Hi,

I was just wondering, how close can you come a bike like Specialized S-Works Turbo Lev 4 with Chinese engine and battery?

Has anyone installed a rear bike rack on this bike? And if so have any recommendations for racks that fit well?

I will order a Magene P505 on the 11.11 sale and hope it fits I dont hear otherwise.

Quote from: kbernstein on November 07, 2024, 07:46:07 AM
Geoid GPS (which from what I understand is a magene subbrand)
www.aliexpress.com/item/1005007716076558.html
This one looks to be the magene C606 with blue buttons. Doesn't seem like there are other differences. I've had a bad experience with the c606 due to the shitty software on android but for that price I would still consider it

It looks to be identical with c506 not c606 on speccs. Still cheaper than c506.

Quote from: kilka on November 06, 2024, 10:12:05 AM
Thank you very much!

I am also considering it for a G068 - please let me know if you think it will fit

Quote from: SirBikealot on November 01, 2024, 04:07:51 PM
Did you go to checkout or just the basket? Vat is discounted on the last step before you klick the final buy button

Yes. When I go to checkout the VAT is added on top - so even higher price..

Yes. Seems like I need a vpn. I am located in Norway, but the price is before VAT also.

Wierd. It says 230 euro for me? Official store no chainring.

2 weeks to ship, then I received it 40 days after placing the order.

Ludo did you do anything to the open gap at the front (the lowest spacer is bent upwards facing forward)?

Anyone have fitted a Magene P505 crank to this frame?

https://www.aliexpress.com/item/1005005506880823.html?spm=a2g0o.productlist.main.1.e403186aVBEHMV&algo_pvid=54bf5c07-0423-474e-97b6-f4b328dc7353&algo_exp_id=54bf5c07-0423-474e-97b6-f4b328dc7353-0&pdp_npi=4%40dis%21NOK%213527.57%212680.93%21%21%21313.95%21238.60%21%40211b813c17303174858873417e5b2a%2112000033438014563%21sea%21NO%216107118458%21X&curPageLogUid=DOPECF8vwn2J&utparam-url=scene%3Asearch%7Cquery_from%3A

I see here they specifically say "Not Support T47-86.5mm and BB386 bottom bracket ！" - anyone know why?

Example this one I assume will fit into the G068 and then a Magene P505 stock should fit?
https://www.hambini.com/product/t47-86mm-threadfit-shimano-racing-bottom-bracket/

Thank you for helping! I am quickly finding out I am definitive not a bike mechanic (first bike build..).

Got the crankset on, but now when mounting the back wheel I see the disc brake is too far from the rotor (160mm).

I have used the zrace XG rotor with a spacer for 160mm rotor like i used on the fork. Anyone had similar issue? 

I have the G068, but not sure if it is symmetrical or not. But did you also have a hard time getting the crank through the BB? If it slid eaay i could trial and error with the spacers to see what makes sense. But I had to hammer with a rubber mallet. Also getting it out again when I saw the gaps was same struggle.

Thank you, yes. What side do I use the thick one and the thin one?

I am almost complete with my build, but I was now installing the crankset.

I have this crankset: https://www.aliexpress.com/item/1005006733493958.html?spm=a2g0o.order_list.order_list_main.10.f62e1802jlS1ER

EVOSID Road Bike Crank 165 /170/175mm Chainring 40/42/44/46/48T Gravel Bicycle Integrated Fire Crankset 11/12 Speed Folding Bike 44T

But there seem to be a gap on both sides so did I order too wide crankset? Also I had to hammer it through the bottom bracket with a rubber hammer, is that normal?