Author Topic: LightCarbon LCM908  (Read 12411 times)

Nicoloc

LightCarbon LCM908
« on: October 24, 2018, 12:43:16 AM »
Hi guys
Did one of you tryed the lightcarbon LCM908?
Geometry looks to be "modern" (boost and head angle <70°).
Frame price is 375$ and shipping cost at 116 with XDB.
That put the overall cost to the lowest i've seen after searching the different conpanies.
The only thing, is i haven't found any feedback on the frame and almost nothing on the supplier.
did you ever purchase from them?
What was the quality like?
thanks for your input helping me to choose my new 29er frame (switching from my old 26")
Nicoloc



carbonazza

Re: LightCarbon LCM908
« Reply #1 on: October 24, 2018, 05:51:42 AM »
It looks good and modern indeed.
Just maybe the front derailleur routing looks a bit unusual.

For all of us, do not hesitate, go ahead and be the first ! ;)

Nicoloc

Re: LightCarbon LCM908
« Reply #2 on: December 28, 2018, 02:25:21 AM »
Hi all
I finally purchassed the frame.
It's been painted and now is in transit.
I'll let you know more when i'll receive it and when i'll know how to post pictures  :)
Nicoloc

carbonazza

Re: LightCarbon LCM908
« Reply #3 on: January 07, 2019, 02:16:02 AM »
I look forward to it.
What kind of painting did you choose ?

Nicoloc

Re: LightCarbon LCM908
« Reply #4 on: January 13, 2019, 11:55:22 AM »
Hi All
I receivefd my frame.  :)
Few question to the forum prior I start the assembly:
    Is there a specific grease to apply for the bottom bracket / frame
     Is there a specific grease to use for the integrated head set / frame
    How shoul I route my cables hoses :above or bellow the bottom bracket.


I will post picture and full configuration when I'll have my computer back running again.
Frame is beautifull black and red (I asked for the same design as the BXT)
Thx for your help

carbonazza

Re: LightCarbon LCM908
« Reply #5 on: January 14, 2019, 07:58:00 AM »
I used to buy different greases at my initial build.

Not anymore  ;) I use the Motorex the yellow one for everything.
And a marine grease(tick and sticky blue), on the headset.

I routed over the BB on almost all bikes I built.

Nicoloc

Re: LightCarbon LCM908
« Reply #6 on: January 14, 2019, 02:44:12 PM »
Compuer is back and running
So here is my config

frame: LCM908   630e   1100g
fork :   Fourche 32 FLOAT SC 29" PERFORMANCE 100mm GRIP   478e   1620g
wheel : crossmax elite 29" boost   287e   1615g
         
rear derailleur    Shimano XT shape longue    61,99   271
front derailleur    Shimano XT FD 8020 E    22,95   124
Shifter    Shimano XT  I SPECII   69,9   262
front brake    Shimano XT  M8000    78,99   296
rear brake    Shimano XT  M8000    82,99   280
crank    Shimano SLX    104,95   743
bottom bracket     Press-Fit Shimano BB94   19,99   56
Chain    Shimanon XT   28   257 
cassette    Shimano XT  11 42   58,6   445
seat post    Light carbon    0   205
handle bar Light carbon  750   0   175
stem light carbon  90 mm   0   110
grip          
tire VTT Michelin Wild Grip'R2   39,8   1320
disk brake  AR   Shimano Deore XT SM-RT76 - Disque De Frein    20,95   115
disk brake Av   Shimano Deore XT SM-RT76 - Disque De Frein    20,95   115
selle   SDG bel Air    39,9   324
various     23   
      
   
         
total 2067,96e    weight  : 9176g

Some few componments are missing but basically this is the config  :)
all parts are coming from RCZ bikes , chain reaction , all tricks , probikeshops and few from Aliexpress



emu26

Re: LightCarbon LCM908
« Reply #7 on: January 14, 2019, 03:03:32 PM »


I routed over the BB on almost all bikes I built.

This.

I don't understand why so many of the china frames have under bb routing especially with dual suspension frames. I would always choose over bb than under bb if that was the only difference between two frames.

GreyCactus

Re: LightCarbon LCM908
« Reply #8 on: July 27, 2019, 10:57:02 AM »
Compuer is back and running
So here is my config

frame: LCM908   630e   1100g
fork :   Fourche 32 FLOAT SC 29" PERFORMANCE 100mm GRIP   478e   1620g
wheel : crossmax elite 29" boost   287e   1615g
         
rear derailleur    Shimano XT shape longue    61,99   271
front derailleur    Shimano XT FD 8020 E    22,95   124
Shifter    Shimano XT  I SPECII   69,9   262
front brake    Shimano XT  M8000    78,99   296
rear brake    Shimano XT  M8000    82,99   280
crank    Shimano SLX    104,95   743
bottom bracket     Press-Fit Shimano BB94   19,99   56
Chain    Shimanon XT   28   257
cassette    Shimano XT  11 42   58,6   445
seat post    Light carbon    0   205
handle bar Light carbon  750   0   175
stem light carbon  90 mm   0   110
grip          
tire VTT Michelin Wild Grip'R2   39,8   1320
disk brake  AR   Shimano Deore XT SM-RT76 - Disque De Frein    20,95   115
disk brake Av   Shimano Deore XT SM-RT76 - Disque De Frein    20,95   115
selle   SDG bel Air    39,9   324
various     23   
      
   
         
total 2067,96e    weight  : 9176g

Some few componments are missing but basically this is the config  :)
all parts are coming from RCZ bikes , chain reaction , all tricks , probikeshops and few from Aliexpress
Any photos?

Nicoloc

Re: LightCarbon LCM908
« Reply #9 on: August 26, 2019, 02:11:01 PM »
coming soon  :)

Nicoloc

Re: LightCarbon LCM908
« Reply #10 on: August 27, 2019, 12:14:11 PM »
hi guys
Here are some pics in attachement

Nicoloc

Re: LightCarbon LCM908
« Reply #11 on: August 27, 2019, 12:18:57 PM »
some of my desapointment regarding the bike  :
All inserts are really cheap.
And if you plan to use the frame in a 2x configuration, you will find that the front derailleur fixation is very weak with a lot of play.
I've benn added some Teflon tape to compensate.

also to mention that i had to change the stem as the insert were torn...

So frame is nice but insert are extremly fragile
Nicoloc

GreyCactus

Re: LightCarbon LCM908
« Reply #12 on: August 31, 2019, 12:14:19 PM »
My frame arrived a few days ago. For now I’m building his brother lcfs713. The details in the frame are well finished, and everything is ok. A little scratches in the headtube, I hope nothing to worry.
In the next months I will to build this!

Nicoloc

Re: LightCarbon LCM908
« Reply #13 on: September 01, 2019, 06:05:41 AM »
Nice :)
Be carefull with the inserts, else it's quite nice to ride :)

GreyCactus

Re: LightCarbon LCM908
« Reply #14 on: November 18, 2019, 06:16:53 AM »
Nicoloc any new about this bike?  ;D
How do you feel the geometry?