Xiamen Carbon Speed 2025 new carbon crankset

[PeterXu]

165mm 24mm titanium spindle crankset.

[pandinoyoung]

165mm 24mm titanium spindle crankset.

I'm interested in the crankset, but I can't find it on the site and I don't understand what the price is. It's cryptic

[PeterXu]

I'm interested in the crankset, but I can't find it on the site and I don't understand what the price is. It's cryptic

230 USD/ set for 29mm DUB aluminum spindle version, 310 USD/ set for 24mm titanium spindle version

Actually I should have mentioned the pricing couple of months ago.

[bichler.bua]

Would you remind us of the crank length, again?
Are you offering 175mm or do you have plans to do so?

[JMOS]

165mm 24mm titanium spindle crankset.

I noticed these cranks also have a “shoulder” where the spindle attaches to them. Is there a reason for that? On my lexon cranks that shoulder causes a significant gap between cranks and spider/chainrings and is also the reason why the chainrings sit very close to the frame, making it difficult to set up the di2 front mech properly.

https://chinertown.com/index.php/topic,4834.285.html

[Sander2177]

I noticed these cranks also have a “shoulder” where the spindle attaches to them. Is there a reason for that? On my lexon cranks that shoulder causes a significant gap between cranks and spider/chainrings and is also the reason why the chainrings sit very close to the frame, making it difficult to set up the di2 front mech properly.

https://chinertown.com/index.php/topic,4834.285.html

The spider supplied with the XM crank is recessed to allow it to go round the shoulder.
Have you the correct spider type

[JMOS]

The spider supplied with the XM crank is recessed to allow it to go round the shoulder.
Have you the correct spider type

Thank you! I am using the spider supplied with the Lexon cranks. A recessed spider would probably solve my issue. Do you know where to get an alloy one? Sorry for getting OT

[Pkd17]

Did you even check the product page?
Says there:
q-factor:149/151mm

Mabye I am blind, but I have not seen any product page.

[Tines]

No I was probably very confused.

[RDY]

@Peter

Any chance of an MTB version, ideally in 8 bolt?

[BikeLab]

230 USD/ set for 29mm DUB aluminum spindle version, 310 USD/ set for 24mm titanium spindle version

Actually I should have mentioned the pricing couple of months ago.

Peter, what is spindle lenght for 24mm and DUB?

[PeterXu]

Now we have all 155/165/170mm carbon cranksets in both 29mm DUB aluminum and 24mm titanium versions availble in stock, all sizes chainrings too.

[Bobinski]

Peter, do you have 1x chain rings for an XPLR set up?

[Sander2177]

For anyone considering chainrings from XM Carbon — I’ve had two sets arrive: a 52/36T and a 53/39T.

I didn’t buy both — XM accidentally sent the 52/36T in error. But to be fair, they responded quickly and sorted it out. The correct 53/39T set arrived today, and the 52/36T was delivered on Monday.
Side by side comparison to the Cybrei rings will post pics when I fit to my DFS Carbon crank with complete weight

[Sander2177]

.