1
Component Deals & Selection / Re: 3D Printed Saddles
« on: April 24, 2025, 10:45:03 AM »
I just ordered this one, seems like similar shape to the Mixed 7d saddle that I currently use. https://s.click.aliexpress.com/e/_oCkJpFx
Chinese Carbon MTB Forums
News:
Happy Holidays!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Component Deals & Selection / Re: Narrow saddles
« on: October 22, 2024, 10:31:22 AM »
I was also looking for a 135 mm saddle but settled for this 140 mm Mixed 7d which has been great https://s.click.aliexpress.com/e/_EyOPbSp
3
Cyclocross Frames, Wheels & Components / CSC Gravel wheelset - advice needed on rim depth
« on: February 10, 2024, 01:50:11 PM »
Hi all,
I’m looking at these CSC gravel wheels but I can’t decide whether to got the 40x30mm or 35x28mm rim. So basically 23 vs 21mm internal width.
https://www.aliexpress.us/item/1005006281662446.html
I run 40mm wide tires but want to keep options open for tyre sizes between 28 and 45mm. I mostly ride smooth gravel with occasional rocky single tracks. Not looking for aero gains but some weight savings conpared to old Mavic Allroad alloy wheels.
The trend seems to favor wider rims but I feel like 21mm internal might be sufficient.
Any comments are appreciated! Also in general wrt these CSC wheels.
I’m looking at these CSC gravel wheels but I can’t decide whether to got the 40x30mm or 35x28mm rim. So basically 23 vs 21mm internal width.
https://www.aliexpress.us/item/1005006281662446.html
I run 40mm wide tires but want to keep options open for tyre sizes between 28 and 45mm. I mostly ride smooth gravel with occasional rocky single tracks. Not looking for aero gains but some weight savings conpared to old Mavic Allroad alloy wheels.
The trend seems to favor wider rims but I feel like 21mm internal might be sufficient.
Any comments are appreciated! Also in general wrt these CSC wheels.
4
Component Deals & Selection / Re: ZRace Disc Brakes
« on: August 25, 2023, 12:51:36 PM »
Which brake pads is everyone using with their BR-05? I’m currently using the green Soocent ceramic ones which have been good when dry but sometimes a bit noisy when wet. I need to change the pads soon and was thinking if there are better options available.
5
Cyclocross Frames, Wheels & Components / Re: Chasing wind-GT20 OR Airwolf YFR045 carbon Gravel frames , any experience ?
« on: May 27, 2023, 08:06:10 AM »
Here’s a picture of my finished bike. Steerer tube will be cut once I’m certain about the cockpit position. I’ve ridden around 500 km and am very pleased with the frame, no issues while building either. Mechanical Apex groupset and Mavic Allroad wheels came from my previous bike, rest of the parts are from Aliexpress.
6
Component Deals & Selection / Re: chinese carbon saddles
« on: May 27, 2023, 07:52:13 AM »
I’ve had the 7D on my gravel bike for around a year, so far it’s been solid. I bought it since it was one of the only ones I could find in 140 mm wide.
7
Cyclocross Frames, Wheels & Components / Re: Scratch in carbon fork
« on: April 27, 2023, 07:09:51 AM »
Thank you for replies, that’s great news!
8
Cyclocross Frames, Wheels & Components / Scratch in carbon fork
« on: April 26, 2023, 02:49:13 AM »
Hi all,
I was careless while packing bikes onto a car rack and as a result something rubbed into the carbon fork of my CWind gravel. The scratch is about 10mm long and 3 mm wide. It’s through the paint, I don’t have a caliper but would estimated that it’s around 0.1mm deep.
My initial thought was that it’s mainly cosmetic, but your opinions are much appreciated!
Br,
Juha
I was careless while packing bikes onto a car rack and as a result something rubbed into the carbon fork of my CWind gravel. The scratch is about 10mm long and 3 mm wide. It’s through the paint, I don’t have a caliper but would estimated that it’s around 0.1mm deep.
My initial thought was that it’s mainly cosmetic, but your opinions are much appreciated!
Br,
Juha
9
Cyclocross Frames, Wheels & Components / Re: Chasing wind-GT20 OR Airwolf YFR045 carbon Gravel frames , any experience ?
« on: December 13, 2022, 01:56:07 AM »
I noticed that Cwind now offers the GT20 with a T47 bottom bracket https://www.aliexpress.com/item/1005004927226677.html. I ordered one, expected to arrive in late Jan.
Pages: [1]