Author Topic: Lightcarbon LCFS937 Build  (Read 90969 times)

StefanB

Re: Lightcarbon LCFS937 Build
« Reply #120 on: September 16, 2020, 02:02:51 AM »
Testing the parts together before I start mounting the Magura brakes, SRAM crankset and groupset.

My first ordered dropperpost was to high with 170 mm travel, so I sent it back and I have ordered a new one with 125 mm travel.

I have also ordered a new Stem Ø35mm to fit the carbon handlebar I ordered from Light Carbon. The stem I have is for  Ø31,8mm.

But so far I am very happy with how well build the frame is. The finish is good and everything fits nice in place.


carbonazza

Re: Lightcarbon LCFS937 Build
« Reply #121 on: September 16, 2020, 08:54:37 AM »
...Testing the parts together before I start mounting...

Did you order with the lettering or did you do it yourself ?
Have fun mounting it !

rubybear

Re: Lightcarbon LCFS937 Build
« Reply #122 on: September 16, 2020, 11:07:30 AM »
Also interested to know this, I have a 130-160 Pike I'm thinking of using on it.

You might be able to simulate the extra "slackness" of using a 160mm by swapping the rear wheel for a 27.5.

I'm running a Pike at 140 with debonair and I can't say it has hold me back in the technical terrain here in CO. I don't go for the biggest jumps but I do enjoy technical descends. I think someone might have run this frame with 160 over on the MTBR thread

StefanB

Re: Lightcarbon LCFS937 Build
« Reply #123 on: September 16, 2020, 11:55:45 AM »
Did you order with the lettering or did you do it yourself ?
Have fun mounting it !

I did the lettering myself. I have a hifi company, Akkelis Audio, and some customers call me Akke, so therefore the name, AKKEBIKE.  The lettering is in graphite, so with little light its almost black, in sun it shines in silver. I like it.

StefanB

Re: Lightcarbon LCFS937 Build
« Reply #124 on: September 21, 2020, 03:17:52 PM »
Now its really close. stem and bar in place, Magura MT5 brakes front and rear in place, all wires in place, shifter in place, just the cassette and chain and of course adjustment of everything. Maybe I can do my first ride soon :D


StefanB

Re: Lightcarbon LCFS937 Build
« Reply #125 on: September 24, 2020, 11:55:46 AM »
Now my LCFS958 is finished. I have made a short testride and the first impression is really great. It feel fastand smoot. Carbon frame, wheels and bar helps.

Parts used:
LCFS958 from from Light Carbon
Carbon wheel with DT Swiss 350 hubs from Light Carbon
Bar, Light Carbon Riser 20 mm
Rear shock, Rockshox Deluxe Ultimate RCT
Fork, FOX 36 Performance 140mm
Headset, KNC KHS PT
Brakes, Magura MT5
Bottom bracket and saddle, Nukeproof
Crank, shifter, cassette, derailleur, SRAM GX Eagle
Pedals, Blackspire nylotrax
Seatpost, Red Cykling dropper









MtbNewbie

Re: Lightcarbon LCFS937 Build
« Reply #126 on: September 28, 2020, 04:20:49 PM »
Greetings from USA, Please let me know what bushing kit needs to be used to fit rear shock.

I tried a 22*8 and it is too small. The spec says this the size.
At another place it says 30*8...is that the correct size?  Does the bushing fit snugly in the eyelet..I have never done this before so excuse my ignorance.

I have DPX float Fox rear 165*42.5.

Thanks

hahel

Re: Lightcarbon LCFS937 Build
« Reply #127 on: September 29, 2020, 02:49:16 AM »
Edit: Sorry wrong frame thread ;D, but my advice on measuring the internal width is still valid.

Been reading this thread in preperation for my frame to arrive, i thin the nominal with is 22,2mm, however i thin there are a few reports that it measures wider than that. There are a span of different widths of the bushing 22, 22.2, 22.8 etc i would suggest you measure the internal width of the mount on your bike and buys one that fills it out or shim it until it fits.
« Last Edit: September 29, 2020, 02:53:12 AM by hahel »

MtbNewbie

Re: Lightcarbon LCFS937 Build
« Reply #128 on: September 29, 2020, 10:38:54 AM »
Yes thanks, ordered a Fox 8*30.

https://thelostco.com/products/the-real-2021-fox-mounting-hardware

Hopefully it fits

xz01

Re: Lightcarbon LCFS937 Build
« Reply #129 on: September 30, 2020, 08:21:07 AM »
where did you read 22*8? the lightcarbon site says 30*8

rubybear

Re: Lightcarbon LCFS937 Build
« Reply #130 on: October 01, 2020, 01:49:01 PM »
I ordered a 22.0x8 mounting hardware and the fit is snug as it should on my RS super deluxe. The frame comes with shims that go on the sides of the mounting hardware. That might be the difference here. No problems on my end. The lightcarbon site is dumb. They specify a 30.0x8 but they link to a 22.0x8 mounting kit.


xz01

Re: Lightcarbon LCFS937 Build
« Reply #131 on: October 01, 2020, 10:14:08 PM »
I ordered a 22.0x8 mounting hardware and the fit is snug as it should on my RS super deluxe. The frame comes with shims that go on the sides of the mounting hardware. That might be the difference here. No problems on my end. The lightcarbon site is dumb. They specify a 30.0x8 but they link to a 22.0x8 mounting kit.

i just assumed that you were supposed to pick the 30x8mm set from that amazon link. i'll measure my frame when it arrives and report back.

MtbNewbie

Re: Lightcarbon LCFS937 Build
« Reply #132 on: October 03, 2020, 05:11:59 PM »

xz01

Re: Lightcarbon LCFS937 Build
« Reply #133 on: October 30, 2020, 08:44:26 PM »
How did you guys route the hydraulic brake lines through the frame? I just had a hell of a time with the dropper post

xz01

Re: Lightcarbon LCFS937 Build
« Reply #134 on: November 01, 2020, 09:41:32 PM »
NVM, just electric taped the hell out of the plastic guides to the hydraulic line and pushed it through