Lexon "Riot 10"

[saintrider]

In my case it was this one.....it was going to be a temporary solution but is rather permanent ....

https://www.decathlon.pt/p/porta-bidon-de-bicicleta-com-entrada-lateral/_/R-p-330983?mc=8640163

You can mount it either way....to the left or to the right.

[RongGearRob]

I went with the Specialized Zee Cage II, you can get with a multitool attached to the bottom of the cage as well part of their SWAT system.  I just went with bottle cage. 

https://www.jensonusa.com/Specialized-Zee-Cage-II-1

Also Problem Solvers has a bottle cage adapter to move the cage further down the downtube.

https://www.jensonusa.com/Problem-Solvers-Cage-Height-Adapter-Black-45mm-Of-Adjustment?loc=usa

[saintrider]

For the Extensions i went with this one from topeak...
https://www.tradeinn.com/bikeinn/pt/topeak-porta-bidao-alt-position-cage-mount-drum-holder/137469534/p?utm_source=google_products&utm_medium=merchant&id_producte=10319803&country=pt&gclid=EAIaIQobChMIsLuo_JLB9wIVc_x3Ch0NgAaNEAQYBSABEgIui_D_BwE&gclsrc=aw.ds

[RongGearRob]

Went for a ride this afternoon and took a photo of the water bottle clearance - It appears using an adapter will allow for room to carry a bigger bottle.

[Patch64]

Went for a ride this afternoon and took a photo of the water bottle clearance - It appears using an adapter will allow for room to carry a bigger bottle.

Thanks for the picture, and yes, seems pretty tight but feasible.
As I really like to ride without a backpack, I need space on the frame for water and tooling.

[Silverado123]

The Riot is definitely my frame of choice but its not without its faults. A big one for me is the long seat tube. If i get one maybe cutting 20mm off,  idk.
I get the vibe that the frame is fairly stout and stiff. Am l correct with that ldea? Thats a big factor for me as l don't want a flexy wet noodle.

[RongGearRob]

The Riot is definitely my frame of choice but its not without its faults. A big one for me is the long seat tube. If i get one maybe cutting 20mm off,  idk.
I get the vibe that the frame is fairly stout and stiff. Am l correct with that ldea? Thats a big factor for me as l don't want a flexy wet noodle.

a

Frame seems stiff to me, not sure about cutting down the seat tube though.  I'm running a 150mm dropper in my large frame, it hasn't been an issue and I don't feel like I need more clearance.

[FullCarbonAlchemist]

I don’t see how you could possibly cut the vast majority of carbon seat tubes since there is almost universally a taper at the end for the seatpost clamp…

[Silverado123]

What bottom brackets are you all using? Is it compatible with a 30mm spindle?

[Draz]

This bike has BSA73 BB, standard threaded bb cups usually fit this bike whether shimano or sram

[Silverado123]

So basically it's a standard threaded bb thats 73mm wide.. a 30mm spindle will work right?

I thought a read that people were having troubles with the threads with the bottom bracket. Is this common with the frame?

[RongGearRob]

The BB that came with bike was not the highest quality, it was cheap IMO.  I ended up going with Sram Dub crankset and BB.  No issues with the install.

[Silverado123]

I just placed an order for a white frame in size L. Estimated delivery June 8th. I wonder if a Cane Creek InLine shock would fit. Its on an old fm06 and it made a world of difference in performance over the Rock Shox..

[Silverado123]

What headset are you guys using?  44/56 integrated headset; the 56 lower is hard to find.

[RongGearRob]

A compression headset came with the frame, however I installed my old headset (with a few cheap carbon spacers I got off Amazon) since I'm using my old fork that has a starnut.  This is going to change, I've just purchased the Granite Stash multi-tool that will go in the steerer tube.  I looked at OneUp but the only version I that would work is the original EDC tool that requires the steerer tube to be threaded.