Author Topic: Dengfu R12/13 Frame Torque Settings  (Read 315 times)

quarkrad

Dengfu R12/13 Frame Torque Settings
« on: January 23, 2025, 03:34:15 AM »
I'm in the process of building a R13 based road bike - emailed Dengfu but they are on a Chinese Holiday.  I'm missing the torque settings for the Seat Post Wedge and two for the steerer tube Compression Plug and Top Cap (HB015 integrated handlebars).  If any body has put this bike together and could tell me what settings they used it would be most appreciated.



RoadieMKD

Re: Dengfu R12/13 Frame Torque Settings
« Reply #1 on: January 23, 2025, 06:15:42 AM »
These values are pretty much standard across the industry and do not vary much between manufacturers. For the seatpost wedge is 5Nm max, compression plug is 7-8 Nm, headset compression usually tighten it until no play is present and it should not be more than 2-3 Nm, stem bolts 5 Nm. Saddle clamp depending on style 5-10 Nm.

quarkrad

Re: Dengfu R12/13 Frame Torque Settings
« Reply #2 on: January 23, 2025, 07:35:30 AM »
Many thanks