I have 2 iGS630s.  I went into the sensor detection screen (Shifter) and tried for about 1/2 an hour to try to get my 630 to link/recognize/do something.  All it did was non stop "Searching"   I tried on 3 different EDS derailleurs and the 630 didn't find any of the derailleurs.

I turned on my Wheeltop app and linked to the derailleurs hoping the 630 might pair with the phone or derailleur.
I opened my iGS630 app on my phone to see if there was anything in the app I could use to link/find my EDS derailleurs. (Nothing.)

Edit:  I do not see EDS/Wheeltop listed in the advanced features for the iGS630. 
Edit 3/26/24   This is what IGSport wrote me when I asked if the 630 works with EDS:

Thank you for writing to us.
 
The compatibility with Wheeltop EDS OX  and TX is decided by the functionality of both devices.
To confirm the compatibility with the shifter, please search from the bike computers directly.
They will be not compatible if the shifter can't be searched by the bike computer.
If you have any further questions, please don't hesitate to contact us.
 
Best Regards,
 Customer Service Team

(Since my 630 searched without finding the EDS derailleur, I take it that it does not support the Wheeltop EDS derailleur, and I doubt the new 800 supports EDS either.)

Thoughts?

I just connected the IGS800 to the Wheeltop EDS TX pretty easily.  Only thing is the ways the gears are listed is backwards (same as the app).

So, I received the Wheeltop EDS TX groupset from AliExpress and naturally I’ve run into issues. Maybe someone here can help. After following the instructions for pairing and connection to the app, neither has happened. The derailleurs are to be connected to a power source then removed (rear first then front) and the lights will both blink blue. The issue I have is the RD light starts blue then turns green and stays green as opposed to blink green then flash blue. The FD blinks blue (ready to pair) but no pairing will happen because the RD stays green. I’ve contacted Wheeltop and they’ve sent the pairing video and told me “it needs connected.”  Anyone have the same issue?