Quote from: carbonazza on March 26, 2023, 04:39:51 PM
What printer do you use for carbon fiber reinforced nylon?

I got a RatRig V-core3 with heated enclosure for printing nylon.

Winters are long here in northern sweden so i did some more cad work.
This came to be because i could not use my fidlock bottle holder with my oneup pump mount. The bottle needs to be able to twist to release and would hit the pump.
My design puts the pump lower out of the way. And then i got to thinking it would be fun to "even out" the design with something on the other side of the bottle holder. So i put a little box there that fits two co2 cartridges, but it can hold other stuff aswell. It is designed to fit the downtube quite snuggly, just enough room for some padding material.
I printed it in carbon fiber reinforced nylon but could be printed in abs or some other strong filament.
If anyone is interested i can upload the files!

Quote from: Bennykyu on October 31, 2022, 10:47:09 AM

I did printed out the mudguard that shared by Tjhosan to see is it fit float x2,
however it is a blind section, i guess it is ok, as i survive 2 feet drop and huge road gap without cracking the mudguard..

If you want i can make the cutout bigger in the mudguard! Just tell me how much more clearance you need, if i can get the diameter of the float x2 and how far from the bottom eyelet that diameter is i can model it easy.
Glad someone found it useful! 

Quote from: G161 on October 08, 2022, 07:12:08 AM
Please could you share that file!

Thank you.

Absolutely! Here it is.
https://www.thingiverse.com/thing:5554272

Quote from: vidlee on October 07, 2022, 08:38:45 AM
Yup. That is a Fox x2. It fits within the frame and has about 2-4mm of space on the sides. The back sticks out a bit (<1mm) so the cover, for the rear tire, does not fit. I intend to remove some material on the cover so that I can re-install it.

I had that problem when i mounted my Öhlins TTX2 Air. I designed a new cover that can be 3d printed that have space for the larger shocks.
It prints flat but is easily bent to proper shape. I am happy to share the stl file if anyone wants to print it.

Edit: link to file https://www.thingiverse.com/thing:5554272

So this is my LCFS947 so far. Still waiting on some parts so it is not complete. But damn am i happy with the colour! Was trying to find something like the Öhlins yellow but with a pearl/metallic effect and found a Porsche colour that looked right. My first diy paintjob and is super happy.
And being a swede i had to splurge on the Öhlins suspension..

Shit. Sorry! Those are some huge pictures..

Edit: I managed to fix it

Quote from: Remedy 7 on September 27, 2022, 05:29:15 AM
Can you share a pic?

Yeah absolutely! Will this do?

Just got my frame and everything looks good exept the hole for the rear axle is a very sloppy fit. 12.7mm is what i measured.
Anyone else notice the same?