I finally built the bike and take one week of riding on a trainer, everything work nice, no creaking or clicking, seatpost doesn't slip despite the fact that I did not use grip paste and cut seatpost so clamp doesn't contacted with grippy coating.
The build was relatively easy, no stuck cables or bad threads, calipers and bottom bracket are align.
But there was a several nuances during the build:
1) Sharp edge where cables exits from handlebar (under the "stem" area), not enough to cut housings, but enough to scratch them and make routing process more difficult. So i sanded it.
2) Expander plug fit in steerer tube very tight and i can't extract it without tools, so i sanded some material from plug. But i think, this is plug problem, not steerer tube, because expander plug from my old bike fits with no problem.
3) Stuffing four housings in headset pressing ring was real pain in my ass, there is enough space for them but no more than that.
4) Computer mount, which comes with handlebar is flexy, and I'm afraid it might break on bumps. Here some video only with garmin edge 520
https://photos.app.goo.gl/6zJ4M9U8mGiqyUYu8And with 200g bike light
https://photos.app.goo.gl/h3aWyDJYAE5Yg76n8So I'm looking for more rigid computer mount.
But overall it's a good frameset, it's stiffer in bottom bracket area than my old Jamis Xenith Race (2014), handlebar shape nice and comfortable, laser decals looks amazing.
Final weight is 7.685 kg with pedals, bottle cages, computer mounts and sensors, I took into account all the components that are attached to the frame.
