Author Topic: Carbonda Cfr 1056  (Read 118076 times)

fogi_kinakokos

Re: Carbonda Cfr 1056
« Reply #360 on: September 25, 2021, 11:46:56 AM »
I'm going rival AXS... I hate dealing with cables. I wish my brakes wireless as well. I run XX1;AXS on my MTB I love it so much.

Have you managed to find any store that have SRAM etap Rival in stock?
Best I have found is a store who says they will be able to send in 2-3months.

failstone

Re: Carbonda Cfr 1056
« Reply #361 on: September 25, 2021, 07:42:20 PM »
Got mine done last night and took it for a century today. Way more comfortable than my older bike that maxed out at 25s.

jstrawks

Re: Carbonda Cfr 1056
« Reply #362 on: September 26, 2021, 10:12:15 AM »
Got mine done last night and took it for a century today. Way more comfortable than my older bike that maxed out at 25s.

Beautiful bike. And an inaugural century! That's quite a shakedown cruise. I guess you know whether or not everything is perfect.

Parkerross

Re: Carbonda Cfr 1056
« Reply #363 on: September 26, 2021, 12:01:28 PM »
Have you managed to find any store that have SRAM etap Rival in stock?
Best I have found is a store who says they will be able to send in 2-3months.

Yep, Mine have been sitting on my shelf for a couple months waiting to be built up.

jstrawks

Re: Carbonda Cfr 1056
« Reply #364 on: September 26, 2021, 12:38:06 PM »
I won't see SRAM Force before Christmas.

fogi_kinakokos

Re: Carbonda Cfr 1056
« Reply #365 on: September 26, 2021, 03:29:51 PM »
Yep, Mine have been sitting on my shelf for a couple months waiting to be built up.

I am a bit jealous of you :)
Which store did you find them in, so I can check if there are any left?

curvenut

Re: Carbonda
« Reply #366 on: September 26, 2021, 11:08:40 PM »
Is this carbonda Cfr 1056 similar to a branded frame ?

urbs

Re: Carbonda
« Reply #367 on: September 27, 2021, 07:28:59 AM »
Is this carbonda Cfr 1056 similar to a branded frame ?

I think it is the same frame as the Dolan Tuono.

Parkerross

Re: Carbonda Cfr 1056
« Reply #368 on: September 27, 2021, 09:28:11 AM »
I am a bit jealous of you :)
Which store did you find them in, so I can check if there are any left?

I got them from incycle looks like they are out now.

Parkerross

Re: Carbonda Cfr 1056
« Reply #369 on: September 27, 2021, 06:21:02 PM »
My mechanic just called to say my brakes were done she said it was a challenge haha. I think she hates me now. Don't think she knew what she was getting herself into. So close to riding this beauty new wheels hopefully show up tomorrow.

jstrawks

Re: Carbonda
« Reply #370 on: September 28, 2021, 01:10:51 PM »
I think it is the same frame as the Dolan Tuono.

Wow, that is REALLY similar. My 1056 doesn't have that arc in the chainstays.

https://www.dolan-bikes.com/tuono-disc-carbon-road-frameset/

Parkerross

Re: Carbonda Cfr 1056
« Reply #371 on: September 28, 2021, 01:54:47 PM »
Just got my bike back from the mechanic. She was impressed with the cost and look of the 1056 to say the least. My new enve wheels will be here in a couple hours and my dt swiss wheels will be here tomorrow. Then I have to wrap the bars and then will be road ready. 

Don't mind my reverse mullet situation haha it was the only combo I had where I could have my brakes be working since the front 700 is setup for 15mm.
« Last Edit: September 28, 2021, 01:57:18 PM by Parkerross »

Aesch

Re: Carbonda
« Reply #372 on: September 30, 2021, 06:11:44 AM »
Wow, that is REALLY similar. My 1056 doesn't have that arc in the chainstays.

https://www.dolan-bikes.com/tuono-disc-carbon-road-frameset/

Must be the angle of the photo. It is the exact same frameset. I've got spare parts from dolan that actually have a stamp with "1056" inside.

jstrawks

Re: Carbonda
« Reply #373 on: September 30, 2021, 07:12:58 AM »
Must be the angle of the photo. It is the exact same frameset. I've got spare parts from dolan that actually have a stamp with "1056" inside.

I wondered about the angle.

So the only difference would appear to be that Dolan is still using a pressfit bottom bracket and Carbonda has moved on to BB86. I'll speculate that Dolan either will do, or has done and hasn't updated the photos on their site.

Nice to know one can get 1056 spares from another source.

Parkerross

Re: Carbonda Cfr 1056
« Reply #374 on: October 22, 2021, 04:07:31 PM »
I decided to scrap the 27.5s it was just too tight. The 37mm measured 700c fit fine. I put Rene Herse bon jon pass 35c in the rear on internal 24mm wheel they measure 37mm and stelicom pass 38c on the front measure to 37mm on an internal 19mm wheel.

So happy with how this carbonda turned out