LCFS947 - 160mm 4-bar 27+/29

[Tjhosan]

I did printed out the mudguard that shared by Tjhosan to see is it fit float x2,
however it is a blind section, i guess it is ok, as i survive 2 feet drop and huge road gap without cracking the mudguard..

If you want i can make the cutout bigger in the mudguard! Just tell me how much more clearance you need, if i can get the diameter of the float x2 and how far from the bottom eyelet that diameter is i can model it easy.
Glad someone found it useful! 

[G161]

sorry for my English, i am Malaysian, bear with it

here i gonna share my build that finish last week, and been participated a DH competition in malaysia mersing,
frame size is M size

Parts :
FOX 36 grip 2 160mm
FOX float X2
Formula CURA 4 4 piston brake
(gonna change to deore 4 pot due to compatibility to frame and deore 4 pot is the best brake and value in my humble opinion)
Shimano m9100 rotors
MULLET setup: entity SLX 29/27.5 (from polygon T8/7)  gonna try LC rim when the bills pile up
Shimano deore 1x12 CS
Shimano deore FC crank
Shimano XTR RD
Shimano pro 50mm stem
Shimano pro handle bar
Shimano pro seatpost
FOX transfer 175mm dropper (not recommend it, too long even with 180cm height)
vinyl wrap Mazda soul red but turnout it more like a charry red

I did printed out the mudguard that shared by Tjhosan to see is it fit float x2,
however it is a blind section, i guess it is ok, as i survive 2 feet drop and huge road gap without cracking the mudguard..

geometry is superb, came from polygon t8 L size 29er user, this bike felt light to control on air, fun, rock garden section became so much controllable compare to T8

to the dropper length, 175mm dropper definitely is a huge NO for m size frame, i barely use 125 of droppers travel, and i am a 180cm height person
the 130mm insert is not enough to make the dropper comfortable either climbing nor moving in the air.
gonna change to 150mm dropper, and i guess it will be perfect as it will lower down at least 25mm length at retreated position.

Be careful with that X2. It doesn't fit the frame, I returned mine because it was touching the frame.

[Draz]

sorry for my English, i am Malaysian, bear with it

here i gonna share my build that finish last week, and been participated a DH competition in malaysia mersing,
frame size is M size

Parts :
FOX 36 grip 2 160mm
FOX float X2
Formula CURA 4 4 piston brake
(gonna change to deore 4 pot due to compatibility to frame and deore 4 pot is the best brake and value in my humble opinion)
Shimano m9100 rotors
MULLET setup: entity SLX 29/27.5 (from polygon T8/7)  gonna try LC rim when the bills pile up
Shimano deore 1x12 CS
Shimano deore FC crank
Shimano XTR RD
Shimano pro 50mm stem
Shimano pro handle bar
Shimano pro seatpost
FOX transfer 175mm dropper (not recommend it, too long even with 180cm height)
vinyl wrap Mazda soul red but turnout it more like a charry red

I did printed out the mudguard that shared by Tjhosan to see is it fit float x2,
however it is a blind section, i guess it is ok, as i survive 2 feet drop and huge road gap without cracking the mudguard..

geometry is superb, came from polygon t8 L size 29er user, this bike felt light to control on air, fun, rock garden section became so much controllable compare to T8

to the dropper length, 175mm dropper definitely is a huge NO for m size frame, i barely use 125 of droppers travel, and i am a 180cm height person
the 130mm insert is not enough to make the dropper comfortable either climbing nor moving in the air.
gonna change to 150mm dropper, and i guess it will be perfect as it will lower down at least 25mm length at retreated position.

One of the cleanest build so far, I loved the color. I'm having size large and want to know if anyone tried oneup v2 180mm(maybe shimmed to 170)?
I'm using brandx 150mm it fits only ok a little short when full length.
Wondering if oneup 180 allow enough room or 150 is the only option.

[vidlee]

Your Fox X2 is probably hitting the frame here (see picture) and not getting full shock travel.

[Bennykyu]

If you want i can make the cutout bigger in the mudguard! Just tell me how much more clearance you need, if i can get the diameter of the float x2 and how far from the bottom eyelet that diameter is i can model it easy.
Glad someone found it useful! 

Thank for the offering, so far no trouble using the mudguard
Is hard to take x2 out again to check as all my screw I use locktite..
I will try to search or request for customer drawing for x2

Your Fox X2 is probably hitting the frame here (see picture) and not getting full shock travel.

Be careful with that X2. It doesn't fit the frame, I returned mine because it was touching the frame.

.

Thank for the sharing, i do notice there will be possible to hit the frame during assembly
However when riding, it feel nothing to me, no cracking sound no sudden impact on frame when hopping and jumping
 I use some rubber to cover the frame.
Plan is to have some imprint on the frame, if I find dent on x2, then I will change suspension to rockshock super deluxe

One of the cleanest build so far, I loved the color. I'm having size large and want to know if anyone tried oneup v2 180mm(maybe shimmed to 170)?
I'm using brandx 150mm it fits only ok a little short when full length.
Wondering if oneup 180 allow enough room or 150 is the only option.

