Garmin/Wahoo Mounts from Alloy Express for Kalloy Uno Stem?

[RhubarbChrisP]

Has anyone found a quality Garmin or Wahoo style mount that works with a Kalloy Uno Stem and is available on Aliexpress?

[jonathanf2]

I use this. Also works as a small spacer between the top cap and stem.

https://www.aliexpress.us/item/3256804678954687.html

[raisinberry777]

I've ordered this - fits well but have not ridden yet:

https://a.aliexpress.com/_mr2ADl2

[hsaus]

I recently installed this mount on one of my bikes that has a Kalloy Uno stem. The mount was recommended in another thread on this forum. Seems solid, no issues so far.

https://www.aliexpress.com/item/1005003849019564.html

[PLA]

I have the og-evkin one but the inserts were shit and they crumbled on first use, I replaced them with k-edge ones, which fit perfectly.

That gub titanium mount on aliex looks nice.

[jonathanf2]

If you get an adjustable front computer mount, make sure you get one with a torx screw and not a hex screw at the adjustment point. The hex screw head is too small to handle torque and will strip. The torx screws can handle more torque and will stay in-place.

[00Garza]

Which kind are you looking for? Out front? Top cap mounted? Handlebar mounted? Faceplate mounted? Lots of options.

[RhubarbChrisP]

Probably either outfront mount or faceplate mount/using two of the faceplate bolts.

Ideally without the light/accessory attachment (or with removable light/accessory attachment) because aero.

[toxin]

I used these but i've cracked 2 mounting brackets by tightening the stem plate bolts to 5nm. https://www.aliexpress.com/item/1005007032664646.html

Ordered one of these, will see how it goes https://www.aliexpress.com/item/1005007573593744.html

both have a removable gopro mount

[Sakizashi]

@toxin Without knowing what that is made of and if the plastic material will creep, I would avoid it.

These are great,  but not on Aliexpress, so you will either need to use a service like superbuy or navigate international purchasing in the chinese version of the app: https://item.taobao.com/item.htm?id=633892271854. You want one of the last few options that specify stem angle and insert type.

[coffeebreak]

I have this on almost all bikes : https://www.aliexpress.us/item/3256803662704812.html

Excellent so far and even fit onto extra wide FSA SMR stem.

[toxin]

problem with a bunch of these is there is no angle adjustment

[coffeebreak]

Cheap ones with angle adjustment always buckle under the weight of the computer and light. Fixed angled mounts for me forever.

[toxin]

Well not all of us have a stem angle that allows that

[jonathanf2]

As I mentioned earlier in this thread, the torx screw computer mounts handle load much better. Also adjustable front mounts are necessary on anything with -/+ 17 degree stems. Non-adjustable mounts will point awkwardly up or down with those stems.

I can't find the one I'm using on AliEx, but here's the link on US Amazon:
https://www.amazon.com/gp/product/B0CP2MC6NH