Tavelo rise handlebar coming soon
https://www.instagram.com/p/DThqyefFYo3/?img_index=4&igsh=aXpwd25iYmc4YnJl

Quote from: Stephiso on May 17, 2024, 09:51:35 AM
Thanks for the explanation. With integrated headset, is there a way to install this spacer without having to undo all my hydraulic cables?

I installed without undoing my Force AXS hydraulic cables

Quote from: TidyDinosaur on May 17, 2024, 06:42:21 AM
What did you do with the round tab in the top cover that fits into the hole on the compression ring? This is where the spacer would be, is it not?

Up to down:
Steerer tube/stem cap
Stem
Spacers
Cover
Spacer
C-ring
Bearing

Quote from: Stephiso on May 16, 2024, 12:23:38 PM
^Nice,
I'm sort of new to building bikes...

Can you explain how does adding an extra spacer will resolve the headset play? Also where did you purchase the spacer from?


On my end, i did the same as TinyDinosaur and it seems to have worked for 1 ride. Will continue on a few other rides and report back.


Thanks

Just a regular round spacer/washer/ring, whatever you want to call it (see picture).
As I said, i think that 0.5 would be enough, and searching for thinner spacers I found this from FSA https://www.tradeinn.com/bikeinn/en/fsa-spacers-kit/138244357/p
look at the description:
"Integrated headsets sometimes require micro-spacers to adjust the depth of the machined headtube in order to ensure correct fit. Micro-spacers should be used between the top cover and compression ring to make sure the top cover does not contact the top of the headtube."
That's exactly what I did, so, from this description, I assume that this is not a problem of this particular Hygge's frames, it's a common issue. Also I just realized that is enough to install the ring as it comes, not necessary to cut it into a C shape. I'll try some day which thickness is the perfect one, for now I'll stay with the 1mm as it works.

Hello, I fixed the headset play simply adding a 1mm headset spacer (cutting it to a C shape) above the C ring, I think a 0.5mm would be enough but i don't have anyone right now. C-ring I'm using is this one a had around. Expander I'm using is Deda Expander 70,very stiff and light, those AliExpress expanders with O-rings or springs doesn't convince me. also I'm not using the Hygge handlebar, Og-evkin one instead.
There's no play at all, I filled the tiny gap (smaller than the one at the bottom of the head tube) with grease to avoid dust and water ingress. Expander is tighten to the Deda's recommended 5Nm and stem bolts also 5Nm.

Quote from: laktattausch on January 08, 2024, 03:11:56 AM
Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

Aren't those headset bearings 8mm height? I've measured the ones included by Hygge and they are 6.5mm

Speedplay Comp pedals + Titanium upgrade kit (
https://a.aliexpress.com/_EG9zrtj) ~150g
Which carbon clamp did you get? I bought this one but the bottom part don't fit properly the gap of the seatpost

Quote from: Okay on November 03, 2023, 12:33:11 AM
My build came out at 6.75 kg without handlebar tape. I've already ordered a seatpost clamp «upgrade» from Elita One , so we'll see what I can do to break the 6.8 kg limit.

Do you have link for the clamp upgrade? The one I found won't fit because are M5 x35 bolts and Hygge seatpost uses M6x40 bolts

Probably there will be at least 100$ coupons for these range of prices on the 11.11 sales.
Today, after 40 days, finally arrived my frameset (ordered without handlebar). No logo carbon black size L frame weighs 1023g. Great weight. Wheelset is also from AliExpress: Elitewheels Edge 45mm depth.
I'll build the bicycle in the next weeks, I still have to buy crankset, cassette, chain, handlebar tape and tyres. With SRAM Force AXS groupset (Red crankset and cassette) I hope to be in the sub 7.5kg category.

1st of october is China's National day, holidays lasts  this whole week. Many sellers raise the prices to not bother them buying their products

Real tyre clearance is 30 or 32?

Quote from: Dmgreen13 on September 04, 2023, 07:29:30 PM
I've ordered one of these framesets to build up with LTwoo electronic 12 speed as my second road disc brake bike. Currently says has been shipped.  Once received I'll post about how it looks and critical areas such as steerer, bottom bracket and derailleur hanger.

I didn't think much about warranty as not sure on how much anything from Ali express would be honoured.

I'll be able to compare this against my current model Orbea Orca aero di2, and my older BH G6 and Orbea Orca both rim brake.

When did you buy it? I'm still waiting since 21st august and is full black, so painting should be the reason...

Quote from: TidyDinosaur on August 31, 2023, 01:19:37 AM
I haven't done much km's on the bike but have done a 90km (flat) ride sunday.

The bike performs good and I don't really have complaints. I find the ride to be a little to harsh though. I think the frame and the handlebars are a lot stiffer than my previous TFSA frame (Wheels and tires are the same). I actually preferred the TFSA frame for the comfort. In a weird way I even like the look of the TFSA frame better (I have it on my indoor trainer now). The Hygge frame looks great, but I like the simple look of the TFSA (Tarmac SL6 clone).

I also still have heel strikes on the chainstays with this frame, even with the 5mm longer pedal axles, 1mm extra pedal spacer and I adjusted my cleats to have my heels further outward (not great for my knees I think).
I also regret getting a frame that has no 0-setback seatpost option... None of the carbon saddles have rails that are far enough to the back for them to fit for me.

So there is nothing wrong with the frame, but if I would have to choose again now, I think I would order the TFSA SL7 clone or the identical Delihea Tank Machine. Prices are about the same as the Hygge Model S and Delihea has some nice simple paint schemes.

Repente Magnet and all SMP saddles have 80mm long rails, Ergon and the other models of Repente/Leonardi are 70mm and Selle Italia some models like Flite Boost are 75mm long

Quote from: TidyDinosaur on August 21, 2023, 06:01:13 AM
Nice, keep us updated! Did you really get a 70€ coupon? Where did you find that?

Plenty of discounts and discount codes this week in AliExpress

Just bought the full black no logo and without handlebar. They discounted 60$ for that. Plus the 70€ code of the Back to school sales, I paid 468€.