Author Topic: Carbonda Cfr 1056  (Read 118098 times)

Aesch

Re: Carbonda Cfr 1056
« Reply #90 on: May 29, 2021, 02:22:29 PM »
Finished my build of the Carbonda FM 1056 a few weeks ago.























Real nice!

I'm almost done with my parts, can you help me with the length of the bolts you used for the brake calipers? Thanks!

Bonpensiero

Re: Carbonda Cfr 1056
« Reply #91 on: May 30, 2021, 03:37:09 AM »
Thanks!


I do not remember. There were different lengths of screws included.

Aesch

Re: Carbonda Cfr 1056
« Reply #92 on: May 30, 2021, 03:46:25 AM »
OK thanks, I've managed to find the frame is 2cm so the bolts should be 33mm (for anyone searching).

svanimpe

Re: Carbonda Cfr 1056
« Reply #93 on: May 30, 2021, 04:21:27 PM »
Aesch, I assume you mean 25mm (instead of 2cm)? If so, you should get the required bolts with your groupset.

Bonpensiero

Re: Carbonda Cfr 1056
« Reply #94 on: May 30, 2021, 11:44:47 PM »
They are part of the groupset.

Aesch

Re: Carbonda Cfr 1056
« Reply #95 on: May 31, 2021, 02:22:16 PM »
Aesch, I assume you mean 25mm (instead of 2cm)? If so, you should get the required bolts with your groupset.

Nope, wing from Carbonda :

The frame is 20MM , You should choose 33mm mounting bolts
 

urbs

Re: Carbonda Cfr 1056
« Reply #96 on: June 24, 2021, 07:12:48 AM »
Has anyone thought about building up a 1056 with a farsports F1 handlebar? Does anyone have any idea what kit of spacer I would need to do so? I realise the 1056 is built around a FSA ACR, but I'm not sure how best the F1 can fit with that.

Aesch

Re: Carbonda Cfr 1056
« Reply #97 on: June 24, 2021, 09:32:21 AM »
It's completely sold out now I think.

It should fit with the ACR conversion kit that they offer on the ACR Fsa headset.

noodleshop

Re: Carbonda Cfr 1056
« Reply #98 on: June 24, 2021, 11:06:43 AM »
Finished my build of the Carbonda FM 1056 a few weeks ago.























That is a jawdroppingly stunning build my friend :) This frame is now at the top of my list, for an endurance/light gravel frame.

I'm curious about the tyre clearance out back; Carbonda states a maximum 700x32c but you mentioned that this will fit a 700x35c easily. May I trouble you for a closeup shot of the tyre clearances? Do you think this frame would work with 35c light knobblys? Thank you! :)

urbs

Re: Carbonda Cfr 1056
« Reply #99 on: June 25, 2021, 05:34:58 AM »
It's completely sold out now I think.

It should fit with the ACR conversion kit that they offer on the ACR Fsa headset.

Thanks! I've been in contact with farsports and am happy to wait. But they aren't sure which spacer kit I should take. Did you mean an ACR conversion kit that farspoorts offer? As I don't see one listed. Is it maybe the vision one? I wasn't sure as the image looks quite different. Or did you mean that FSA offer a conversion kit?

Aesch

Re: Carbonda Cfr 1056
« Reply #100 on: June 25, 2021, 01:18:02 PM »
If you select the steerer on the website there is a list of options, one is ACR.

Bonpensiero

Re: Carbonda Cfr 1056
« Reply #101 on: June 27, 2021, 11:07:44 AM »
That is a jawdroppingly stunning build my friend :) This frame is now at the top of my list, for an endurance/light gravel frame.

I'm curious about the tyre clearance out back; Carbonda states a maximum 700x32c but you mentioned that this will fit a 700x35c easily. May I trouble you for a closeup shot of the tyre clearances? Do you think this frame would work with 35c light knobblys? Thank you! :)

Thank you! The frame will fit 35c with knobblys. 


urbs

Re: Carbonda Cfr 1056
« Reply #102 on: June 28, 2021, 04:14:38 AM »
If you select the steerer on the website there is a list of options, one is ACR.

Thanks! I don't see it for some reason (all I can see is ARC, but maybe that is a typo). I will ask again.

uluvas

Re: Carbonda Cfr 1056
« Reply #103 on: June 29, 2021, 02:26:01 PM »
Thank you! And yes, it's possible.

I have the CFR1056 as well and was thinking to change the handlebar and frame to internal routing.
As far as i remember from the build, there was no routing from the inside of the fork to the brake. Is there a fork for the CFR1056 which has a routing from inside to the brake or how does internal routing work for this frame?

Best regards
Lukas

Aesch

Re: Carbonda Cfr 1056
« Reply #104 on: June 30, 2021, 12:50:51 PM »
Yes there are 2 different forks. You can choose when you order.