LCFS911 full suspension

[Jeroen]

OMG. That's certainly not something anyone would like to see happening! I feel sorry. Not a good Christmas. Let us know how lightcarbon reacts.... in the meantime to your question: depends on the carbon specialist you can find, but it sure looks tricky to repair.
Good luck!

[turmukhambetov]

I have just received an email from Wendy, they will send in a new front triangle. Top class. To be honest I wasn’t really worried.

[Jeroen]

Very re assuring to know, thanks! Wishing you lots of fun rebuilding and all the best for the New Year!

[rasputero]

Hello, I've bought one of these frames and it will be my first full suspension build. Now I am buying all the things I need.
I am looking for a set of second hand brakes, but I wonder which is the hose length I need. The frame is size L, so if any of you have this size, could you please tell me the length of both hoses?
I promise post the full build.
Thank you very much!

[acedeuce802]

I've got a size large, feel free to PM me this weekend if I forget to measure my hoses.

[acedeuce802]

I've got Formula Cura brakes on 740mm bars, 100mm SID fork, and run my hoses pretty tight to the head tube. They measure 28" front and 59.5" rear.

[rasputero]

I've got Formula Cura brakes on 740mm bars, 100mm SID fork, and run my hoses pretty tight to the head tube. They measure 28" front and 59.5" rear.

Thank you! I'm planning to buy a 740mm handlebar too. What stem length have you bought?
Thanks.

[acedeuce802]

Mine is a 70mm

[rasputero]

Hello,  I am building my LCFS911 and the chainring hit the frame... It is an 34T oval rotor. Anyone is using an oval 34T?
I bought a Xtr bb but haven't installed the spacer... I think it isn't necessary with 92mm length.

[Draz]

That frame is 34T compatible but, 34T oval chainring usually have the ovality of 32T-36T. So you are exceeding the max chainring size. If you install spacer to BB just make sure your bb shell has enough width. Problem is your chainline will change in favor to harder gears. Easier gears, big cogs will be harder to achieve. Obviously this is for 1x set up.

[Draz]

I forget to mention about the crank installation issue as well, you will have less interface for crankshaft to screw in.

[rasputero]

I think I will return the chainring and buy a standard 34

[Draz]

That seems to be the best choice, you can also install oval chainring 32T. Just check the maximum ovality of the chainring. However, I would stick with the normal chainring tho, that seems to be easy on rear derailleur, clutch system.

[turmukhambetov]

Hi all, has anyone serviced or replaced pivot bearings on this frame? Anything to keep in mind? Is this an easy or difficult procedure to attempt? Thanks for any thoughts on the matter.

[JimLee]

Use the email box when you purchase the frame, and leave a message on our website or send mail to the salesman which you contact. If you can find the original proforma invoice, it's more better,  The salesman will ask you to take some photos. Everything is simple.