Quote from: jannmayer on September 30, 2023, 01:37:08 AM
I ordered a plain matte finish, if that is what you are curious about. It was pretty much flat black with very little (if any) carbon texture visible.

looks like mine :-)

ordered the matte as well . it seems like it has a layer of black primer or color under  the matte clearcoat.  Im looking for frame with clear primer and gloss so you can see the fiber

Hi
Anyone having picture on a carbonda cfr707 that is only clearcoated ( so you can see the carbonfiber )

Quote from: carbonazza on August 30, 2023, 12:53:24 PM
When you don't put a spacer below the caliper, you can put a 140mm disc on road/gravel bikes usually.
Here it is 160mm by default. 180mm if you put the usual spacer to go 140 to 160mm.

so if i use no adapter at all i should have 160mm rotors ( and flat mount brakes) on the cfr707

Quote from: coffeebreak on August 30, 2023, 12:56:02 PM
Before you do that, check if the rear triangle is tall enough to mount FM-PM adapter+post mount caliper. I had TRP Hy/Rd post mount calipers and they won't fit on my frame. Later on I found that many other frames have this problem because of dropped seat stays and manufacturers really want you to use native flat mount calipers. Some post mount calipers might fit worth doing a research before hand.

ok thx. i guess if they don´t fit i have to upgrade the brakes as well . (maybe i found a "reason" to upgrade to axs... :-) ) 

i guess my sram rival hydraulic brakes looks a bit smaller (lower) than a trp hy/rd brake . ok we will see

if i want to use my current post mount brakes on the carbonda cfr707 frame and use a 140mm adapter what size do i need on the rotors ? 140mm? I read something about min diam on the frame is 160mm