Tyty, just be mind that insert length is quite short, you could always request customer drawing on wed site and use some woodstick to cut to length to check the thing.. I should done it initially

[CasualRider]

Keep us updated on the shock

From the Sciu and Quest sites. They listed X2 and rockshox deluxe ultimate as shock options.

It'll be great news if it works out for you.

[StefanB]

I have built another  LCFS 947 just for the fun of it. This one is built" on a budget" with good parts but to keep the price down, My intention is to sell the bike for the building cost because its so fun to build bikes :-)







RAM   LCFS947 - Kolfiber - Storlek Large
Dekaler   Dekaltrim   Akkebike
Vevlager   Shimano   BB-MT501 SLX
Vevparti   Shimano   Deore M6120 -170 mm - 32T
Bromsar   Shimano   BL-MT401/410
Styrstam   Katana   OS Stem 35
Styre   Newmen   Evolution 318 – 760 mm
Handtag   RFR   Pro HPP
Dropper   Triple Eight   PRO Inside 120 eller 150 mm
Sadel   RFR   MTB Sport D2
Ramskydd   Zefal   DTA
Bakdämpare   Rockshox   Deluxe RL 185*50 = 147 mm fjädring bak
Framgaffel   Rockshox   35 Silver R,  150 mm
Framskärm   Triple Eight   Mudguard II
Pedaler   Radon PF   Radon PF
Lagerspacers   RFR    Spaceset
Växelwire   Jagwire   SportShift
Hjul      Shimano WH-MT500 29"  Boost 12x148mm/15x110mm
Däck   Schwalbe   Nobby Nic TS Addix 2.4
Slang   Continental    MTB29
Bakväxel   Shimano   Deore MD-5100
Växelreglage   Shimano   Deore SL-M5100
Kasett   Shimano   Deore CS-5100 11-51
Kedja   Shimano   CN-HG601 11S
Bromsskivor   Shimano   SM RT-30 180/203

[StefanB]

And one more LCFS947, this one in size M. Built for the fun of building for a friend of mine.

[michaeldepeza]

I have built another  LCFS 947 just for the fun of it. This one is built" on a budget" with good parts but to keep the price down, My intention is to sell the bike for the building cost because its so fun to build bikes :-)







RAM   LCFS947 - Kolfiber - Storlek Large
Dekaler   Dekaltrim   Akkebike
Vevlager   Shimano   BB-MT501 SLX
Vevparti   Shimano   Deore M6120 -170 mm - 32T
Bromsar   Shimano   BL-MT401/410
Styrstam   Katana   OS Stem 35
Styre   Newmen   Evolution 318 – 760 mm
Handtag   RFR   Pro HPP
Dropper   Triple Eight   PRO Inside 120 eller 150 mm
Sadel   RFR   MTB Sport D2
Ramskydd   Zefal   DTA
Bakdämpare   Rockshox   Deluxe RL 185*50 = 147 mm fjädring bak
Framgaffel   Rockshox   35 Silver R,  150 mm
Framskärm   Triple Eight   Mudguard II
Pedaler   Radon PF   Radon PF
Lagerspacers   RFR    Spaceset
Växelwire   Jagwire   SportShift
Hjul      Shimano WH-MT500 29"  Boost 12x148mm/15x110mm
Däck   Schwalbe   Nobby Nic TS Addix 2.4
Slang   Continental    MTB29
Bakväxel   Shimano   Deore MD-5100
Växelreglage   Shimano   Deore SL-M5100
Kasett   Shimano   Deore CS-5100 11-51
Kedja   Shimano   CN-HG601 11S
Bromsskivor   Shimano   SM RT-30 180/203

how much would you consider selling it for?

[StefanB]

its located in Göteborg - Sweden.

[michaeldepeza]

Damn bro...your builds are sweet...Question?

how come you dont run chainguides on any of your builds?

im looking to do one of these as my enduro rigs,i live in the Caribbean.

[StefanB]

Thanks 

I haven't had any problems with chains drooping.  But I have put chain guides on some builds:

[Tjhosan]

Winters are long here in northern sweden so i did some more cad work.
This came to be because i could not use my fidlock bottle holder with my oneup pump mount. The bottle needs to be able to twist to release and would hit the pump.
My design puts the pump lower out of the way. And then i got to thinking it would be fun to "even out" the design with something on the other side of the bottle holder. So i put a little box there that fits two co2 cartridges, but it can hold other stuff aswell. It is designed to fit the downtube quite snuggly, just enough room for some padding material.
I printed it in carbon fiber reinforced nylon but could be printed in abs or some other strong filament.
If anyone is interested i can upload the files!

[carbonazza]

...I printed it in carbon fiber reinforced nylon but could be printed in abs or some other strong filament.
If anyone is interested i can upload the files!

What printer do you use for carbon fiber reinforced nylon?

[Tjhosan]

What printer do you use for carbon fiber reinforced nylon?

I got a RatRig V-core3 with heated enclosure for printing nylon.