Just placed my order for a Carbonal Orion -
http://www.carbonality.com/orion-29er-1250g.htmlI'll be stripping my existing bike this evening (On-One Lurcher) but the build of that is as follows
Forks: Niner
Stem: Thomson Elite 100x0
Bars: Ritchey Carbon
Grips: ESI Chunky
Shifter: SRAM XX
Front Brake: Hope Race Evo X2
Front Wheel: Hope Pro 2 to Stans Crest
Front Tyre: Schwalbe Rocket Ron 2.25
Seatpost: Thomson Elite
Seat: Velo
Cranks: SRAM XX1 32t
Pedals: Time Atac Alium
Rear Brake: Hope Race Evo X2
Rear Wheel: Hope Pro 2 to Stans Crest
Rear Tyre: Schwalbe Rocket Ron 2.1
Rear Mech: SRAM X0
Chain: Connex 10S8
Cassette: SRAM PG1050
Not sure what the actual weight of it is since I changed the bars and rear tyre after I did my calculations and have now removed the Reverb that was fitted but with 2.1's F&R, alloy bars and a Reverb it came in at a claimed 9140g, that was measuring all the parts during the build as opposed to the actual full bike.
The weight of the existing frame is 1575 and the claimed weight of the new one is 1250g for the 19". I've ordered the 17 so I guess it'll be a little less, maybe 1200 or so. I've removed the Reverb and gone to a Thomson which is ~300g lighter, as well as gone from Answer Pro Taper alloy bars to Ritchey WCS Low Rise which are a claimed ~60g lighter, but have swapped the front tyre from a 495g 2.1 Rocket Ron to a claimed 520g 2.25 so there could be some weight gain there.
Either way it's looking like it should drop to around 8400g, depending on the weight of the new frame. I'll leave this up as a progress report since I've not seen much chat around these frames.
UPDATE: The bike is built!The scales lack in accuracy, I weighed it three times and it came out at 8.2, 8.4 and 8.7.