Quote from: Requiem84 on October 07, 2026, 05:25:41 AM
Best to contact one of their sales reps via whatsapp amd then customize your order. I only sell complete xmcs bikes. Option 2 is xmcsbelgium, he does sell frames and wheels. But not from stock, everything directly shipped from Xmcs.

Raw carbon is possible indeed.

could you pass me their contacts?
Thanks

Hi all

This frame looks appaling. What would be the best process to order it? Through their own website?
Do they sell somewhere else?
Do you know if they sell frame in raw ready for painting?

Thanks in advance

I can also put what I have finally use.

I bought the Lexon integrated gravel handlebar and ended up using the aluminum compresion ring that comes from the frameset supplier and a sealing from Acros to properly seal in vertical direction against the frame. The seal that comes by default was leaving the handlebar touching the frameset (not a good idea)

LEXON UNOX 28,6 mm T1000 Gravel Bar + Acros fork cone IS52 + Aluminium compression ring from Mondince

Still the result is not super optimal but was the way to make it work without having to sacrifice the handlebra

Also now that we talk about headset-stem combo. This is probably the weakest part of the assembly.

Can we between all of us elaborate a list of possible headset stem combination that works and fit well? On my side I had to do magic at the end to install the Lexon with the headset included.
What do you think?

Chinese just want to sell. They will admit failures if you can show to them. Do not expect he is going to tell you all the issues. Also he blamed on his former coworkers, he said not reliable enough but this is an issue in whole china, so I dont blame him back for it.

For me it is very important that before the shipping you guys get a video and a final check of everything before packaging preparation. If not push for it, he wil not have any problem in share it. Also ask for him to check all the screws, he did not check mine and I have a defective one in top tube, I asked back for money and he supported me.

Hi all

I am wondering where I could find this frame or its specs.
Since MMR is a brand who has been working with our chinese suppliers, like Speeder Cycling, maybe someone knows from which manufacturer could be this one this time?

sorry my bad, wrong thread

Hi all

I am wondering where I could find this frame or its specs.
Since MMR is a brand who has been working with our chinese suppliers, like speeder cycling, maybe someone knows from which manufacturer could be this one this time.

Quote from: alfiomotrambo on July 10, 2026, 01:30:59 PM
https://chinertown.com/index.php/topic,7274.0.html

Thanks, did not know there was a thread already

Quote from: freddy_the_main on July 10, 2026, 10:50:53 AM
Thats the spect mira. It already has a thread in this forum which is wort checking out.

Btw where is the picture from?

I friend sent it to me

Quote from: Lotnik on July 11, 2026, 09:17:44 AM
My build is finally done. 

Assembly went quite smooth. Brake mounts wasn't finished well and paint on the furry in this place was a bit chipped. I gave up with XG4 calipers as they barely worked on the front and didn't work at all in the rear no matter how long I bled them.

Only issue I have now that the storage cover feel of two times during a ride with a bottle and copied paint 🫤. I don't know what going on with it. I tapped it for a now. Does anybody have same issue?

Spec:
FM 336 size L
CSC wheels 29int/34ext 45 mm deep
Panaracer Gravelking ZX 50 mm front / 45 mm rear
Shimano 105 shifters and brake calipers
Shimano GRX RX822
Shimano SLX 7100 cassette 10-51
Kocevlo bar and stem combo
Mixed saddle
Total weight 9kg

(Flat pedals are temporary. I took for a ride with my son as he was racing today)

The other day I did almost and enduro route with the bike, storage cover rocket solid. No issue at all. I onle have had an issue with one of the two top screws made for the top tube bags because it is loose.  I will have to apply loctite or something similar to fix it.

Hi all

Do you know which frameset is this one? I really like the geometry and wondering where could I find it.

Quote from: CycOps on July 01, 2026, 01:38:49 AM
@MF_One
Upgrades are always nice, but are you having any problems with your headset? My stock headset from Mondince has been working flawlessly with zero issues so far.

I do not like the cover they provided for the cable routing, also the compression ring is not the best. Bearing so far no issue, but I would like to change for the Acros one that is well sealed against dust and humidity.

I am planning to improve a bit the headset kit from what it comes from manufacturer.
Can someone maybe help me with that?

Specs are:
Headtube:   1-1/2" Upper and Lower (Integrated); 52mm ID, 56mm OD
Bearing Size:   52mm OD, 40mm ID Upper And Lower; 7mm Height Upper, 7mm Height Lower

Does it mean I cam buy the following from Acros (for instance) and improve the assembly?
IS52 lower part 48.02.601R2S‑1.5
IS52 upper part ICR 48.02.610R1S
ICR compression ring (aluminium) 11.02.092‑AM
ICR headset cover 24.52.113-OD56-AM

Would that be compatible? All of them are for IS52 sstandard

Quote from: Ducke on June 29, 2026, 08:36:30 AM
Hey guys, just finished two builds on this frame, both are size M, weight is just below 9 kg with pedals, really happy with it.

I just have a small issue with the magnetic downtube storage cover, as it comes off really easily, it came off with 0,5 l bottle when hitting a small bump at moderate speed. I was wondering if anyone else had this problem?

No issue with the magnet, today I rode with 0.75L bottle and made its job. Way was a bumpy one, actually some water went oout due to vibration but it worked.

I wanted to ask you which handlebar and stem have you mounted. I am thinking in building a second one for my wife and it seems to be a good choice. Thanks