Chinese Carbon MTB > 29er
japjoe7 Carbonda FM1001 build thread
japjoe7:
First dual suspension bike. Been riding a hardtail for many years. Can't afford to throw down $4k-$6k in one shot so I'm leveraging AliExpress and using used parts. It's still expensive of course but a least I can build it up over the next 6 months. Here is my list of components so far. and attached Excel spreadsheet with cost. The build will be a little dynamic in that I will change some conponents choices depending on how I'm feeling and research. I still have a bunch of stuff to add to my list.
Btw, I'm from Pennsylvania in the US.
Price sheet is below labeled Bike Build 1.3.PDF (Edit: fixed format)
Carbonda FM1001 Medium
Carbonda Rear Axle
Carbonda Headset
Carbonda Rear Universal Derailleur Hanger
Used: '22 Fox Float X2, 185x55, Trunnion
Used: '23 Rockshox Lyrik Ultimate, 150mm, Shiny Black
TSS 2K Epoxy Black Primer, Raven Super Colorshift Mid Coat, 2K Epoxy Gloss Top Coat
FSA Headset NO. 55R 1.5"/558, Part #13000022000010
FSA 1.5' Steel ZS Crown Race
Headset Spaces, Aluminum, 6pcs
TOSEEK ZF-ONE Carbon Handlebar, 31.8x660mm Rise
HASSNS Stem, 31.5x35mm, Purple and Oil Slick
RYET Seatpost Clamp, 34.9mm, Purple and Black
Kindshoch KS EXA seatpost dropper, 30.9x170mm
OneUp Components Remote Dropper Lever V3, purple cushion, MMX clamp adapter
Internal Cable Foam Damper
Nukeproof Mega Alloy MTB Chain Stay Protector 290
Used: Sram GX Eagle AXS Derailleur Kit
Used: Sram X01 Eagle XG-1295 Cassette. 52t
Sram GX Eagle Carbon Crankset, 170mm, 32t
Sram BB, BSA DUB 68mm/73mm
Sram Pc-X01 Eagle 12 Speed Chain, 12 Speed, 126 Links
Shimano M8100 Brake Set, Resin
Shimano RT70 Rotors, Center Lock, 180mm
SRAM Avid Matchmaker clamps and adapters, Left/Right
RYET 29 Asymmetric Carbon Wheels, 28 hole, 33mm wide, 440g
ZTTO M1 Boost Hubs, 28 Hole, 54T Ratchet, XD
Light Pillar PSR TB2015, Triple Butted, 32 x 292mm/20 x 293mm/20 x 294mm
Pillar PB14 Round Head Brass Nipples, Black, 12mm, 64pcs and Pillar PW8630 Nipple Washers, 50pcs
Kenda Rush Pro or Boost Pro Tires, 29x2.4, SCT
japjoe7:
While I'm waiting on a bunch of stuff to be delivered from AliExpress. Food for thought. I'm using ZTTO M1 hubs(DT Swiss 180), RYET 28 hole rims, Pillar straight spokes in a 3 cross pattern. This'll be interesting. DT Swiss calulator says I can do 3 cross this way. I bought the spokes based on this calulation. Thoughts?
Kommandant33:
Brilliant - I am thinking about moving across to this frame - currently riding a Polygon Siskiu t7 that I have upgraded just about all components of, so I would be doing a frame swap.
What brakes are you going with?
Are all prices in USD?
japjoe7:
--- Quote from: Kommandant33 on August 02, 2023, 07:53:57 PM ---Brilliant - I am thinking about moving across to this frame - currently riding a Polygon Siskiu t7 that I have upgraded just about all components of, so I would be doing a frame swap.
What brakes are you going with?
Are all prices in USD?
--- End quote ---
Oh yeah, I missed the brakes in there haha. They are Shimano M8100 with resin pads from Ali. Added to the list above. Yes, in USD. Also, fixed the PDF price sheet.
jannmayer:
--- Quote from: japjoe7 on August 02, 2023, 01:12:36 PM ---While I'm waiting on a bunch of stuff to be delivered from AliExpress. Food for thought. I'm using ZTTO M1 hubs(DT Swiss 180), RYET 28 hole rims, Pillar straight spokes in a 3 cross pattern. This'll be interesting. DT Swiss calulator says I can do 3 cross this way. I bought the spokes based on this calulation. Thoughts?
--- End quote ---
With straight pull spokes, the cross pattern is determined by the drilling angle on the hub. My 28 hole hubs were 3 cross so I suspect that is correct for you as well, but it would be a good diea to verify before starting to lace the wheel. Just stick a few spokes through the holes and see how many crossings you end up with.
Navigation
[0] Message Index
[#] Next page
Go to full version