Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Davide Panzeri

Pages: [1] 2
1
Road Bike Frames, Wheels & Components / Re: XM Carbonspeed CS-R06
« on: April 27, 2026, 09:06:35 AM »
Hi,
After purchasing the CS-R01 frame from Carbon Speed ​​and assembling my new bike with great satisfaction (I didn't choose particularly lightweight components for budget reasons, but I still managed to get it down to 7.6 kg), I'd now like to purchase the R06 frame from XMCS to build a bike for my daughter.

I decided to stick with Carbon Speed ​​because I liked the CS-R01, which I found well-built, and I'd prefer not to have any problems with my next build.

However, I can't find any reviews on the CS-R06 on the forum:
Has anyone purchased it and can kindly share their experience?

Thanks,
Davide

2
Component Deals & Selection / Re: Chinese indoor trainer
« on: April 23, 2026, 08:56:00 AM »
Hi,
Thanks for your reply.

I'm trying to connect it with mywhoosh.
Hi

3
Component Deals & Selection / Re: Chinese indoor trainer
« on: April 23, 2026, 12:14:35 AM »
Hi,
I purchased the ThinkRider XXPRO interactive home trainer.
It's my first experience with home trainers.

I wanted to ask your opinion.
I can't figure out if it's normal and correct for the pedaling to feel very hard and resistant; for example, I struggle to get the 50/11 gear ratio to turn, and even with a more agile gear, such as a 34t chainring, it doesn't seem so easy.

Can you please tell me if the feeling is correct or not, and how I can fix it?
Thank you.

4
Road Bike Frames, Wheels & Components / Re: [GIVEAWAY] Participate for Free! 3 Lucky Cyclists to Win XOSS G3 GPS Bike Compu
« on: March 12, 2026, 10:15:10 AM »
Ciao
mi piacerebbe vincerlo
grazie

5
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: October 06, 2025, 03:06:38 PM »
Hi,
thanks,
I got the non-stacked one.
Where did you get the stacked one and what model is it?
Thanks.
Hi

6
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: October 05, 2025, 01:06:16 AM »
hi
 :)

Perhaps with some photos my request for help will be clearer ;D

Today I started assembling the CS-R01 frame I purchased in June.
I have this problem and hope you can help me.
In addition to the frame, I also purchased the handlebars and headset from Peter.
The ring that passes over the bearing and holds the hydraulic brake lines (photo 1) doesn't seem to fit into the bearing if I run the cables through the appropriate slots (photo 2).

It creates a greater thickness, or diameter, that prevents installation.
I'm forced to run them inside the ring, but this seems to affect the fork's movement (photo 3).

The fork rotates fine to the right, but remains forced and "restrained" to the left.
I've tried a lot, but the final result is as described.

Do you have any solutions?
Thanks for any help you can give.
Bye.

7
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: October 04, 2025, 06:38:01 AM »
Hi,
I need a favor.
Today I started assembling the CS-R01 frame I purchased in June.
I have this problem and hope you can help me.
Along with the frame, I also purchased the handlebars and headset from Peter.
The ring that goes above the bearing and holds the hydraulic brake hoses doesn't seem to fit into the bearing if I route the cables through the designated slots.
It creates a greater thickness, or diameter, that prevents installation.
I'm forced to pass them inside the ring, but this seems to affect the fork's movement.

Any solutions?
Thanks for any help you can give me.
Bye

8
Component Deals & Selection / Re: Aliexpress BH90 compatible brake hose
« on: September 17, 2025, 01:39:29 AM »
Buongiorno a tutti.

Ho ordinato questi tubi per freni idraulici (Shimano 105 12 velocità Di2).
https://it.aliexpress.com/item/1005007090191801.html?spm=a2g0o.order_list.order_list_main.11.3a903696lAB1t9&tblci=GiATyNuZ97LzOk3RuLsw9eQGuPfXmc2EjXkVosAfqTlLCSDA9m4or8CawNHT-JwTMOTOPQ&gatewayAdapt=glo2ita

Sono però un po' titubante nell'usarli, visto il loro basso costo.
Avete esperienza con questo o un prodotto simile?
Li usereste?
Grazie.

dp

9
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: September 11, 2025, 12:28:32 AM »
Quote from: Rebel_Yell on September 10, 2025, 01:22:31 PM
Have you gotten your bike built? Wondering about a pic and an update on your opinion of the frame/bike.

Thanks

Hi,
unfortunately, I haven't started yet.
I'll definitely keep you updated.
Thanks.

10
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: August 30, 2025, 09:29:55 AM »
Quote from: azgul on August 30, 2025, 01:20:28 AM
How thick is the lip of the expander plug?

3,26 mm

Tanks

11
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: August 30, 2025, 01:00:16 AM »
Good morning,
I need a favor.

I'm starting to assemble my CS-R01.
I purchased the "integrated" handlebar with the frame.

I've determined the exact height at which to mount the handlebars.
My question concerns cutting the "fork."

Should I cut it at the level of the handlebar stem or a few millimeters lower (3 mm)?

Thanks
David

12
Road Bike Frames, Wheels & Components / Re: Chinertown Giveaway - Win the TIDEACE FM-CR068 Carbon Road Frame!
« on: August 18, 2025, 11:57:31 PM »
Tideacebike

13
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: August 09, 2025, 01:01:36 AM »
Quote from: biceryder on August 08, 2025, 04:36:17 PM
2) goes on top of the headset bearing.
5) should sit on top with a 1-2 mm gap
3) use as many spacers as required
6/5) I don’t have an XM one piece bar but my guess is 6.  do a test fit and see how they mate together before running your cables.

Thank you
really very kind and knowledgeable
Thank you

14
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: August 08, 2025, 08:24:36 AM »
Quote from: biceryder on August 08, 2025, 12:48:25 AM
What kind of cockpit are you using, one piece or separate bar and stem?  What brand?  Did you get order bars through XMC?

You were provided two different top caps and two different transition spacers. One combination allows for full internal routing, the other is for semi-integrated routing.

Your second post: Those are rubber grommets for Di2 cables exiting the frame. Not sure what the third piece is.

Hi,
thanks for your reply.
I bought the one-piece handlebar from xcarbon.
So what should I do?
Thanks.

15
Road Bike Frames, Wheels & Components / Re: Xmcarbonspeed CS-R01 build
« on: August 08, 2025, 12:22:25 AM »
Hi,
I need another favor.
Can you explain to me what these pieces are
Thanks.

Pages: [1] 2