Is it worth to sell my "old" Frame (3000 kilometers) and buy a new one with EPS Mould Technology? 

Quote from: BAR on July 22, 2024, 10:19:05 AM
@laktattausch what about matte paint, is it easy to scratch or the rest of drink/sweat is super visible on it?

Yes, sure this is visible on a matte paint but I clean up my bike after every ride. The glossy decals are very fragile and scratchable and you have to be careful. I like the look of the black/glossy finish especially in combination with the glossy wheelset, but if I could choose again I would take another color which is not too sensitive.

Quote from: Lotnik on July 22, 2024, 07:45:38 AM
I see that you have Avian Canary integrated bar and stem. What adapter did you use to match the frame?

I have used the Standard OD1 Version with no Frame specific Adapter/Spacer Set. And I use the FSA Superlight M110R Headset Bearings.

Mine is 6975 Grams including 2 Fidlock Bottle Mounts, 1 Wahoo Mount and 2 Pedals (without Bottles, Light and Wahoo)

Mine also with Elite Drive. First 500km with the bike were satisfying

I think they did a new fork design with changeable inserts. Picture from their last Facebook post:

Bike is ready - first ride tomorrow. 

Weight including pedals, Wahoo-mount and Fidlock-Holders (without bottles).

Quote from: joegal on January 09, 2024, 06:36:28 AM
You could save about 15 gramms on that ZTTO Foam Hose Liner.
The Blue Capgo anti-vibration foam (https://www.bike-components.de/de/capgo/Noise-Protection-Schaumstoffhuelle-fuer-Bremszugaussenhuelle-p60382/?o=502308-blau-2-m) is a lot lighter. It weighs about 1.5 Gramms per meter.

Sorry for making you rip apart your bike again Nice build tho!

Thanks for your tip on the foam. I think I will change it when I have to change the bearings in the future. Only for that few Gramms that's too much work 

That was no problem. They sit pretty close in the frame. I had to grind the center ring which was delivered with the Avian handlebar 2 Millimeters. But that's no problem because the material is 3D printed plastic. All sits pretty snug and there is no play in the headset.

Simply a piece of foam the frame was wrapped in

I thought about this but these gramm-savings are not in relation to the performance lost in my opinion. Maybe change to DuraAce Cassette but this is a too expensive wearing part. I am riding ZTTO Cassette on my 11-speed 105 bike with no problems (done Paris-Brest-Paris with this) but for 12 Speed and Di2 the opinions are divided.

I had to combine 2 clamps.

Buttom of this: https://de.aliexpress.com/item/1005005134477962.html?spm=a2g0o.order_list.order_list_main.29.37295c5f1YBCFA&gatewayAdapt=glo2deu
Top of this: https://de.aliexpress.com/item/1005005284645155.html?spm=a2g0o.order_list.order_list_main.23.37295c5f1YBCFA&gatewayAdapt=glo2deu

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

This one is with M6 Bolts, i ordered one but don't know if it will fit:
https://aliexpress.com/item/1005005284645155.html

There is a Di2 Grommet for the SL7 seatpost - I ordered this and will try if it fits for the hygge seatpost.

Also I found SL7 seatposts with less offset on aliexpress - but I don't know if they will fit:

https://aliexpress.com/item/1005004458997659.html
https://aliexpress.com/item/1005005633578007.html