Author Topic: Carbonda FM909  (Read 162450 times)

azuzu501

Re: Carbonda FM909
« Reply #330 on: February 28, 2022, 05:48:38 AM »
Does anyone have a diagram of how the headset goes together? Is the top bearing, then that half circle thing, then the top cap and washer? That leaves a hole…

Here is what I have, it might help
https://drive.google.com/file/d/1efhJO-i8EN0S8In9NDSyX2CaNkqmyxWz/view?usp=sharing

C4rbon

Re: Carbonda FM909
« Reply #331 on: February 28, 2022, 10:52:42 AM »
Thanks, that helps. I really want to work out how to make the top cap flush with the frame (no gaps). I feel like if I put the one that came with it  in it will sit up. Saw a guy on here got his flush. Will have to break out the calipers and do some measurements I guess… hope I am worried about nothing and will just work.

On another note the build is coming along well but managed to chip the paint on the swing arm with the bottom bracket tool! Just superficial but worth a note. Very tight.

Had to remove the lower bolt on the swing arm to get the cables in (was hard). Should have done it then.

C4rbon

Re: Carbonda FM909
« Reply #332 on: February 28, 2022, 10:54:24 AM »
Nice! Thanks for the diagram.

Seba MTB

Re: Carbonda FM909
« Reply #333 on: March 01, 2022, 12:50:27 PM »
10,5 kg of beauty  :) (without pedals)

FORK
RockShox SID SL ultimate 100mm
REAR SHOCK
RockShox NUDE

DRIVETRAIN
SHIFTER
SRAM GX
REAR DERAILLEUR
SRAM GX
CRANKSET
SHIMANO SLX M7100
CASSETE
SRAM XG, 10-52T
BOTTOM BRACKET
TOKEN NINJA
CHAIN
SRAM X01 Eagle

COMPONENTS
HANDLEBAR
RACE FACE NEXT 720mm (aliexpress)
STEM
PRO KORYAK 31.8x40mm
GRIPS
PROMEND (aliexpress)
BRAKES
SHIMANO XT M8100
SADDLE
SELLE ITALIA SLR Boost TM
SEAT POST
ELITA ONE 30.9mm (aliexpress)

WHEELS
TIRES
Woolfpack race and speed
WHEELSET
Rims RM29C19 matte UD 32H Light Bicycle
Hubs Dt Swiss 350

federic000

Re: Carbonda FM909
« Reply #334 on: March 01, 2022, 02:08:27 PM »
Bellissima! Seba, how tall are you? Inseam length? Thanks

Seba MTB

Re: Carbonda FM909
« Reply #335 on: March 01, 2022, 02:30:42 PM »
Bellissima! Seba, how tall are you? Inseam length? Thanks

Thank's!
I am 175 cm tall, 85 cm inseam
« Last Edit: March 01, 2022, 02:33:53 PM by Seba MTB »

Seba MTB

Re: Carbonda FM909
« Reply #336 on: March 01, 2022, 02:38:56 PM »
Nude has 15mm cable pull. Oneloc 10mm and only two modes.
My friend did some trick, dont't exact know what (see photos), and IT works. There are only 2 positions now, open and close. That's fine with me.

federic000

Re: Carbonda FM909
« Reply #337 on: March 02, 2022, 06:52:43 AM »
Thank's!
I am 175 cm tall, 85 cm inseam


Why size L if you are 175 cm? Did carbonda suggested you? I see you have a very short stem indeed

Seba MTB

Re: Carbonda FM909
« Reply #338 on: March 02, 2022, 12:42:11 PM »

Why size L if you are 175 cm? Did carbonda suggested you? I see you have a very short stem indeed
Geometry of my hardtail, M size:
https://superiorbikes.com/pl/2018/mtb-race/xp-979/matte-petrol-blue-black-neon-red
Look at attached photos:
Hardtail from middle of saddle to end of steem is 70cm
Carbonda from middle of saddle to end of steem is 66cm.
Saddle on carbonda is 2cm lower than in hardtail. When i will even them, i think it will be the same, about 70cm
So for me L size is ok

federic000

Re: Carbonda FM909
« Reply #339 on: March 02, 2022, 01:53:21 PM »
Thanks Seba, what a change from the Superior to this one isn't?  :D :D

lukwy

Re: Carbonda FM909
« Reply #340 on: March 02, 2022, 02:32:27 PM »
My friend did some trick, dont't exact know what (see photos), and IT works. There are only 2 positions now, open and close. That's fine with me.

That looks promising. Please ask your colleague how he managed to adjust the rear shock (15mm cable pull) with the OneLoc shifter.
FS: Carbonda FM936, XT/SLX 1x12, 2.4
Gravel: TanTan GR045, GRX820/105 2x12, 700x35c

Seba MTB

Re: Carbonda FM909
« Reply #341 on: March 02, 2022, 03:11:38 PM »
That looks promising. Please ask your colleague how he managed to adjust the rear shock (15mm cable pull) with the OneLoc shifter.
I think he used this:
https://www.amazon.com/SRAM-Compact-Inline-Barrel-Adjuster/dp/B008OR4TZI
Will ask him on sunday

Seba MTB

Re: Carbonda FM909
« Reply #342 on: March 03, 2022, 01:49:27 AM »
Thanks Seba, what a change from the Superior to this one isn't?  :D :D
I'm still waiting for my first ride. I hope there will be a big difference  :)

ilyamaksimov

Re: Carbonda FM909
« Reply #343 on: March 03, 2022, 02:06:32 AM »
That looks promising. Please ask your colleague how he managed to adjust the rear shock (15mm cable pull) with the OneLoc shifter.

Apparently it was preloaded 5mm.

multig

Re: Carbonda FM909
« Reply #344 on: March 03, 2022, 03:18:12 AM »
My friend did some trick, dont't exact know what (see photos), and IT works. There are only 2 positions now, open and close. That's fine with me.
It's a usual cable tensioner, which is commonly used with dropper posts or road bikes.
Quote
Apparently it was preloaded 5mm.
Exactly))