BB92. My question is on the headset size. I could not find out what combo I need to order for the taper head tube. I see that it mimics the CS-496 frame that was built upon this site. So, I searched for the topic in the 496 builds, but it looks like that frame came with a headset from the factory and there was no mention of the sizes used.  Anyone that built a 496 know what headset size was used?  would it be best to measure when the frame gets here in a couple of weeks?  Thanks for any input